ABS Module Lab

C2200 Code: ABS Module Internal Failure on Jeep, Ram, Dodge, Chrysler

ABS Module Lab Team · · 21 min read

What C2200 and C2200-49 mean on Jeep, Ram, Dodge and Chrysler ABS modules, the checks to run first, what the bench replaces, and repair from $499.

A technician's gloved hand holding fine tweezers over the green circuit board of an opened automotive control module, its square microcontroller chip in focus under a magnifying lamp.

On a Chrysler, Dodge, Jeep or Ram, C2200 (also listed as C2200-49) is the ABS module reporting that its own electronics failed a self-check; a module repair here starts at $499 ($325 on the Kelsey-Hayes EBC325 lines) and a refurbished unit with your data at $950, both starting prices. It is the code we see on more ABS modules than any other, and on the modules that reach our bench with it, the internal microcontroller (MCU) has to be replaced. Prove the battery, charging voltage, ABS fuses, ground and connector before paying for anything.

The short answer

C2200 and C2200-49 describe one fault, an internal failure of the anti-lock brake module's own electronics; the Charger record words C2200-49 as an internal electronic error. A weak battery, a charging fault, a blown ABS fuse, a poor ground or a corroded connector can make a sound module set codes, so test those first; a C2200 that returns as active after clearing, with all of them good, means the module has failed. On the C2200 modules we receive, the microcontroller inside the module has to be replaced, bench work we do at component level on the customer's own board. With C2200 stored the base brakes still work, but anti-lock braking and any traction and stability control stay off until the module is fixed. Our module repair starts at $499, or $325 on the Kelsey-Hayes EBC325 Ram lines, a refurbished unit carrying your VIN, coding and configuration starts at $950, and seven new Mopar parts on file carry catalog prices under $950.

What C2200 and C2200-49 mean

C2200 is a verdict the ABS module reaches about itself. The published Jeep definition says the module monitors its internal microprocessors and sets C2200 on an internal fault, and the records for most other lines give the same meaning in fewer words: an anti-lock brake module internal fault or failure.

C2200-49 adds a two-digit suffix to the base code, and the records read it as the same fault: most lines list it as an anti-lock brake module internal fault, three Ram truck lines as the internal failure code, and the Charger record as the module detecting an internal electronic error. Treat C2200 and C2200-49 as one code; the C2200 and C2200-49 code pages show every meaning on file, vehicle by vehicle.

Many scan tools also print a status beside each code. Active, current or present means the module is failing its check right now; stored, history or inactive means it failed at some point since the codes were last cleared and has not failed again.

Once C2200 is set, the module shuts off anti-lock braking, plus traction and stability control on the lines that have them, and leaves the warning lamps on; the base hydraulic brakes keep working. One owner report on file is the reason to take the code seriously all the same: a 2011 Grand Caravan at about 170,000 miles whose failing module was intermittently applying the brakes during city driving.

Vehicles that set C2200

C2200 or C2200-49 is on file for the fifteen lines below, built around Continental, TRW, Bosch, ZF and Kelsey-Hayes hardware. The code is the same whoever built the module, so the unit decides the price, what you ship and whether a new part is on file, and the label number, typed into the part-number lookup, names the unit.

Line Years Unit or family on file Other codes on file Repair from
Jeep Wrangler and Wrangler Unlimited (JK) 2007–2018 Continental (ATE) MK61 C2200-49, C2116, U0121, C2100, C2101, C100A, C1020 $499, MK60 / MK61 family
Jeep Compass and Patriot 2007–2017 Listed under the MK60 / MK61 family C2200-49, C2116, U0121 $499, MK60 / MK61 family
Jeep Liberty (KJ) 2002–2007 Listed under the Continental MK70 family C2200-49, C2116, U0121 $499, MK70 family
Jeep Liberty (KK) 2008–2012 Bosch 8.0 control module C2116 $499, Bosch 8 family
Jeep Grand Cherokee and SRT8 (WK) 2005–2010 Continental Teves MK25e C2200-49, C2116, U0121 $499, MK25 family
Jeep Grand Cherokee, SRT and Trackhawk (WK2) 2011–2021 ZF C2200-49, C2116, U0121, U0415, C2100, C2101 $499, any-make repair
Dodge Journey (JC) 2009–2020 Continental (ATE) MK61 C2200-49, C2116, U0121, C2100, C2101, C2112 $499, MK60 / MK61 family
Dodge Grand Caravan and Chrysler Town & Country (RT) 2008–2020 No unit named; the label decides C2200-49, C2116, C2216, U0121, C2100, C2101, C2112 $499, any-make repair
Chrysler 300, Dodge Charger, Challenger and Magnum 2005–2020 No unit named; the label decides C2200-49, C2116, U0121, C2100, C2101, C2112 $499, any-make repair
Dodge Ram 1500 (DR), SRT-10 included 2002–2008 Kelsey-Hayes through 2005, TRW from 2006 C2200-49 with 65, 66, 67, 68 and C0265 $325, Kelsey-Hayes EBC325
Dodge Ram 2500 and 3500 2003–2009 Kelsey-Hayes through 2005, TRW from 2006 65, 66, 67, 68, C0265 $325, Kelsey-Hayes EBC325
Ram 1500 (DS) and 1500 Classic 2009–2018 TRW; EBC-440, with 2013–2018 not confirmed by a source C2200-49, C2116, U0121 $499, TRW EBC family
Ram 1500 (DT) 2019–2020 Continental C2200-49, C2116, U0121 $499, any-make repair
Ram 2500 and 3500 2010–2018 TRW EBC-440 C2200-49 $499, TRW EBC family
Hyundai Genesis, Genesis Coupe and Equus 2009–2016 MK61 module U0121 $499, MK60 / MK61 family

Jeep

The Wrangler JK's C2200 is the one with the published definition described above, and the JK also logs two wheel-speed codes, C100A and C1020, that point first to a sensor, tone ring or wire at one wheel. The Wrangler JK guide covers that Jeep in full, and the Compass and Patriot guide matches that line's module numbers to their model years.

Dodge and Chrysler

Mopar catalogs the ABS module separately from the hydraulic control unit for most years of the Chrysler 300, Charger, Challenger and Magnum. On 2006–2007 Chargers the ABS pump and module can malfunction from a breakdown of internal components, storing C2200 with C2116, so a Charger with both codes needs its pump tested as well as its module. Separate guides go deeper on the Journey, the Grand Caravan and Town & Country and the 300, Charger and Challenger.

Ram

The 2002–2008 Ram 1500 (DR) and the 2003–2009 Ram 2500 and 3500 changed from Kelsey-Hayes modules to TRW for 2006, so the label decides which you have, and both lines are priced as Kelsey-Hayes EBC325 units. The DR's 2006-and-later TRW modules are listed with lost communication, a pump stuck on and operation that comes and goes. The Ram 1500 guide and the Ram 2500 and 3500 guide take the TRW trucks one by one.

The 2019–2020 Ram 1500 (DT) uses a Continental unit, and recall 24V-653 on file covers an ABS module software condition that can switch off electronic stability control, with the ABS, ESC, adaptive cruise and forward collision warnings lit at start-up; the remedy is a module software update. A DT showing those lamps should have its VIN checked for that recall before anything else.

Hyundai Genesis and Equus

Outside the Chrysler group, the one line on file that lists C2200 or C2200-49 is Hyundai's: the 2009–2014 Genesis sedan, the 2010–2016 Genesis Coupe and the 2011–2013 Equus, on an MK61 module, where the record gives C2200 as an internal fault that cannot be cleared and lists U0121 beside it. Other makes report a failed module under their own codes, collected in ABS module internal-failure codes by make.

Codes that come with C2200

What sits next to C2200 changes what you check and sometimes what you send.

Companion code Meaning on file Lines What it changes
U0121 Lost communication with the ABS module Every line in the table except the Liberty KK, the Ram 1500 (DR) and both Ram 2500 and 3500 generations The module has also gone silent at least once; prove its fuses, feed and ground
U0415 Invalid data from the ABS module Grand Cherokee WK2 Another module rejects the data the ABS module sends
C2116 ABS pump motor supply low voltage; pump motor fault on the WK2, DS and DT Every Jeep line, the Journey, Grand Caravan and 300 group, and the Ram 1500 DS and DT Test the pump fuse, feed and ground, then the pump motor itself
C2216 ABS pump motor supply low voltage Grand Caravan and Town & Country Read it like C2116
C2100 Battery (supply) voltage low Wrangler JK, WK2, Journey, Grand Caravan, 300 group Fix the battery or charging fault, then retest C2200
C2101 Battery voltage high The same lines Overcharging; fix it, then retest
C2112 Sensor supply 1 voltage circuit high Journey, Grand Caravan, 300 group The module's sensor feed reads high: check the sensors and harness on it for a short, then the module
C100A, C1020 Wheel speed sensor fault Wrangler JK A sensor, tone ring or wire at one wheel
65, 66, 67, 68, C0265 Internal main relay (65, 66), pump motor fault (67, 68); C0265 recorded with a pump that keeps running Kelsey-Hayes Rams The older trucks' own numbering for module and pump faults

C2200 with U0121 means the module failed its own check and, at least once, stopped answering the rest of the vehicle. A module that briefly loses its feed or ground does the same, so when the scan tool cannot open the ABS module at all, check its fuses, battery voltage at its power pins with the ignition on, its ground and the connector before ordering anything.

C2200 with C2116 or C2216 adds low voltage at the pump-motor supply. Once the pump fuse, feed and ground are good, both the module's pump stage and the motor need testing; the motor belongs to the hydraulic unit, and a worn or seized motor is not something a module repair fixes.

C2200 with C2100 or C2101 puts the supply voltage in doubt. Repair the battery or charging fault, clear the codes and drive: a C2200 that stays away was the voltage, and one that returns is the module.

C2200 with C2112 reports the module's own sensor feed sitting high. A shorted sensor or a harness worn through to a live wire can drag it up from outside the module, so inspect the sensors and wiring on that feed before anything is boxed.

Check these before you condemn the module

  1. Recalls. Enter the VIN at nhtsa.gov/recalls. On a 2019–2020 Ram 1500 (DT), recall 24V-653 is fixed at the dealer with a module software update, and the two ABS recalls on file for the 2018–2019 Grand Cherokee (WK2) are listed in the Grand Cherokee guide.
  2. The battery. Charge it fully and load-test it. A battery that sags while cranking can leave a stored C2200 that is not a module fault.
  3. Charging voltage. Read it at the battery with the engine running and the headlights and blower on; a reading too low or too high explains C2100 or C2101.
  4. The ABS fuses. With the key on, test the module feed and pump fuses on both sides with a test light.
  5. The grounds. Scrape the battery posts and every ground strap you can reach clean, then have the scan tool run the pump while a meter checks for voltage drop across the module's ground circuit.
  6. The connector. With the battery disconnected, unplug the module, look for water, green corrosion and pins pushed back in their cavities, then clean and reseat it.
  7. Clear, restart, drive, read again. Write down every code with its status and freeze-frame data, clear them, restart, drive at road speed and read the ABS module again. C2200 back as active, with checks 2 to 6 passed, is the module.
  8. Brake behavior. If the brakes apply on their own, the pedal has changed or the red brake lamp is lit, the vehicle needs a mechanic before it goes back on the road.

A shop handles the vehicle around the module; we handle the module.

What the bench does with a C2200 module

At check-in the box is matched to your RMA, the label is photographed and the part numbers are read. Next the module is powered up on the bench: its fault memory and stored data come off first, then its pump-motor and valve drivers work against a real load, so the bench sees the fault the vehicle reported before any part is touched.

On the C2200 modules we receive, the repair is the replacement of the internal MCU, the module's microcontroller, done at component level on your own board. After the replacement the module goes through the full bench test again, then is packed and shipped at the speed you chose, with the tracking number by email.

A second fault beyond the service you ordered is priced for you before any work, and a module past repair waits for your decision; How It Works follows a module from the order to its return.

Repair, refurbished, used or new: what each really costs

Option for a C2200 module Price What you get What comes after
Repair of your module From $499; from $325 on the Kelsey-Hayes EBC325 Ram lines Your own module, repaired at component level and retested, with the 1-year warranty Refit and clear codes, then the install steps below
Refurbished unit with your data From $950 A tested replacement of your unit type, written with the VIN, coding and configuration read from your original; the original stays with us as the core, with no separate core charge Refit and clear codes, then the install steps below
Secondhand module Not quoted Another vehicle's module, coded to that vehicle and possibly carrying the same fault It may need the maker's tool to match your VIN
New Mopar module The catalog prices below, where one is on file New hardware for that number Ask your installer about programming, and its cost, before you order

New Mopar parts on file below $950

Vehicle Part number Catalog description Price on file
2005 Ram 1500 (DR), 3.7L and 4.7L 5134733AB "Module-Anti-Lock Brakes; Control Module" $339.18
2009 Dodge Journey, 2.4L, 2.7L and 3.5L 68038226AA "Anti-Lock Brake System Module" $392.16
2009–2010 Chrysler 300 and Charger, 2008–2010 Challenger 68048305AC "Module-Anti-Lock Brake System; Control Module" $465.12
2010 Jeep Wrangler (JK), 3.8L 68067458AA "Module-Anti-Lock Brake System; Control Module" $471.96
2008 Jeep Wrangler (JK), 3.8L 68030936AB "Module-Anti-Lock Brake System; Control Module, Hydraulic Unit" $533.50
2008–2009 Jeep Compass and Patriot 68038073AA "Hydraulic Control Unit Anti-Lock Brake System; ABS Control Unit, Modulator Valve" $721.43
2008 and 2010 Grand Caravan and Town & Country, 3.3L to 4.0L 68030938AA "ABS Control Module" $751.30

Every one of those parts costs less than a refurbished unit, so when your module is past repair and your number is on the list, new is the cheaper replacement on parts price; ask the installer whether it needs programming and what that and the labor add. Three of them, the parts for the Journey, the 300 group and the 2010 Wrangler, sit below their lines' $499 repair starting price; if the part is still sold for your exact number and the installer's charges are small, new can beat a repair on cost too. The 2008–2009 Compass and Patriot part is cataloged as a hydraulic control unit with the ABS control unit and modulator valve, the better buy when the pump or valve block has failed, which a module repair does not fix, and the 2005 Ram 1500 module costs more than that line's $325 repair. Catalog prices are what the catalog showed on the day it was read, not quotes, and where no price is on file, a dealer quote for your number is the comparison.

What else to budget

Both repair figures, $499 and $325, are starting prices: if the bench finds work outside the service you ordered, you are told what it costs and nothing is done until you approve it.

Shipping or speed Price
Return, standard service, 3–5 business days $29.95
Return, UPS 2nd Day Air $54.95
Return, UPS Next Day Air $94.95
Inbound label, from ground to UPS 2nd Day Air +$55
Rush repair: the bench takes 2–3 business days, against about a week as standard +$100

Every repair and every refurbished unit carries the 1-year warranty from the day it ships back; it is included, and it is the only warranty we offer, as the warranty page explains.

A module the bench cannot repair is not worked on further until you choose. One choice is a refurbished unit carrying your data, for only the difference over what you have paid; the other returns your own module and refunds the repair price, minus the shipping. The refurbished route needs your original first, since your data is read out of it, so no unit ships ahead of it.

To book it, choose the any-make repair if your unit has no family page, or your unit's family on the pricing page; if you would rather have the number and codes looked at first, a label photo through request a quote does that.

Removing and shipping the module

Unit on your label What goes in the box Lines on file
TRW EBC or Kelsey-Hayes EBC325 The control module alone; it comes off the valve body by itself Ram 1500 DR and DS, Ram 2500 and 3500 of both generations
Continental MK61 or another MK60 / MK61 unit, MK25e, Bosch 8.0 The control unit, which unbolts from the valve block on many units Wrangler JK, Compass, Patriot, Journey, Genesis, Equus, Grand Cherokee WK, Liberty KK
The MK70 family unit on the Liberty KJ The module with its pump and motor Liberty KJ
ZF, the DT's Continental unit, or no unit named Send a photo through the quote form first and we confirm Grand Cherokee WK2, Ram 1500 DT, Grand Caravan, Town & Country, 300, Charger, Challenger, Magnum
  1. Pay for the repair before you pick up a wrench; the RMA number and the prepaid label then arrive by email.
  2. Disconnect the negative battery cable and wait a few minutes; the module is never unplugged with the ignition on.
  3. Clean around the unit so grit cannot fall into the valve block when the module lifts away.
  4. Unlatch the connector and pull it straight off, then take out the module's screws and lift the module squarely off the valve body, without prying on the valve stems.
  5. If the hydraulic unit has to come out, cap every line and port as it opens and say on the order that the whole unit is coming.
  6. Photograph the label, bag the module with its connector covered, pad it on every side in a stout box, mark the RMA on the box and on a note inside, and put the prepaid label on.

With the module out, the vehicle stops on its base brakes alone and every related warning stays lit; with a brake line opened, it is not driven at all until the system is bled and the pedal is firm. The mail-in instructions show each packing step.

After it is back in the car

With the battery still off, seat the module, run its screws down evenly and lock the connector; then reconnect the battery and clear the codes in every module, U0121 and U0415 entries included. Check that the pedal is firm before the vehicle moves, then drive until it has reached road speed and read the ABS module again: C2200 should be gone, neither stored nor active, and the lamps out.

On file, a repaired Liberty KK module and a repaired module from a 2010–2018 Ram 2500 or 3500 need no programming. Beyond that, the maker's installation procedure governs the rest: some vehicles still need a brake bleed, initialization or calibration after install. Units that came out with their lines opened need a full bleed by that procedure.

FAQ

What does C2200 mean on a Jeep, Dodge, Chrysler or Ram?

C2200 on a Jeep, Dodge, Chrysler or Ram means the ABS module has detected an internal fault in its own electronics, recorded as an anti-lock brake module internal fault or failure. The module then switches off anti-lock braking, and traction and stability control where fitted, and lights the warning lamps. If C2200 returns after the battery, charging voltage, ABS fuses, ground and connector test good, the module needs repair.

Is C2200-49 the same code as C2200?

Yes. The records on file give C2200-49 the same meaning as C2200, an internal fault or failure of the ABS module, and the Charger record words it as the module detecting an internal electronic error. The checks and the repair are the same for both.

What does C2200 status active mean on a scan tool?

A C2200 shown as active, current or present is failing the module's self-check on this key cycle, not just stored from an earlier event. If C2200 comes back as active after you clear it, restart and drive, with the battery, fuses and ground good, the ABS module has failed. A C2200 that stays stored and never turns active again may have come from a voltage dip, such as a weak battery or a jump start.

Why are C2200 and U0121 stored together?

C2200 comes from the ABS module itself, reporting an internal fault, while U0121 is written by the engine, body and other modules once they can no longer hear the ABS module. Together they fit a module that is failing inside and dropping off the network. Prove the ABS fuses, power feed and ground first, because a module that loses its supply goes quiet as well.

Is it safe to drive with a C2200 code?

With C2200 set, the base brakes still stop the vehicle, but the anti-lock release, and traction and stability control where fitted, are off, so drive gently and leave extra room on wet or loose roads. Stop driving and have the brakes inspected if they apply on their own, the pedal changes or the red brake lamp lights. One 2011 Grand Caravan with C2200 was reported applying the brakes intermittently in city traffic.

What does C2200 mean on a Jeep Wrangler?

On a 2007–2018 Jeep Wrangler JK, C2200 means the Continental MK61 ABS module has set its internal-fault code; the published Jeep definition says the module monitors its internal microprocessors and sets C2200 on an internal fault. The JK can also log C2116, U0121, C2100 and C2101 beside it. New Mopar modules on file for the JK were priced at $471.96 for 2010 (68067458AA) and $533.50 for 2008 (68030936AB), against a repair from $499 and a refurbished unit from $950.

What causes C2200 on a Ram 1500?

C2200 on a Ram 1500 is the ABS module's own internal fault: the TRW module on a 2009–2018 DS, a Continental unit on a 2019–2020 DT. On a DT, check recall 24V-653 first, since a module software condition under that recall can switch off stability control and light the ABS and ESC lamps. On a 2002–2008 DR, C2200-49 is on file for a line that went from Kelsey-Hayes to TRW for 2006, so the label decides which module you have.

Should I repair or buy new for C2200 on a Dodge Journey or Chrysler 300?

New Mopar module 68038226AA for the 2009 Journey was priced at $392.16, and 68048305AC for the 2009–2010 Chrysler 300 and Charger and the 2008–2010 Challenger at $465.12, both under the $499 repair starting price. When your number matches, ask the installer whether the new module needs programming and what that and the fitting cost; if the total stays under $499, new can cost less, and otherwise a repair from $499 or a refurbished unit from $950 is the route.

How much does a C2200 repair cost?

A C2200 module repair here starts at $499, or $325 on the Kelsey-Hayes EBC325 Ram lines, plus return shipping from $29.95. It is a starting price: work beyond the service is priced and approved by you before it is done. A refurbished unit with your data starts at $950, and the 1-year warranty is included with both.

Sources