C2116
ABS / stability-control fault code, listed for 11 vehicle lines from Chrysler, Dodge, Jeep, Ram. What it means on each one, from published sources, and when the module is the cause.
What C2116 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of C2116 | Source |
|---|---|---|
| 2002-2007 Jeep Liberty (KJ) | ABS Pump Motor Supply Low Voltage | on file |
| 2005-2010 Jeep Grand Cherokee (WK) | ABS Pump Motor Supply Low Voltage | on file |
| 2007-2017 Jeep Compass (MK49) | ABS Pump Motor Supply Low Voltage | on file |
| 2007-2018 Jeep Wrangler (JK) | ABS Pump Motor Supply Low Voltage | on file |
| 2008-2012 Jeep Liberty (KK) | ABS Pump Motor Supply Low Voltage | on file |
| 2011-2021 Jeep Grand Cherokee (WK2) | Pump Motor Fault / Pump Supply Low Voltage | on file |
| 2008-2020 Dodge Grand Caravan (RT) | ABS Pump Motor Supply Low Voltage | on file |
| 2009-2020 Dodge Journey (JC) | ABS / ESC module fault code | on file |
| 2009-2018 Ram 1500 (DS) | Pump Motor Fault / Pump Supply Low Voltage | on file |
| 2019-2020 Ram 1500 (DT) | Pump Motor Fault / Pump Supply Low Voltage | on file |
| 2005-2020 Chrysler 300 (LX/LD) | ABS Pump Motor Supply Low Voltage | on file |
Vehicles and units that set C2116
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Jeep Liberty (KJ) | 2002-2007 | Continental MK70 | From $499 | 9 |
| Jeep Grand Cherokee (WK) | 2005-2010 | ATE / Continental MK25 | From $499 | 11 |
| Jeep Compass (MK49) | 2007-2017 | ATE / Continental MK60 / MK61 | From $499 | 29 |
| Jeep Wrangler (JK) | 2007-2018 | ATE / Continental MK60 / MK61 | From $499 | 34 |
| Jeep Liberty (KK) | 2008-2012 | Bosch ABS / ESP 8 | From $499 | 8 |
| Jeep Grand Cherokee (WK2) | 2011-2021 | ZF | From $499 | 31 |
| Dodge Grand Caravan (RT) | 2008-2020 | Identified on the bench | From $499 | 17 |
| Dodge Journey (JC) | 2009-2020 | ATE / Continental MK60 / MK61 | From $499 | 31 |
| Ram 1500 (DS) | 2009-2018 | TRW EBC 345 / 440 / 450 | From $499 | 16 |
| Ram 1500 (DT)Recall listed — check your VIN first | 2019-2020 | Continental | From $499 | 11 |
| Chrysler 300 (LX/LD) | 2005-2020 | Mopar sells the ABS 'Module' separately from the 'Hydraulic Control Unit' for most years | From $499 | 86 |
What is published about failures on these lines
- 2019-2020 Ram 1500 (DT) — safety recall on this unit: An ABS module software condition can disable electronic stability control, with the ABS, ESC, adaptive cruise and forward collision warning lights on at start-up; the fix is an ABS module software update. source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2005-2010 Jeep Grand Cherokee (WK): 'C2200 - control module internal fault' and 'No communication with ABS control module' for its 2010-2016 multi-Jeep control-module repair; its 2006-2016 pump repair lists low-voltage faults, pump motor power-supply faults, pump motor fault, no communication, faulty control module and pressure sensor faults.
- 2007-2018 Jeep Wrangler (JK): 'Fault code C2200 signifies an internal failure in your Jeep's ABS module' (2010-2016 Wrangler); replacement modules are described as 'extremely costly and often backordered'.
- 2008-2012 Jeep Liberty (KK): Repaired module needs no programming.
- 2008-2020 Dodge Grand Caravan (RT): DodgeForum (2011 Grand Caravan, ~170K miles): C2200 with the ABS electronics 'intermittently applying brakes during city driving'; options discussed were a used module plus re-initialisation, or a $250-$300 rebuild. source ↗
- 2009-2020 Dodge Journey (JC): It sells the module pre-programmed to the VIN.
- 2019-2020 Ram 1500 (DT): An ABS module software condition can disable electronic stability control, with the ABS, ESC, adaptive cruise and forward collision warning lights on at start-up; the fix is an ABS module software update. source ↗
- 2005-2020 Chrysler 300 (LX/LD): 'The ABS pump and module fitted to Dodge Chargers produced between 2006-2007 suffers from malfunction due to a breakdown of the internal components', storing C2200 (module internal failure) and C2116 (pump motor supply low voltage).
Is C2116 the ABS module?
C2116 is listed for 11 vehicle lines from Jeep, Dodge, Ram and Chrysler; the meanings above fall under the “Pump motor, motor relay or relay circuit” family of codes.
This family of codes concerns the pump motor that builds pressure inside the ABS unit, the relay or driver that switches it, and the circuit between them. The module runs the pump for a moment at start-up and watches for current and for the motor’s feedback; no current, too much current, or a motor that does not stop sets a code here. On some units the pump or valve relay is a separate plug-in part you can swap; on others the relay function is a solid-state driver inside the module, so a “relay” code is really a module code there.
Is the module the likely cause? Often
For this family of codes the module is a likely cause, but not the only one. The relay or driver that feeds the pump sits inside the module on many units, and its solder joints and driver transistors carry the pump’s full current — a pump that runs constantly with the key off, or a relay code that returns as soon as it is cleared, points there. A seized or worn pump motor, a blown pump fuse and a corroded power or ground feed can set the same code from outside the module, so those are checked first.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- With the module connector unplugged, look for heat-darkened or loose pins on the heavy pump-motor terminals — the pump draws a lot of current, and a tired pin or fuse holder drops voltage under that load.
- Listen: a pump that runs with the key off, or hums constantly, is a relay or driver stuck on — pull the pump fuse or disconnect the battery so it does not drain the battery or burn the motor out.
- If the unit has a plug-in pump or valve relay, swap it with an identical relay and see whether the code stays.
- With a scan tool, command the pump on (where the tool allows it) and listen and feel for it running; no response with good power and ground points at the module or the motor.
- If the fuse, power, ground and connector are good and the code returns, stop there — the rest is inside the unit and is bench work.
What the lab does for a code in this family
At the bench we load the module’s pump-motor driver the way the motor does, repair the driver circuit, its solder joints and the board-to-motor connections, and test a driver that will not switch off. We repair the electronics only: a pump motor that is worn or seized, or the hydraulic block, is not something we repair, and we tell you when the bench points there.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Unit identified on the bench (any make)4 vehicle lines on this pageRepair from $499 · refurbished unit with your data from $950
- ATE / Continental MK60 / MK613 vehicle lines on this pageRepair from $499 · refurbished unit with your data from $950
- ATE / Continental MK251 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Bosch ABS / ESP 81 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Continental MK701 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- TRW EBC 345 / 440 / 4501 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to C2116.
- C220011 shared vehicle linesControl module internal fault
- U012110 shared vehicle linesCommunication — no response from the ABS module
- C2200-4910 shared vehicle linesControl module internal fault
- C21005 shared vehicle linesSupply voltage to the module
- C21015 shared vehicle linesSupply voltage to the module
- C21123 shared vehicle linesPump motor, motor relay or relay circuit
- C100A1 shared vehicle lineWheel-speed sensor circuit
- C10201 shared vehicle lineWheel-speed sensor circuit
C2116 — questions
What does C2116 mean on a Jeep?
On the Jeep lines in our data, C2116 is listed as: ABS Pump Motor Supply Low Voltage. In general terms it belongs to the “Pump motor, motor relay or relay circuit” family — the ABS pump motor, the relay that feeds it, or a pump that runs when it should not. Dodge, Ram and Chrysler list the same number with their own wording — see the meaning-by-vehicle table.
Can I drive with C2116?
A pump fault switches ABS and stability control off while the base brakes keep working; a pump that runs constantly can drain the battery overnight and overheat the motor, so pull its fuse or disconnect the battery until it is looked at. On a hybrid or electro-hydraulic brake unit the pump is the brake booster — treat a pump code there as a do-not-drive until it is checked. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is C2116 the ABS module or a sensor?
For this family of codes the module is a likely cause, but not the only one. The relay or driver that feeds the pump sits inside the module on many units, and its solder joints and driver transistors carry the pump’s full current — a pump that runs constantly with the key off, or a relay code that returns as soon as it is cleared, points there. A seized or worn pump motor, a blown pump fuse and a corroded power or ground feed can set the same code from outside the module, so those are checked first.
How much does it cost to fix C2116?
Repair of your own module starts at $499 for the vehicles that set C2116; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will C2116 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Which vehicles set C2116?
In our data C2116 is listed for 11 vehicle lines from Jeep, Dodge, Ram and Chrysler: 2005-2020 Chrysler 300 (LX/LD), 2008-2020 Dodge Grand Caravan (RT), 2009-2020 Dodge Journey (JC), 2007-2017 Jeep Compass (MK49) and 7 more. The same number can mean something different on each make, so the table above gives the meaning per vehicle.
Still not sure?
Send us C2116, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
C2116 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com