Audi · repair from $499

Audi ABS module repair

Every Audi line we've mapped — 9 vehicle lines from 1998–2020 and 53 sourced part numbers — with the ABS unit each one uses. Repair your own module from $499; it comes back with your VIN and coding, no dealer programming.

Model not listed? We repair Audi ABS modules beyond this list — start an any-make repair or send us the label.

ABS units in Audi vehicles

Grouped the way we price and bench them. Each family page lists every vehicle in it, across makes.

Known Audi ABS failures

What the sources report for these models, before anything else is replaced.

2006-2013 Audi A3 (8P)
A rebuilder: 16352 indicates an internal issue within the ABS ECU (ATE MK61) on the Audi A3 8P; a rebuilder says faults in the ABS motor, block and pump keep the Golf / A3 / TT ABS light on. source ↗
2015-2020 Audi A3 / S3 (8V)
A rebuilder lists no communication with the ABS module, ABS warning lights on, wheel-speed-sensor codes and an electronic parking brake that sticks on or will not engage on one or both sides for the MK100 46-pin module. source ↗
2016-2020 Audi A4 / A4 allroad / A5 (B9)
A rebuilder lists code C123EF0 (hydraulic brake booster limit value reached), no communication with the ABS module, invalid data from the module, wheel-speed-sensor codes and ABS valve supply voltage circuit open as common failures of these Bosch 9.0 units. source ↗
1998-2003 Audi A4 / S4 (B5)
A rebuilder gives 'Loss of communication' as the common failure symptom for this Bosch 5.3 module; a rebuilder's 5.3 rebuild addresses loss of communication, intermittent functionality and wheel-speed-sensor faults by restoring failed internal connections. source ↗
2008-2012 Audi A4 / S4 / A4 Avant (B8)
A rebuilder lists loss of communication, pump or solenoid failures, wheel-speed-sensor issues and brake-pressure-sensor codes for its Bosch 8.0 Audi repair; a rebuilder adds speedo-not-working and 'Traction + ABS Light On'. source ↗
2002-2008 Audi A4 / S4 / A4 Cabriolet (B6, B7)
A rebuilder lists loss of communication, pump or solenoid failures and wheel-speed-sensor issues as the common failures of the Bosch 5.7 module on 2002-2005 A4/A6/A8. source ↗

Reading a Audi ABS part number

Volkswagen / Audi (VAG OEM)

Prefix (3 chars) + group + base + optional 1-3 letter suffix. Control units: 907 379 (Bosch 5.3: 998 375; some 907 375). Hydraulic units: 614 517 / 614 109 / 614 117 / 614 111, often listed with a 'BEF' (filled) or '-REP' suffix. Printed with spaces, dashes or nothing. source ↗

e.g. 1C0907379K · 1K0-614-517-ED-BEF · 8E0 998 375 G

ATE / Continental Teves (supplier number, all brands)

Read as 10.0xxx-xxxx.x: control units 10.0960-/10.0961-/10.0926-/10.0948- with '.3', hydraulic units 10.0212-/10.0204-/10.0399- with '.4'. Often run together as 11 digits (10021200214 = 10.0212-0021.4 on the same a rebuilder.com page). source ↗

e.g. 10.0960-0818.3 · 10.0961-0820.3 · 10.0212-0044.4

Bosch (supplier number, all brands)

10-digit Bosch number on a white label. Control units 0 265 9xx xxx (5.7: 0 265 950/900 xxx; SBC: 0 265 960 0xx); Bosch 5.3 control units 0 273 004 xxx; 0 265 2xx xxx also seen. a rebuilder writes short forms ('950-080', '358'). source ↗

e.g. 0 265 950 080 · 0265950958 · 0 273 004 358

ABS codes seen on Audi models

16352 — Control Module Faulty: Electrical Error - a rebuilder: internal failure within the ABS unit (ATE MK61)
01130 — ABS Operation: Implausible Signal
01316:013 — ABS Control Module: No Signal/Communication
01418 — Switch valve 1
01421 — High pressure valve 2
00668 — Supply Voltage Terminal 30: Implausible Signal
01276 — Hydraulic Pump Outside Tolerance (a rebuilder wording 'DTC 1276 Hydraulic Pump Outside Tolerance')
C123EF0 — Hydraulic Brake Booster Limit Value Reached
C2200-46 — Calibration/Parameter Memory Failure - a rebuilder states it CANNOT fix this on MK60E units
U101700 — ABS Control Module Communication

Audi ABS module questions

Which Audi ABS modules do you repair?

This page lists 9 Audi vehicle lines from 1998–2020, built around 6 ABS unit families. Models outside the list are taken too — order the any-make repair and we identify the unit from the label.

How much is Audi ABS module repair?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95; the label to us is prepaid.

Where is the part number on a Audi ABS module?

On the label of the electronic module itself. Prefix (3 chars) + group + base + optional 1-3 letter suffix.

ABS light on? Fix the module you already own.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping · 1-year warranty · rush 2–3 days +$100

Start My Repair Look Up My Part Number

Call (817) 505-4201 · 📱 Text us a photo of the module label · Ask first — send a label photo · Email repairs@absmodulelab.com