ABS Module Lab

Dodge Durango and Chrysler Aspen ABS Module Failure and Repair

ABS Module Lab Team · · 16 min read

ABS module faults on the 2004–2009 Durango and Aspen (Bosch 8.0) and the 2011–2020 Durango WD: recall 24V-838, codes C2101 and C2112, repair from $499.

A three-row SUV raised on a two-post lift in a repair shop while a technician below aims a work light at the brake lines along the frame.

The two Durango generations covered here use different ABS units: the 2004–2009 HB Durango and its Chrysler Aspen twin are filed under Bosch 8.0, while the 2011–2020 WD Durango carries a unit listed as ZF. If yours is a 2018 or 2019 WD, put the VIN into nhtsa.gov/recalls before spending anything, because recall 24V-838 covers some hydraulic control units that misread brake pressure and the dealer remedy is free. Otherwise the choice is a repair of the module you have, from $499 plus return shipping, or a refurbished unit carrying your data, from $950, and the first job is reading the ABS codes, since the WD's C2100, C2101 and C2112 report voltage problems that can start outside the module.

Which Durango and Aspen models have this ABS unit

Durango line Model years Unit listed Service to order Page
HB Durango and Chrysler Aspen 2004–2009 Bosch 8.0 Bosch 8 repair 2004–2009 Durango and Aspen
WD Durango 2011–2020 ZF, with stability control Any-make ABS module repair 2011–2020 Durango (WD)

HB Durango and Chrysler Aspen, 2004–2009

The HB line is filed under Bosch 8.0 and priced in the Bosch ABS / ESP 8 family: a Bosch hydraulic unit with an integrated control unit mounted on its valve block, which on many units unbolts and lets the brake lines stay on the truck. The Aspen is Chrysler's version of the HB and shares its page. On the early trucks the drivetrain decides the number: Mopar lists separate 2WD and 4WD modules for 2004–2005 and again for 2006, while the 2009 module is listed for the 3.7L, 4.7L and 5.7L engines. Nothing on file says whether a given HB has stability control.

WD Durango, 2011–2020: the recall comes first

Recall 24V-838 covers some 2018–2019 Durango hydraulic control unit / ABS modules that falsely read pressure in the primary brake circuit. On an affected truck the brake lamps can stay lit, ABS and ESC can be shut off with the ABS, ESC and red Brake warnings showing at start-up, and the Durango can start and shift out of park without the brake pedal being pressed. The recall report lists units 68336274AB and 68408605AB, and a second recall, 22V-426, lists module 68442477AC for Durangos built between June 10, 2018 and April 30, 2019. Enter the VIN at nhtsa.gov/recalls first: when a recall is open, the dealer remedy costs you nothing, which beats any price in this guide.

Outside the recalls, the WD's unit is named as ZF in the 22V-426 recall report. With no catalog family to file it under, the WD is ordered as the any-make ABS module repair, from $499 like most named families, and the bench reads the exact unit from the label once the box arrives. The WD has electronic stability control, run by the same module as its anti-lock brakes and traction control.

The WD's hardware overlaps with the Jeep of the same years: 23 of the 34 WD numbers on file are listed for the 2011–2021 Grand Cherokee WK2 as well, from 68085396AB in 2011 to 68442478AA in 2019–2020. If you own both, the Grand Cherokee guide covers the Jeep.

Symptoms of a failing ABS module on the Durango and Aspen

On an HB Durango or Aspen, the two codes on file describe what you are likely to notice. C1073, the pump motor control circuit, fits a pump that will not run when the module calls for it, or one that will not stop. C121E, the brake pressure transmitter, fits a module that has stopped trusting its pressure reading. In both cases the ABS lamp lights and anti-lock braking switches off, along with stability control on a truck that has it.

On a 2018–2019 WD, the recall symptoms above are the first thing to rule out, above all a truck that starts without the pedal pressed or keeps its brake lamps lit. Beyond the recall, every WD code on file concerns voltage. Lamps that arrive with a weak battery, after a jump start or with a charging fault, and leave once the voltage is right, point at the supply rather than the module.

A fault inside either module can start part-time: lamps that appear after a long highway run or a cold soak, are gone after a restart, and come back until they stay on from the first mile. Through all of it the base brakes still stop the truck; what is lost is the anti-lock release on a slippery stop, plus traction and stability help where fitted.

The fault codes you will see

A scan tool that reads only the engine computer will not show these. The codes on file split cleanly by generation.

Code Meaning Durango line What it points to
C121E Brake pressure transmitter HB The pressure sensor signal the module reads, its wiring or the module's input
C1073 Pump motor control circuit HB The module's pump-motor driver, the motor itself or the motor's feed
C2100 Battery (supply) voltage low WD A weak battery, a charging fault, or a voltage loss on the module's feed or ground
C2101 Battery voltage high WD Overcharging, or a charger or jump pack left connected
C2112 Sensor supply 1 voltage circuit high WD The module's regulated sensor supply, or a sensor or wire pulling it high

Chrysler's rear-drive cars of the same years report the same C2100 and C2101 voltage codes, and the Chrysler 300, Charger and Challenger guide treats them in depth.

A scan tool that cannot reach the ABS module at all means the module has lost power, ground or its network link, or has failed inside. Check the ABS fuses, then battery voltage at the module's power pins with the ignition on and the ground path back to the battery, and look for corrosion in the connector. If the rest of the truck's modules answer the tool and hold a lost-communication code for the ABS module, the network is working and the gap is the ABS module or its own wiring; once power, ground and that wiring are proven, the silence is a bench repair.

Why these modules fail

HB: the pump driver and the pressure input

The HB's two codes point at two stages of the Bosch control unit. C1073 covers the pump-motor control circuit, from the driver on the board that switches the motor's heavy current to the motor itself; heat and age wear the driver, and a motor that drags makes it work harder. C121E belongs to the input that reads the brake pressure transmitter, where the fault can be the sensor, its wiring or the module's own measuring circuit. The Bosch 8 family page describes what the bench checks on this unit.

WD: the recall fault and the supply codes

The recall describes the one module-side failure on file for the WD: a unit that senses brake pressure that is not there. The WD's codes are the module measuring its own supply: C2100 and C2101 are its battery-voltage readings out of range, and C2112 is its own regulated output to the sensors reading high. The first two start with the battery and alternator, while C2112 can be the regulator inside the module or a sensor or wire shorted to a higher voltage outside it.

Outside the module altogether sit the wheel-speed sensors and tone rings, the harness, a pump motor that has seized, a hydraulic block that leaks inside, and the brake lamp switch, which can keep the brake lamps lit on its own.

Check these before you condemn the module

  1. The recall, on a 2018–2019 WD. Run the VIN at nhtsa.gov/recalls before anything else.
  2. Battery and charging. Measure voltage at the battery and at the module's power pin with the engine running. A low or high reading at the battery points to the battery or charging system; a difference between the two is wiring.
  3. Fuses. Test the ABS fuses on both sides with a test light while the key is on.
  4. Grounds. Clean the battery terminals and the ground straps, then measure the voltage drop on the module's ground circuit while the scan tool commands the pump.
  5. The connector. Battery off, unplug the module, inspect for green corrosion, water and bent terminals, clean and reseat it, then clear the codes and drive.
  6. The sensor supply (C2112). Inspect the harness to the sensors the module powers for chafing against anything live; with the code active, unplugging those sensors one at a time and rechecking can find a shorted sensor before the module is blamed.
  7. The pump (C1073). Command the pump with the scan tool and listen; check the pump fuse and the module's ground before suspecting the driver.
  8. The pressure reading (C121E). In live data, watch the pressure value with the pedal released and then pressed. A reading that never moves, or never returns to rest, points to the transmitter circuit.
  9. Wheel speeds. Watch all four on a slow drive; one that drops out or lags is a wheel-end problem.

If the pedal has gone soft or low, if the fluid level is falling, or if the truck cannot be raised and supported safely at home, let a shop take over. We repair modules, not vehicles.

Repair, refurbished, used or new: what each really costs

Choice Cost What you get Before the truck is right
Recall remedy, 2018–2019 WD with an open recall Nothing, at a dealer The fix the recall prescribes The dealer's procedure
Repair of your module From $499 Your own Bosch 8.0 or WD module repaired on the bench, its coding intact, with the 1-year warranty Refit, clear codes, road test
Refurbished unit with your data From $950 A reconditioned unit of the same type carrying the VIN, coding and configuration taken from your original, which stays here as the core As for a repair
Used module Not quoted A module from another truck, coded to it, of unknown history; on a 2018–2019 WD, compare its number with the recall numbers above Coding to your VIN at a shop
New Mopar module No price on file for either generation New hardware under the current number The installer can tell you whether programming is needed and what it costs

These are starting prices: if the bench finds more than the service covers, the extra is quoted to you and done only with your approval. Shipping and speed are priced separately:

Shipping or speed option Price Time
Prepaid label to the lab Included USPS ground
Rush inbound label +$55 UPS 2nd Day Air to the lab
Standard return $29.95 3–5 business days
UPS 2nd Day Air return $54.95 2 business days
UPS Next Day Air return $94.95 Next business day
Bench time Included About a week
Rush repair +$100 2–3 business days on the bench

Included in every price is a 1-year warranty, running from the ship date, on every repair and refurbished unit; there is no other warranty to buy, and the warranty page sets it out. Order the Bosch 8 repair for an HB or Aspen and the any-make repair for a WD from the table above, or have the number confirmed first by sending a label photo with request a quote.

Should the bench find the module beyond repair, nothing more happens until you answer. You can switch to a refurbished unit and pay only the difference over what you have paid, or take your module back with the repair price returned, shipping and a $150 bench evaluation fee deducted. No refurbished unit goes out before your original comes in, because the data it needs is read from your original, which then stays with us as the core at no extra charge.

Removing and shipping the module

HB Durango and Aspen

The HB's Bosch 8.0 carries its control unit on the valve block. Many units let it unbolt there, with every brake line left in place and the fluid untouched, and in that case only the control unit goes in the box.

WD Durango

No family rule on this site covers the WD's ZF unit, so take a photo of it in place and send it through the quote form before you loosen anything; the reply says whether the control module comes off by itself or the whole unit has to come out.

  1. Order first; the RMA and the prepaid label arrive by email.
  2. Disconnect the negative battery cable, give it a few minutes, and keep the ignition off while the module is unplugged.
  3. If you work from underneath, support the truck on a lift or on stands, never on a jack alone.
  4. Clean the unit and the area around it before opening anything, so road grime cannot reach the valves.
  5. Unclip the connector and pull it off squarely, then remove the module's screws and lift it away without prying against the valve stems.
  6. If the whole hydraulic unit has to come out, cap each line and port the moment it is opened, keep the unit upright, and note on the order that the complete unit is in the box.
  7. Photograph the label, seal the module in a plastic bag with the connector covered, pack it with plenty of padding on all sides, mark the RMA inside and out, and attach the prepaid label.

A Durango waiting for its module brakes like a truck with no ABS at all, every related warning lit, so move it gently and only if no line was disturbed. If a line was opened, it does not move until the brakes are bled and the pedal is hard again. Packing details are on the mail-in instructions page.

What happens at the bench

At check-in the module is matched to your RMA and its label is photographed. The bench then powers it, reads what it has stored, fault history included, and runs the pump-motor and valve circuits under a real load; on an HB, that load test is where a C1073 driver fault shows itself. The fault is fixed on your module, so the Durango's coding stays where it was, and the module is retested before it is boxed and shipped with tracking. A module past repair stops the job until you decide, and How It Works has the full route.

After it is back in the car

Refit the module with the battery disconnected, tighten its screws evenly and press the connector home until it locks. Reconnect the battery, clear the codes in every module that stored one, and drive slowly at first so the module can finish its checks; the warning lamps should go out. Try the pedal in the driveway before taking the truck into traffic.

A unit that came out with its lines opened has to be bled by the maker's procedure. With either Durango, some vehicles still need a brake bleed, initialization or calibration after install. Run the recall check again on a 2018–2019 WD if the truck ever starts without the pedal pressed.

Part numbers for the Durango and Aspen

Eighteen HB and Aspen numbers and thirty-four WD numbers are on file, all searchable in the part-number lookup, which returns the line, the family and the price.

Part number Line Catalog note
5102370AA HB "ABS Control Module", 2004–2005 Durango 2WD
5102371AA HB "ABS Control Module", 2004–2005 Durango 4WD
5160602AA HB "ABS Control Module", 2006 Durango 4WD
5161607AA HB ABS module, 2006 Durango 4WD; replaced by 5161607AB
68053292AA HB ABS module, 2009 Durango, 3.7L, 4.7L and 5.7L
68085396AB WD ABS module, 2011–2012 Durango, shared with the 2011 Grand Cherokee
68139769AA WD ABS module, 2012 Durango
68157062AB WD ABS module, 2013 Durango; replaced by 68157062AD
68225504AA WD "ABS Control Module", 2014 Durango
68262200AB WD "Hydraulic-Anti-Lock Brake System", 2014–2025 Durango
68309727AB WD ABS module, 2016 Durango; replaced by 68309727AC
68404410AA WD "ABS Control Module", 2018 Durango, SRT included

Mopar lists 68262200AB for Durangos all the way to 2025, past the 2020 end of the line covered here, so on a 2021-or-later truck the label decides what you have. Numbers with a P prefix are on file for the HB as well: P52855644AE is listed as compatible with P52855644AD and P52855644AB.

FAQ

Is there a recall on the Dodge Durango ABS module?

Yes, for some 2018–2019 WD Durangos: recall 24V-838 covers hydraulic control unit / ABS modules that can falsely read pressure in the primary brake circuit, and recall 22V-426 lists ABS module 68442477AC for trucks built from June 10, 2018 to April 30, 2019. Check the VIN at nhtsa.gov/recalls before paying for any repair. If a recall is open on that VIN, the dealer remedy is free.

What does C2101 mean on a Dodge Durango?

C2101 on a Durango WD means the ABS module measured battery voltage above its limit. Check the charging voltage with the engine running, and look for a battery charger or jump pack left connected, before suspecting the module. If the charging system is right and the code keeps returning, the module's own voltage reading comes under suspicion, and the bench can test it.

How much does Dodge Durango ABS module repair cost?

Repairing the ABS module from an HB Durango, a Chrysler Aspen or a WD Durango starts at $499, plus return shipping from $29.95, with about a week on the bench. A refurbished unit carrying your truck's VIN, coding and configuration starts at $950. No new-module price for either generation is on file, and a 2018–2019 WD with an open recall is fixed by the dealer at no cost.

Does the Chrysler Aspen use the same ABS module as the Durango?

The Chrysler Aspen belongs to the same 2004–2009 HB line as the Durango, filed under Bosch 8.0, so it gets the same Bosch ABS / ESP 8 repair at the same price. Whether a given Aspen module carries the same number as a given Durango's depends on year, drivetrain and engine, so go by the number on your own label.

Can I drive a Durango with the ABS light on?

A Durango with only the ABS lamp lit still brakes on its base system, but without anti-lock release and, on stability-equipped trucks, without traction and stability control. If the red Brake lamp is also on, or a 2018–2019 WD starts without the brake pedal pressed, stop driving it and check the recall and the brakes first.

Does a repaired Durango ABS module need programming?

A repaired HB or WD module returns with the coding it already had, and a refurbished unit is written with the data from your original before it ships. After either is installed, follow any initialization the scan tool asks for. With a new dealer module, the installer can tell you whether programming is needed and what it costs.

What if my Durango ABS module cannot be repaired?

If the bench finds a Durango or Aspen module beyond repair, it stops and asks you how to proceed. A refurbished unit with your data costs only the difference from what you have paid; the alternative is your module back with the repair price refunded, minus shipping and a $150 bench evaluation fee.

What warranty comes with a Durango ABS module repair?

A Durango or Aspen module repair, and any refurbished unit, carries a 1-year warranty starting the day it ships back. It comes included, and no other warranty is sold.

Sources

  • Mopar part numbers, catalog descriptions and supersessions: moparpartsgiant.com Dodge Durango ABS control module listings, page 1, page 2 and page 3.
  • Recall 24V-838, the primary-circuit pressure reading and units 68336274AB and 68408605AB: NHTSA recall report 24V-838.
  • WD unit (ZF), recall 22V-426 and module 68442477AC: NHTSA recall report 22V-426.
  • C2101 and C2112 for Dodge: autocodes.com, C2101 and C2112.