ABS Module Lab

Dodge · repair from $325

Dodge ABS module repair

Every Dodge line we've mapped — 10 vehicle lines from 1998–2020 and 305 sourced part numbers — with the ABS unit each one uses. Repair your own module from $325; it comes back with your VIN and coding, no dealer programming.

An ABS hydraulic block with a row of brake-line fittings in an engine bay, a red-lit brick wall blurred beyond the raised hood (illustration for Dodge ABS module repair)
Some Dodge models share their ABS unit with twins sold under another make — those lines are listed under the make the source used, and they are the same job on our bench.

Model not listed? We repair Dodge ABS modules beyond this list — start an any-make repair or send us the label.

Known Dodge ABS failures

What the sources report for these models, before anything else is replaced.

  • 2005-2020 Chrysler 300 (LX/LD)

    'The ABS pump and module fitted to Dodge Chargers produced between 2006-2007 suffers from malfunction due to a breakdown of the internal components', storing C2200 (module internal failure) and C2116 (pump motor supply low voltage).

  • 2011-2020 Dodge Durango (WD)

    Some 2018-2019 hydraulic control unit / ABS modules falsely read pressure in the primary brake circuit: the brake lights can stay on, ABS and ESC can be disabled with the ABS, ESC and red Brake lights on at start-up, and the vehicle can start and shift out of park without the brake pedal pressed. source ↗

  • 2008-2020 Dodge Grand Caravan (RT)

    DodgeForum (2011 Grand Caravan, ~170K miles): C2200 with the ABS electronics 'intermittently applying brakes during city driving'; options discussed were a used module plus re-initialisation, or a $250-$300 rebuild. source ↗

  • 2009-2020 Dodge Journey (JC)

    It sells the module pre-programmed to the VIN.

  • 2002-2008 Dodge Ram 1500 (DR)

    'Internal Main Relay' (DTC 65/66) and 'Pump Motor Fault' (DTC 67/68). 2006+ TRW units: 'No communication with module', 'ABS Pump Stuck On', 'Intermittent Functionality'.

  • 1998-2005 Dodge Ram 1500/2500/3500 (BR/BE, DR/DH)

    'Pump motor running' issues and internal relay faults (DTC 65/66 internal main relay, DTC 67/68 pump motor fault); ABS pump constantly running with C0265 / code 25.

Reading a Dodge ABS part number

Mopar (Chrysler / Dodge / Jeep / Ram) - current 68xxxxxx

Eight digits followed by a two-letter revision suffix, e.g. 68259556AD. AA is the original release and the suffix advances AB, AC... as the part is revised. source ↗

e.g. 68259556AD · 68067457AA · 68438389AB

Mopar (Chrysler / Dodge / Jeep / Ram) - legacy 5xxxxxx

Older Chrysler numbers are a 7- or 8-digit numeric string plus a two-letter revision suffix (e.g. 5083285AA). A leading zero is only a catalog formatting prefix: 5083285AA and 05083285AA are the same part. source ↗

e.g. 52126282AC · 05179771AA

Mopar - older suffix-less numbers (1990s modules)

Some 1990s Chrysler ABS parts are catalogued with a bare 8-digit number and no two-letter revision suffix, e.g. 56026812 and 52004508 (1994-1997 Ram 1500 RWAL module / HCU in the Mopar catalog). source ↗

e.g. 56026812 · 52004508 · 56027271

Bosch (supplier number, all brands)

10-digit Bosch number on a white label.

e.g. 0 265 950 080 · 0265950958 · 0 273 004 358

Safety recalls to check first

  • 2011-2020 Dodge Durango (WD): Some 2018-2019 hydraulic control unit / ABS modules falsely read pressure in the primary brake circuit: the brake lights can stay on, ABS and ESC can be disabled with the ABS, ESC and red Brake lights on at start-up, and the vehicle can start and shift out of park without the brake pedal pressed. source ↗

ABS codes seen on Dodge models

  • C2100 — Battery (supply) voltage low
  • C2101 — Battery voltage high
  • C2112 — Sensor supply 1 voltage circuit high
  • C2200 — Anti-Lock Brake Module Internal Failure
  • C2200-49 — ABS Module has detected an internal electronic error
  • 65 — Internal Main Relay
  • 66 — Internal Main Relay
  • 67 — Pump Motor Fault
  • 68 — Pump Motor Fault
  • C0265 — 'C25 / CO265 error code' and 'ABS pump is constantly running' as the common issue on 1998-2005 Ram Kelsey-Hayes 325 modules (no Chrysler definition given on the page)
  • C2116 — ABS Pump Motor Supply Low Voltage
  • U0121 — Lost communication with ABS Module

Dodge ABS module questions

Which Dodge ABS modules do you repair?

This page lists 10 Dodge vehicle lines from 1998–2020, built around 4 ABS unit families. Models outside the list are taken too — order the any-make repair and we identify the unit from the label.

How much is Dodge ABS module repair?

Repair of your own module starts at $325; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95; the label to us is prepaid.

Where is the part number on a Dodge ABS module?

On the label of the electronic module itself. Eight digits followed by a two-letter revision suffix, e.g.

Are there ABS recalls on Dodge vehicles?

NHTSA lists a recall on the ABS unit of 1 Dodge vehicle line (named below). Check your VIN at nhtsa.gov/recalls before sending a module in — an open recall is repaired free by the dealer.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

ABS light on? Fix the module you already own.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com