67-1
ABS / stability-control fault code, listed for 1 vehicle line from Acura. What it means on each one, from published sources, and when the module is the cause.
What 67-1 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of 67-1 | Source |
|---|---|---|
| 2007-2013 Acura MDX (2nd gen, YD2) | Stored with an intermittent VSA indicator or trailer stability assist warning (or a shift lever that will not leave Park) | static.nhtsa.gov source ↗ |
Vehicles and units that set 67-1
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Acura MDX (2nd gen, YD2) | 2007-2013 | Honda / Acura VSA modulator | From $499 | 4 |
What is published about failures on these lines
- 2007-2013 Acura MDX (2nd gen, YD2): On 2007-2011 MDX an intermittent VSA indicator or trailer stability assist warning with VSA DTC 59-1, 66-1, 67-1 or 69-1 (or a shift lever stuck in Park) comes from a faulty brake pedal position switch; the fix is a new switch, not a VSA modulator. source ↗
Is 67-1 the ABS module?
67-1 is listed for 1 vehicle line from Acura; the meanings above fall under the “Maker-specific flash and group codes” family of codes.
This family covers codes written in a maker’s own numbering rather than the shared SAE “C” and “U” format: the two- and three-digit codes Honda and Acura VSA units report (with a sub-code after the dash, like 66-11), and the five-digit group codes VW and Audi units store. The same number means something different on another make, and some of these codes are catch-all entries that store next to a more specific one. Read the meaning for your make above, and the sub-code, before deciding what it points at.
Is the module the likely cause? Sometimes
For this family of codes the module is one possible cause among several. A maker-specific code can describe anything from a wheel sensor to an internal failure, so the code family alone does not say whether the module is the cause — the meaning for your make does. Where the meaning names a sensor, wiring or supply, work from the outside in; where it names the modulator, the control unit or an internal circuit, the module is the likely cause once power and ground are confirmed.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Read the code with a tool that speaks your maker’s protocol, and note the full code with its sub-code (the part after the dash) — a generic tool can show a different number or none.
- Write down every code stored, in every module; a general code can be stored next to the specific one that caused it.
- Match the code against the meaning for your make above, then follow the checks for that part: the wheel sensor and its wiring, the pump fuse, the brake-light switch, or the connector at the unit.
- Clear the codes and drive the vehicle; note which codes return and whether they return at once or only above a certain speed.
- If the meaning names the modulator, the control unit or an internal circuit and power and ground are good, stop there — that is bench work.
What the lab does for a code in this family
The maker’s numbering does not change the bench work: we read the module’s own fault memory, test the drivers, inputs, power stage and internal connections, repair the board and run the full bench test.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Honda / Acura VSA modulator1 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to 67-1.
67-1 — questions
What does 67-1 mean on a Acura?
On the Acura line in our data, 67-1 is listed as: Stored with an intermittent VSA indicator or trailer stability assist warning (or a shift lever that will not leave Park). In general terms it belongs to the “Maker-specific flash and group codes” family — a maker’s own code number — Honda/Acura two- and three-digit codes, VW/Audi five-digit group codes — with its own meaning per make.
Can I drive with 67-1?
What a maker-specific code allows depends on what it names — a stored VSA or ABS code switches those systems off while the base brakes keep working. If the red brake warning light is on or the pedal feels different, have the vehicle checked before driving it. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is 67-1 the ABS module or a sensor?
For this family of codes the module is one possible cause among several. A maker-specific code can describe anything from a wheel sensor to an internal failure, so the code family alone does not say whether the module is the cause — the meaning for your make does. Where the meaning names a sensor, wiring or supply, work from the outside in; where it names the modulator, the control unit or an internal circuit, the module is the likely cause once power and ground are confirmed.
How much does it cost to fix 67-1?
Repair of your own module starts at $499 for the vehicles that set 67-1; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will 67-1 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Still not sure?
Send us 67-1, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
67-1 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com