Chrysler 300, Dodge Charger and Challenger ABS Module Repair Guide
ABS Module Lab Team · · updated · 17 min read
C2200, C2116 and no-communication faults on the 2005–2020 Chrysler 300, Charger and Challenger ABS module: what fails, what each fix costs and how to ship it.

A Chrysler 300, Dodge Charger or Dodge Challenger that lights the ABS, traction and stability warnings and stores C2200 — the anti-lock brake module internal failure code — is pointing at a fault inside the control module rather than anywhere else in the brake system. We repair that module at component level from $499, or supply a refurbished one with your VIN and coding cloned onto it from $950, and because Mopar catalogs the control module separately from the hydraulic unit on most years, it is one of the easier modules to remove and ship. Pull the codes with an ABS-capable scan tool before you order anything, because the C2100-series voltage codes have a different cause and a cheaper fix.
Which Chrysler 300, Charger and Challenger models have this ABS unit
The LX platform arrived with the 2005 Chrysler 300, was joined by the Dodge Charger for 2006 and the Challenger (on the related LA/LC chassis) for 2008, and continued, as the LD-series cars, to the 2020 model year that closes our data. The Dodge Magnum of 2005–2008 shares the platform and the vehicle line, but its part numbers were not verified in the catalog pages we read, so a Magnum owner should send a label photo first. Our page for the whole line is /vehicles/chrysler/lx-ld-la/, and it is listed under Dodge as well.
We keep the three cars together because the Mopar catalog lists the same module numbers across them: 5170344AA is the control module for the 2005–2006 300 RWD and the 2006 Charger RWD, 68048305AC covers the 2009–2010 300 and Charger with the 2008–2010 Challenger, and 68399772AB and 68399772AC are the 2019 and 2020 modules for all three. Drivetrain and engine still matter: the 2005–2006 cars carry separate RWD and AWD numbers, 2009 has an AWD-specific 68048305AB, and the SRT8 and Hellcat Challengers have their own (68048305AA for 2008, 68444987AA for 2019).
What the catalog does not tell us is who built the unit: no source we hold names the supplier or generation of the LX-family ABS. The numbers printed beside the Mopar number — pairs such as P04779492AE with 25092643823, or P68157545AE with 28526606013 — are in the format Continental (ATE) uses for its supplier numbers, a strong hint but not a source. So the site does not place this line in a named unit family; it is sold at the any-make repair price, the same $499 starting price as the named families on our pricing page, and the bench identifies the unit from its label on arrival.
What the catalog does tell us is how the unit comes apart. For most years Mopar sells the ABS "Module" and the "Hydraulic Control Unit" as separate parts — in 2008, module 68028992AA against HCU 68028990AA — and a control module cataloged on its own is one that unbolts from the hydraulic block, which is what you ship. From 2015 the wording shifts to an "Anti-Lock Brake Control Unit" (68258644AA and 68258639AA, listed through 2023) beside the module numbers, so on a 2015-and-later car photograph the label and let us confirm what to send.
This one module runs anti-lock braking, traction control, stability control and brake assist — a parts-reference page for the 2005–2008 cars treats the ABS, ESP and BAS lamps as one group — and loses them together.
Symptoms of a failing ABS module on the 300, Charger and Challenger
The documented failure on the 2006–2007 Charger is a breakdown of internal components in the ABS pump-and-module assembly that stores C2200 (module internal failure) and C2116 (pump motor supply low voltage), and the same pair of codes appears in a listing for 2009–2010 Chargers. A repair listing for 2010–2014 cars names C2200 as well, and tools that display the failure-type suffix show it as C2200-49, "ABS module has detected an internal electronic error". The dash shows the ABS lamp with the traction and stability lamps, and on the 2005–2008 cars the BAS lamp joins them.
In the early stage the fault is often temperature-dependent — the car starts clean, the lamps come on after a stretch of highway or a hot idle, and after a night in the garage they are off again — which is how an electronic fault behaves and a broken sensor wire does not. The clean starts grow rarer until the lamps are on from the first key cycle and C2200 is a permanent code.
Pump behavior is the other tell. A module that has lost control of its pump driver can leave the pump running with the key on and the brakes untouched, or fail to run it at all, and C2116 sits in the middle of this: low voltage on the pump supply when the module tried to run the pump — the relay inside the module, the pump fuse and wiring, a tired battery, or a motor drawing more than it should. Ordinary braking is not affected by any of this — the hydraulic unit is a pass-through when the module is idle — but the anti-lock intervention in a hard stop and every traction and stability function are gone, and cruise control may refuse to engage.
The fault codes you will see
Our sourced data ties seven codes to this line; read them from the ABS module itself with a tool that supports Chrysler chassis codes, since an engine-only reader shows nothing or just a U-code from another module.
| Code | Meaning | What it points to |
|---|---|---|
| C2200 | Internal failure of the anti-lock brake module | The control module; a self-test inside the unit failed |
| C2200-49 | ABS module has detected an internal electronic error | The same internal failure shown with a failure-type suffix |
| C2116 | ABS pump motor supply low voltage | The pump supply path: the relay or driver inside the module, the pump fuse and wiring, battery condition, or a pump motor drawing too much |
| U0121 | Lost communication with the ABS module | Set in the other controllers when the ABS module drops off the network — the no-communication case |
| C2100 | Battery (supply) voltage low | Battery, charging system or the module's power feed, not the module |
| C2101 | Battery voltage high | An overcharging alternator or regulator, not the module |
| C2112 | Sensor supply 1 voltage circuit high | The module's regulated sensor supply or a short in a sensor circuit it feeds; check the sensor wiring before condemning the module |
Treat C2100 and C2101 as instructions to look at the battery and the charging system first: a module that sees supply voltage outside its window drops its functions and lights the lamps exactly as it would for an internal fault, and the fix is a battery, an alternator or a corroded cable end.
The scan tool that gets no answer from the ABS module is its own case: no response from the anti-lock module, U0121 in the engine and body controllers, and the lamps on because the car has lost the module from the network. It is how a dead module usually arrives at our bench, and also what a blown ABS fuse, a dirty ground or a connector full of water looks like from the driver's seat — the one symptom where the checks further down earn their time.
Why these modules fail
The sourced description is blunt: the pump and module fitted to the 2006–2007 Charger fails through a breakdown of the internal components, storing C2200 and C2116 together. In bench terms, the electronics on the hydraulic block — the pump-motor driver, the solenoid drivers, the voltage regulation and the board's connections to the coil pack — age under heat, vibration and high switching currents until a joint cracks or a component drifts, and the pairing of C2116 with C2200 says the pump supply path inside the module is a frequent casualty.
Keep the module separate from the parts around it:
- Wheel-speed sensors and tone rings feed the module; a sensor code names a wheel, and the fix is at that wheel.
- Wiring and grounds carry the module's power and its network; a corroded ground strap or a chafed harness gives intermittent faults that mimic an internal failure and often set the C2100-series voltage codes.
- The pump motor is a separate unit on the block; worn brushes draw more current and can set C2116 without the module being at fault, which is why the bench runs the pump circuit under load.
- The hydraulic control unit holds the valves; a sticking valve shows up as pedal feel, a dragging wheel or a pull, and is a hydraulic repair.
C2200 on its own, or no communication with good power and ground confirmed at the module connector, points inside the module, and that is where a component-level repair on your own board applies.
Check these before you condemn the module
- Battery and charging. Load-test the battery and read charging voltage; C2100 and C2101 are telling you this is the problem, and a weak battery also produces C2116 during the pump self-test.
- ABS fuses and relay feeds. In the underhood fuse and relay center, test the high-current pump feed and the ignition feed to the ABS module for voltage on both sides with the key on.
- Grounds. Trace the module's ground to its attachment point, clean the metal and the eyelet, and reattach it tight.
- The module connector. Battery disconnected, release the lever and inspect both halves for moisture, corrosion and pushed-back pins.
- Wheel-speed live data. Roll the car slowly while the tool graphs all four wheels; one flat or jumpy trace means a sensor-side fault, whatever the lamps say.
- Sensor supply wiring for C2112. A chafed harness that shorts the module's regulated sensor supply to battery sets C2112, so inspect the sensor harnesses before blaming the module.
- The communication test. Key on, attempt to connect to the ABS module; if the tool cannot, confirm battery voltage, ignition voltage and a good ground at the connector — all present with no communication is the module.
A mechanic earns their fee here if the brake pedal feels different, if the lamps appeared after a collision, flood or jump-start, or if the voltage checks are outside your comfort. When you order, the form requires the codes from your scan tool and a description of the module's behavior.
Repair, refurbished, used or new: what each really costs
| Option | From | What you receive | What it needs afterward |
|---|---|---|---|
| Our repair of your module | $499 | Your control module repaired at component level, tested under load, coding untouched | Clear codes and a drive cycle; a bleed only if the hydraulic unit was opened |
| Refurbished unit with your data | $950 | A tested unit of the same type, loaded with the VIN, coding and configuration read out of your original; the original then stays with us as the core | The same as a repair |
| Used module | Varies | A unit coded to another car, with no history and no test record | Dealer reprogramming where the tooling allows it; a mismatch can leave the lamps on |
| New module from a Mopar dealer | $465.12 catalog price for 68048305AC (2009–2010 300 / Charger, 2008–2010 Challenger), against a $685 list price, checked October 2026 | A blank module | Dealer programming and configuration to the car |
Those are starting prices: when the bench finds work beyond the service you bought, you get the cost first and nothing happens without your approval. You pick the return speed when you order — the standard tier is $29.95 (3–5 business days), the UPS 2nd Day Air tier $54.95 and the UPS Next Day Air tier $94.95 — while the label to us is bought by the lab and sent by email once you have paid, as a USPS ground label or, with the +$55 rush-inbound option, UPS 2nd Day Air. Standard bench time is about a week; rush repair (+$100) means 2–3 business days on the bench. Every repair and refurbished unit is covered for one year from the ship date, and that coverage is part of the price; the warranty page lists what is and is not included.
If the board is beyond saving, the job pauses until you decide: pay the difference for a refurbished unit (confirmed first) or have the module returned and the repair price refunded minus shipping and a $150 bench evaluation fee. We never send a unit before yours is here — the refurbished unit's data is copied from your original.
Order through start a repair, choosing the any-make ABS repair, or send a label photo through request a quote to have the unit and price confirmed first; the pricing page sets the any-make repair beside the named families.
Removing and shipping the module
Let the engine cool, take the key out, and disconnect the negative battery cable. The brake system is not a place to improvise: if any step below is unclear, have a shop pull the module, and do not move the car under its own power with a brake line disconnected.
- Photograph the label in place. It carries the Mopar number (often with a P prefix) and, on many units, a 25xxxxxxxxx or 28xxxxxxxxx supplier number; the photo is matched to your RMA on arrival.
- Unplug the connector. Swing the locking lever fully open before you pull; forcing it breaks the housing.
- Separate the module from the hydraulic unit. On the years where Mopar sells the module on its own, remove the fasteners around its edge and draw the module straight off; the valve stems stay in the block, the coil pack slides free, the lines stay connected and no bleed follows.
- On a 2015-and-later car, or if the module will not come off, ask first through the quote form. If the whole hydraulic unit has to come out, cap every line port immediately, keep it level, and plan a full brake bleed when it goes back.
- Pack it for a rough ride. Bag the module, wrap it, and box it with padding on all six sides; put your RMA number on the outside and on a slip inside, following the mail-in instructions.
- Ship on our label. The prepaid inbound label reaches you by email after payment; print it, tape it on and hand the box to the carrier. You get an email at each status change, and the track repair page mirrors that timeline.
What happens at the bench
Your module is checked in against its RMA and its label photographed and read before it is powered up on the bench and its stored data and fault memory are read. The pump-motor and valve driver circuits are run under load — the condition that exposes the broken-down components behind C2200 and C2116 — and the fault is repaired at component level on your board; a unit beyond repair stops the job until you have decided what you want. A repaired module is load-tested a second time before it is packed and sent at the return speed you chose, with the coding it arrived with. How it works lays out the whole sequence.
After it is back in the car
Fit the module to the block squarely so the coils seat over the valve stems, tighten the fasteners in a cross pattern, lock the connector and reconnect the battery. Clear the codes, then drive: the module needs to see all four wheels turning above a few miles per hour before it finishes its self-test and drops the lamps.
Should the hydraulic unit have come out of the car, the system needs bleeding at every wheel, ideally with a tool that can command the ABS valves. Your coding comes back on a repaired module and goes into a refurbished one, so the module itself needs no dealer visit — installation, though, follows the vehicle maker's procedure, under which some vehicles still need a brake bleed, initialization or calibration after install. Should a lamp return after a proper drive, write down the code and the conditions and contact us before removing anything.
Part numbers for the 300, Charger and Challenger
Mopar numbers end in a two-letter revision suffix — AA is the first release and AB, AC, AD follow as the part is revised — and a leading zero or a P prefix on the label does not make it a different part. The table holds twelve of the more than eighty numbers on our vehicle line; the rest are on the vehicle page and in the part-number lookup, which also reads label-style numbers such as P04779492AE and P68157545AB.
| Part number | Note from our sourced data |
|---|---|
| 5170344AA | Mopar control module, 2005–2006 Chrysler 300 RWD and 2006 Charger RWD |
| 68003539AA | Mopar ABS module, 2007 Chrysler 300 / Charger |
| 68028992AA | Mopar control module, 2008 Chrysler 300 / Charger |
| 68028990AA | Mopar hydraulic control unit (HCU), 2008 Chrysler 300 / Charger — the block, not the module |
| 68048305AC | Mopar control module, 2009–2010 Chrysler 300 / Charger and 2008–2010 Challenger; $465.12 catalog price when checked |
| 68048306AA | Mopar HCU, 2009–2010 Chrysler 300 / Charger |
| 68067395AA | Mopar ABS module, 2010 Chrysler 300 / Charger / Challenger |
| 68137007AA | Mopar control module, 2011 Chrysler 300 / Charger; replaces 68089527AA |
| 68210119AB | Mopar ABS module, 2013–2014 Chrysler 300 / Charger |
| 68291564AA | Mopar control module, 2015–2016 Chrysler 300 and 2015 Charger; replaces 68258642AC |
| 68341606AC | Mopar ABS module, 2017–2018 Chrysler 300 / Charger and 2017 Challenger |
| 68399772AC | Mopar ABS module, 2020 Chrysler 300 / Charger / Challenger |
FAQ
How much does it cost to repair a Dodge Charger ABS module?
The repair of your own module starts at $499 and a refurbished unit carrying your data starts at $950, with return shipping from $29.95 on top. For comparison, the 2009–2010 module 68048305AC was cataloged at $465.12 (against a $685 list price) when we checked, before programming.
What does C2200 mean on a Chrysler 300?
C2200 is the anti-lock brake module's internal failure code: a self-check inside the control module failed, and tools that show the failure-type suffix display it as C2200-49. It is a module code, not a sensor code, and when it returns after clearing with good battery voltage the module is the repair.
Can the module be repaired, or does it have to be replaced?
The documented failure on this platform is a breakdown of components inside the module, which is what a component-level bench repair addresses while keeping your module and its coding. Replacement becomes the answer only when the board has been damaged beyond repair — water, physical damage or a burn from an outside electrical event — and in that case we tell you first and offer a refurbished unit for the difference.
Does the repaired module need to be programmed?
No programming visit is needed for the module: a repaired unit returns with the coding it left with, and a refurbished unit is written with your VIN and configuration before it ships. You clear the codes and drive, following the procedure for your model year in case it calls for a bleed or a calibration.
Can I keep driving with the ABS and stability lights on?
The base brakes keep working while the module is faulted, so the car stops, but without anti-lock, traction or stability assistance and possibly with cruise control locked out. Drive gently, avoid rain, snow and ice, and get the codes read soon; if the red brake warning is also on, or the pedal has changed, stop driving it.
What if my module cannot be repaired?
Nothing more happens until you have heard from us. Then it is one of two routes: a refurbished unit of the same type with your data cloned onto it, where the amount due is the difference between its price and your payment so far, confirmed before it is charged; or your module sent back and the repair price refunded minus shipping costs and a $150 bench evaluation fee. If a refurbished unit is made, the original stays here as the core.
How long does the repair take?
About a week on the bench, plus shipping each way. A rush repair for +$100 brings the bench time to 2–3 business days, UPS 2nd Day Air to us is +$55, and the return can be 2-day ($54.95) or overnight ($94.95). Because the module comes off without opening the brake lines, the car can be moved while it is away, though without ABS or stability control.
My code is C2100 — do I need a module?
Probably not. C2100 means the module saw low supply voltage, and the usual causes are a battery near the end of its life, a charging fault or a corroded cable or ground. Fix the voltage, clear the code and drive; send the module only if a module code such as C2200 returns with the voltage proven good.
Sources
- Mopar parts catalog, Chrysler 300 ABS control module: https://www.moparpartsgiant.com/oem-chrysler-300-abs_control_module.html
- Mopar parts catalog, Dodge Charger ABS control module: https://www.moparpartsgiant.com/oem-dodge-charger-abs_control_module.html
- Mopar parts catalog, Dodge Challenger ABS control module: https://www.moparpartsgiant.com/oem-dodge-challenger-abs_control_module.html
- Code definitions C2101 and C2112: https://www.autocodes.com/c2101_dodge.html and https://www.autocodes.com/c2112_dodge.html
- Owner report of C2200-49 (forum thread): https://www.chargerforums.com/threads/c2200-49-abs-module-has-detected-an-internal-electronic-error.396218/
- The C2200 / C2116 definitions, the failure description, the U0121 definition and the label-style supplier numbers come from independent rebuilder listings; C2100 from a Q&A site; 68276897AB from a marketplace listing. Those are not neutral hosts, so they stay unlinked.


