ABS Module Lab

Jeep Grand Cherokee ABS Module Failure: WJ, WK and WK2 Repair

ABS Module Lab Team · · 17 min read

Which ABS unit your 1999–2021 Jeep Grand Cherokee has (Teves Mark 20e, MK25e or ZF), what C2200, U0121 and code 32 mean, and repair from $499.

A dark mid-size SUV parked on a gravel forest trail at sunset with its hood and rear hatch open, one person sitting in the driver's doorway and a technician crouched beside it.

Which ABS module a Jeep Grand Cherokee carries depends on its generation: the 1999–2004 WJ has a Continental Teves Mark 20e with its controller attached to the hydraulic unit, the 2005–2010 WK a Continental Teves MK25e, and the 2011–2021 WK2 a unit listed as ZF. Whichever you have, a bench repair of your own module costs from $499 plus the return label, and a refurbished unit loaded with your Jeep's data costs from $950. Settle the generation and the label number first, then read the codes, because code 32 on a WJ points at the rear speed sensor circuit while C2200 on a WK or WK2 is the module reporting a fault inside itself.

Which Grand Cherokee generations use which ABS unit

Three generations, three different units, and not one part number on file is shared between two of them.

Generation Model years ABS unit on file What the lab sells
WJ 1999–2004 Continental Teves Mark 20e; the controller (CAB) is attached to the hydraulic control unit under the hood MK20 repair, in the ATE / Continental MK20 family
WK, SRT8 included 2005–2010 Continental Teves MK25e, with the electronic stability program MK25 repair, in the ATE / Continental MK25 family
WK2, SRT, SRT8 and Trackhawk included 2011–2021 ZF, with stability control Any-make ABS module repair; no catalog unit family

WJ, 1999–2004

The WJ's Teves Mark 20e puts its controller, called the CAB (Controller Antilock Brakes), directly on the hydraulic control unit under the hood, and the lab prices it in the MK20 family. The dated Mopar numbers for the WJ fall into three groups, 1999–2001, 2002–2003 and 2004, each listed for the 4.0L and 4.7L engines.

WK, 2005–2010

The WK uses the Continental Teves MK25e, a next-generation Teves anti-lock system, and it has the electronic stability program, so one module runs anti-lock braking, traction control and ESP; the SRT8 belongs to the same line. For 2005 Mopar lists separate numbers for 2WD and 4WD Jeeps, from 2006 the numbers include the SRT8, and the 2007 number adds the 3.0L diesel. Nothing on file is specific to 2008, so on a 2008 the label is the guide.

WK2, 2011–2021

The unit on file for the WK2 line, SRT, SRT8 and Trackhawk included, is ZF, the supplier an NHTSA recall report names for 2018–2019 models. No unit family on this site matches it, so a WK2 is ordered as the any-make repair for the same $499 and the label tells the bench what arrived; the same module runs stability control, anti-lock braking and traction control.

The WK2 also shares part numbers with the Durango of the same years: 23 of the 31 WK2 numbers on file also appear on the 2011–2020 Dodge Durango (WD) line, and the Durango and Aspen guide covers that SUV.

2018–2019 Grand Cherokee (WK2): check two recalls first

Two safety recalls name ABS parts for the 2018–2019 Grand Cherokee (WK2). ABS module 68442477AC is part of recall 22V-426 on Jeeps built from June 10, 2018 through April 30, 2019. Hydraulic control unit / ABS modules 68336274AB and 68408605AB are part of recall 24V-838, whose report says some 2018–2019 units of that kind falsely read pressure in the primary brake circuit, which can keep the brake lights on and switch off ABS and ESC with the ABS, ESC and red brake lamps lit at start-up. Before paying for any repair on a 2018 or 2019, enter the VIN at nhtsa.gov/recalls, because an open recall is fixed by the dealer at no cost. The recall records list this Jeep as the WK; by its years it is the WK2 line described here.

Symptoms of a failing ABS module on the Grand Cherokee

A WJ announces an anti-lock fault with the amber ABS lamp. An owner-forum how-to on the 1999–2004 Grand Cherokee calls the control module a frequent problem on these Jeeps, but it puts three cheaper causes ahead of it, and they lead the checklist below.

On a WK or WK2 the ABS, traction and stability lamps light together, because one module carries all three systems. The WK failures on file run from the module's internal fault and lost communication to low supply voltage, faults in the pump motor's power supply, the pump motor itself and pressure-sensor faults, so the code, not the lamp, says which one you have. The brakes still stop the Jeep; what goes is the anti-lock release and the traction and stability help, which a heavy SUV misses most in rain, snow and gravel.

Electronic faults in these modules can come and go with heat and bumps: the lamps come on once the engine bay is hot or after a jolt and clear after a restart. A wheel-speed sensor problem instead sets a code that keeps naming the same wheel. A pump that keeps running with the Jeep parked and the pedal released points to a pump driver stuck on inside the module; pull the pump fuse so it cannot drain the battery.

The fault codes you will see

Code readers that only talk to the engine computer show nothing from the ABS module, so use a tool that opens the ABS module by name. The WK and WK2 share their C2200 group of codes with the Wrangler JK, which has its own guide; these are the codes on file for the Grand Cherokee.

Code Meaning Generations on file What it points to
32 Rear speed sensor circuit WJ The rear speed sensor or its wiring, checked before the module
C2200 ABS control module internal fault WK, WK2 Electronics inside the module
C2200-49 Anti-lock brake module internal fault WK, WK2 The same internal fault as C2200, listed with a -49 suffix
C2116 ABS pump motor supply low voltage; on the WK2 also listed as pump motor fault WK, WK2 The module's pump feed, the motor, or the supply and ground
U0121 Lost communication with the ABS module WK, WK2 Set by other modules when the ABS module stops answering
U0415 Invalid data from the ABS module WK2 Another module rejecting what the ABS module reports
C2100 Battery voltage low WK2 The battery, the charging system or the module's feed
C2101 Battery voltage high WK2 The charging system pushing the supply too high

No communication at all is its own case. A module that will not answer has lost its supply, its ground or its network wiring, or its communication circuit has failed, and only the outside causes are cheap. Prove it is powered first: check the ABS fuses, measure battery voltage at its feed pins with the ignition on, confirm its ground and inspect the connector. Other modules holding U0121 while answering the tool show the network is up and only the ABS module is missing; a powered, grounded module that stays silent goes to the bench.

Why these modules fail

On the WJ, the CAB sits on the hydraulic unit in the engine bay, where heat and vibration reach it directly. Nothing on file says which part inside it gives out, and the bench finds that module by module.

On the WK, the failures on file line up with the codes. An internal fault (C2200) is the module's own self-test reporting a fault inside it. What that code means on the WK2 and every other line that stores it, and what the bench replaces, is set out in the C2200 guide. Low-voltage and pump power-supply faults (C2116) involve the stage that feeds the pump motor, or the supply reaching the module, while a pump-motor fault can be the motor itself, which is part of the hydraulic unit. Lost communication (U0121) is the network side gone silent, and a pressure-sensor fault involves the sensor the stability program relies on to read brake pressure.

On the WK2, nothing on file describes a failure beyond its codes and the 24V-838 recall. U0415 adds the case where the module still talks but sends data another module rejects, which can be the module or a sensor feeding it, and C2100 and C2101 are the module watching its own supply voltage.

Plenty of what lights the lamp sits outside the module: wheel-speed sensors and tone rings (the WJ's code 32 and its brake-dust problem), the harness at the pump and the wheels, the pump fuse, the battery and alternator, a seized pump motor and a valve block that leaks inside. How the Mark 20 and MK25 relate to the other Continental units is covered in ATE / Continental ABS units explained, and the MK25 family page lists what the bench tests on the WK's unit.

Check these before you condemn the module

On a WJ

The forum how-to lists three causes to rule out before the controller, and each costs less than a module:

  1. The ABS pump fuse. A blown fuse stops the pump and lights the lamp. Test it in place with a test light, and if it has blown, find the short before fitting another.
  2. Wiring at the pump and at the wheel sensors. Look for chafed insulation, broken strands at the plugs and corroded pins, above all where the harness flexes with the suspension.
  3. Brake dust on the wheel sensors. A sensor caked in dust can lose its signal: pull it, clean its tip and the tone ring, and refit it. Code 32 sends you to the rear first.

On a WK or WK2

  1. Battery and charging. Load-test the battery and read the charging voltage with lights and blower on; a failing battery or charging fault can set C2100 or C2101 on the WK2.
  2. Grounds. Clean the battery terminals and the engine and body straps, then check the module's ground circuit for voltage drop while the pump is commanded on.
  3. The connector. With the battery off, unplug the module, look for corrosion or moisture in the cavities, clean and reseat it, then clear the codes and drive.
  4. Live wheel speeds. Watch all four channels side by side on a slow drive; a channel that drops out or wanders points to its own wheel.
  5. The network. Note which modules hold U0121 or U0415, and record every code with its freeze-frame data before you clear anything.

A changed pedal, a falling fluid level or a code naming a hydraulic circuit means a shop should take over, as does any job you cannot lift and support safely at home. The lab's work is the module; the Jeep around it is a mechanic's.

Repair, refurbished, used or new: what each really costs

Route Price from Fits when After install
Repair of your own module $499, all three generations The fault is electronic: C2200, C2200-49, C2116 traced to the module, or no communication with power present Clear codes and road-test; your coding returns inside the module
Refurbished unit with your data $950 Your module is past repair; a reconditioned unit of the same type receives your VIN, coding and configuration Same as a repair
Used module Not quoted A module from another Grand Cherokee, coded to that Jeep, with no record of how it was treated Coding to your VIN, and an unknown history
New dealer module No price on file for any generation You want new hardware for the current number Check with the installer whether it has to be programmed to your VIN, and the charge for that

Every figure here is a starting price, and work the bench finds beyond the service you bought is priced and approved by you before it is done. Return shipping is your pick at checkout and is added to the bill: the standard service costs $29.95 and takes 3–5 business days, two-day UPS costs $54.95, and next-day UPS costs $94.95. The label that brings the module to Arlington is on us, and it becomes UPS 2nd Day Air for +$55. On the bench a module takes about a week, and rush repair at +$100 cuts that to 2–3 business days.

The included warranty is 1 year on every repair and every refurbished unit, counted from the day the module ships back, and no other warranty is sold; the warranty page has the details. Order by generation from the table at the top, or let us check the number first: a label photo sent through request a quote is enough.

A module the bench cannot save is set aside until you decide: a refurbished unit, paying the gap between its price and what you already paid, or your own module back with the repair price refunded less shipping and a $150 bench evaluation fee. Your data is copied out of your original, so it has to reach the lab before a refurbished unit can be made, and it then stays here as the core, with no core charge.

Removing and shipping the module

Both Teves generations, the WJ's Mark 20e and the WK's MK25e, carry the controller on the hydraulic unit, and on many units it unbolts so the brake lines stay connected. The WK2's ZF unit has no family rule on this site: photograph it and send the photo through the quote form before you remove anything, and we confirm whether the control module comes off alone.

  1. Place the order so the RMA and the prepaid label are in your inbox before the Jeep is opened up.
  2. Take the negative cable off the battery, wait several minutes, and keep the ignition off while the connector is unplugged.
  3. Clean the area around the unit; dirt that gets between the module and the hydraulic block ends up in the valves.
  4. Unlatch the connector, draw it straight off and check its pins and seal.
  5. Undo the module's fasteners and ease it off the hydraulic block without twisting it or levering on the valve stems.
  6. If it does not separate, the hydraulic unit comes out with it: plug every port and line end the moment it opens, and tell us when you order that the whole unit is coming.
  7. Photograph the label, then bag the module, shield the connector, pack it with thick padding on every side, write the RMA on the box and inside it, and apply the prepaid label.

Without its controller a Grand Cherokee keeps ordinary pedal braking, yet anti-lock, traction and stability help are gone and the lamps stay on. Any opened line keeps the Jeep off the road until a full bleed restores a firm pedal. The mail-in instructions show the packing step by step.

What happens at the bench

The box is opened against your RMA, the label is photographed and the number is checked against the generation you ordered for. On a bench supply the module's stored data and fault history are read, then its pump-motor and valve outputs are loaded the way the Jeep loads them, so an intermittent C2200 or C2116 has a chance to show itself. The repair is made on the module you sent, so its stored coding goes back in with it, and a full retest comes before it ships with tracking. If it cannot be repaired you are asked before anything else happens; How It Works describes each stage.

After it is back in the car

Bolt the module back onto the hydraulic unit with the battery disconnected, tightening its fasteners evenly, and push the connector on until it latches. With the battery reconnected, clear the codes in every module that stored one, including U0121 and U0415 in the others, and test the pedal before the Jeep moves. Then drive slowly so the module can run its checks; the lamps should go out.

A hydraulic unit that came out whole means opened lines and a full bleed by the maker's procedure. Across the three generations, some vehicles still need a brake bleed, initialization or calibration after install. Read the code before clearing it if a lamp ever returns, and send it to us with your RMA number.

Part numbers for the Grand Cherokee

Thirty-one WK2, eleven WK and seven WJ numbers are on file, each one in the part-number lookup, which returns the generation, the family and the price. Because no number is shared between generations, the label number alone tells you which generation a module belongs to.

Part number Generation Catalog note
5011259AA WJ "Anti-Lock Brake System Modulator", 1999–2001, 4.0L and 4.7L
5066653AA WJ ABS module, 2002–2003, 4.0L and 4.7L
5066657AB WJ "Anti-Lock Brake Control Unit", 2004, 4.0L and 4.7L
5134962AA WK "Control Unit Anti-Lock Brake; Modulator Valve", 2005 Laredo and Limited 4WD
5140724AA WK ABS control module, 2005 Laredo and Limited 2WD
68004830AD WK Current supersession for 2006–2007; replaces 5179776AA and 68004830AA
68046388AA WK "Anti-Lock Brake Control Unit", 2009–2010; the same number is listed for the 2009 Wrangler
68065989AA WK ABS module, 2010, SRT8 included, 3.7L, 5.7L and 6.1L
68085397AB WK2 "Anti-Lock Brake Control", listed for 2011–2014 and 2016–2022
68139770AB WK2 Supersedes 68139770AA and 68085398AE
68262200AB WK2 "Hydraulic-Anti-Lock Brake System", 2015–2022
68442478AA WK2 ABS module, 2019–2020, 3.0L diesel, 3.6L and 5.7L

A label may print an older suffix than the number a dealer sells today, and the lookup recognizes both; for a number not on file, a label photo through the quote form gets the unit identified.

FAQ

How much does Jeep Grand Cherokee ABS module repair cost?

Repairing the ABS module from a WJ, WK or WK2 Grand Cherokee starts at $499, with the return label from $29.95 on top, and the bench time is about a week. A refurbished unit loaded with your Grand Cherokee's VIN, coding and configuration starts at $950, and no new-module price for any of the three generations is on file.

What does C2200 mean on a Jeep Grand Cherokee?

On a WK or WK2 Grand Cherokee, C2200 means the ABS control module has found a fault inside itself, and C2200-49, listed with the same meaning, is the same fault. The module is the part to repair once the battery, fuses, grounds and connector have been ruled out.

What does ABS code 32 mean on a 1999–2004 Grand Cherokee?

Code 32 on a WJ Grand Cherokee points to the rear speed sensor circuit, so the sensor and its wiring come before the module. Check the rear sensor's wiring and plug, and clean brake dust off the sensor, before suspecting the controller.

Is there a recall on the Grand Cherokee ABS module?

Two safety recalls, 22V-426 and 24V-838, name ABS module and hydraulic control unit numbers for some 2018–2019 Grand Cherokee (WK2) models. Enter the VIN at nhtsa.gov/recalls before paying for a repair, because an open recall is remedied by the dealer at no charge. No ABS recall is on file for the WJ or the WK.

Does a repaired Grand Cherokee ABS module need programming?

A repaired WJ, WK or WK2 module is the one you sent, so the coding it stored comes back with it, and installation follows Jeep's procedure for your generation. A refurbished unit is written with your data before it ships. If you buy a new module from a dealer instead, ask the installer about programming and its price first.

Can I drive a Grand Cherokee with the ABS and ESP lights on?

A Grand Cherokee with the ABS and ESP lamps lit still brakes normally, but it has no anti-lock release, traction control or stability control until the module is fixed. Drive it gently, allow extra stopping distance in rain and snow, and avoid towing. If the pedal feels different or the red brake lamp comes on, park it and have the brakes inspected.

What happens if my Grand Cherokee ABS module cannot be repaired?

If the bench finds a Grand Cherokee module past repair, you are told before any more work is done. You can then take a refurbished unit carrying your data, paying the difference from what you already paid, or have your module returned with the repair price refunded less shipping and a $150 bench evaluation fee.

What warranty comes with a Grand Cherokee ABS module repair?

One year, included: every Grand Cherokee module repair and every refurbished unit is covered for 1 year from the day it is shipped back to you. No other warranty is offered or sold.

Sources