ABS Module Lab

Ford F-150 and Expedition ABS Module Failure: Repair Guide

ABS Module Lab Team · · updated · 16 min read

Which ABS unit each F-150 and Expedition generation carries, the B1342, C1300 and U0121 codes it stores, and what a repair, refurbished or new module costs.

Close-up in the engine bay of a full-size pickup truck: the ABS hydraulic control unit mounted on the frame with steel brake lines attached, a technician's hand working a flare-nut wrench on one of the line fittings in daylight

Ford put four different anti-lock units in the F-150 between 2000 and 2020, and the 2007–2014 Expedition carries a fifth, so the first job is knowing which one is under your hood: the symptoms overlap but the repairs do not. On every one of them the control module unbolts from the hydraulic block, which keeps the brake lines closed and makes the job a mail-in. A repair of your own module starts at $499 ($325 for the Kelsey-Hayes EBC325 on the 2000–2004 truck), a refurbished module with your data starts at $950, and a new Ford module lists from about $454 to $569 where our data has a price, before programming.

Which F-150 and Expedition models have this ABS unit

Ford's catalog is the clearest guide to what separates from what: for most of these trucks it lists a 2C219 part, the control module (ECU) alone, and a 2C215 or 2C405 part, the module with the hydraulic control unit (HCU). That split is why only the module needs to ship.

F-150, 1997–2003 body and the 2004 Heritage

The 2000–2004 F-150 of the old body uses a Kelsey-Hayes EBC325 (the "325"), a plastic-cased electronic brake control module bolted to the side of the valve body, in the Kelsey-Hayes EBC325 family, the one unit here repaired for $325. Ford's 2004 catalog still lists its repair kits, YL3Z-2C219-A (under 7,700 GVW, rear discs) and YL3Z-2C219-B (7,700 GVW), beside the new-body numbers, which is how the 2004 Heritage is covered.

F-150, 2004–2006 (new body, early years)

The 2004–2006 F-150 of the 2004–2008 body switched to a Bosch 5.4, with the control module (2B373 and 2C219 numbers) and the hydraulic control assembly (2C065 numbers) as separate service parts. Bosch 5.4 is not one of the unit families on this site, so this truck's page sells the any-make repair at the same $499 starting price and the bench identifies the board on arrival. Our data confirms the unit only for 2004, so on a 2005 or 2006 truck photograph the label.

F-150, 2007–2014

The 2007–2014 F-150 uses a Bosch 8.0 with stability control; the 2007–2008 trucks also came with a Bosch 8.1, the "mini 8.0", under Bosch numbers 0 265 800 481 and 0 265 800 755. Both sit in the Bosch ABS / ESP 8 family. Ford's module numbers run from 7L3Z-2C219-A in 2007 through DL3Z-2C219-A, -B and -C in 2013–2014, with module-plus-HCU assemblies under CL3Z-2C215 and DL3Z-2C215.

F-150, 2015–2020

The 2015–2020 F-150 is listed in our data as a Bosch 9.0, in the Bosch ABS / ESP 9 family. That attribution rests on one rebuilder's vehicle list rather than a Ford document, so treat it as likely rather than proven and send a photo of the label. No fault-code list for this generation made it into our data.

Expedition, 2007–2017

The 2007–2017 Expedition, and the Lincoln Navigator built beside it, is listed with a Continental Teves MK61 on the 2007–2014 trucks, which places it in the ATE / Continental MK60 / MK61 family. The identification comes from rebuilders' application lists, supported by the ATE-pattern supplier numbers (28526005023 style) on the 2008–2012 assemblies; no Ford document naming the supplier is in our data. Ford's module numbers run from 7L1Z-2C219-A (2007–2009 Expedition and Navigator 5.4L) to DL1Z-2C219-A (2012–2013), with the assembly AL1Z-2C405-B covering 2010–2014. The 2015–2017 Expedition moves to FL1Z-2C219-B and -C for the module and FL1Z-2C215-B and -C for the assembly, and the unit on those years is not verified.

Symptoms of a failing ABS module on the F-150 and Expedition

The ABS lamp alone, steady, with the brakes feeling normal, is the mild end. On the 2007 and later trucks the stability-control lamp and the traction-control message join it, because the module that failed runs those systems too.

The symptom that marks out the 2007–2014 F-150 is a speedometer that drops to zero, flickers or reads low while the truck is moving. The module processes the wheel-speed signals that feed the speedometer, so a module losing its inputs takes the speedometer with it.

A pump that runs when it should not is the documented Kelsey-Hayes complaint on the 2000–2004 truck: the ABS pump runs constantly, and a pump that will not stop ends up draining the battery or blowing its fuse. On the Bosch 8 truck the equivalent code is C1300.

Intermittent behavior means something. Lamps that come on after the truck has warmed up, or over rough roads, and clear after a restart point to a cracked connection inside the module; lamps on from the first key cycle every day point to a failed component or a dead supply.

The fault codes you will see

Have the codes read from the ABS module itself; a reader that only sees the engine module shows nothing, or only a U0121 from the powertrain module.

Code Meaning What it points to
C1300 Pump motor will not run or will not stop running (F-150 2007–2014) The pump-motor driver stage in the module, or a seized motor
B1342 Internal fault / ECU internal fault (F-150 2007–2014; Expedition 2007–2014) The module has failed its own self-test
C1440 Listed for the 2007–2014 F-150 without a meaning; on the E-Series the same code is brake pressure transducer malfunction The pressure sensor circuit read by the module
U0121 Lost communication with the anti-lock brake system control module (F-150 2007–2014) Set by other modules when the ABS module stops talking: a dead module or a dead feed
U3000:49, U3000:41 Control module fault (Expedition 2010–2014) Internal electronic failure of the MK61 module
C1095 ABS hydraulic pump motor circuit failure (F-150 2000–2006; C1095/C1096 on the Kelsey-Hayes) Pump driver in the module, the motor or its feed
C1185, C0265 ABS power relay output circuit failure / open internal power relay (F-150 2000–2006); power relay code (F-150 2000–2004) The relay inside the module that feeds the valves and pump
C1194, C1198, C1202 Front left dump valve (C1194/C1195), front left isolation valve (C1198/C1200) and rear dump valve (C1202/C1204) malfunction (F-150 2000–2004) A valve driver in the module or the valve coil
C1145, C1155 Right front and left front wheel speed sensor input circuit failure (F-150 2004–2006) The sensor, its wiring or the tone ring before the module

If the tool gets no answer from the ABS module at all, you will see U0121 in the powertrain or body module, an empty ABS menu and every lamp on. Either the module has died or it is not being powered. Prove power and ground at the module connector with a meter before concluding the module is dead; if both are there and it still does not answer, it is.

Why these modules fail

Three of the five units here have a documented failure in our data.

The Kelsey-Hayes EBC325 on the 2000–2004 F-150 fails in the pump-motor and isolation/dump-valve driver stages. The rebuilder descriptions in our data say the repair addresses "ABS pump constantly running" and failures across those drivers, which matches the codes above: C1095/C1096 for the motor, C1194 to C1204 for the valves, C0265 and C1185 for the internal relay.

The Bosch 8.0 and 8.1 on the 2007–2014 F-150 present as no communication with the ABS module, all warning lights on, a speedometer that does not work and an internal fault code, B1342; the pump-motor driver sets C1300 when it fails. Internally the control unit's power supply and processor section stop responding, or a connection between the board and the valve coils or the motor opens. A repair addresses those connections and the failed components, and keeps the module's own configuration.

The MK61 on the 2007–2014 Expedition is targeted by the same symptoms: B1342 ECU internal fault, U3000:49 and U3000:41 control-module faults and loss of communication. On Continental units the control unit bolts over the valve coils, and the coil connections and the internal power stage are where the faults sit.

For the 2004–2006 Bosch 5.4 and the 2015–2020 Bosch 9.0 our data holds no documented failure, and we will not invent one.

Now the things that are not the module. A wheel-speed sensor, chafed sensor wiring or a rusted tone ring sets a code for one wheel (C1145 or C1155 on the 2004–2006 truck) and shows as one wheel reading zero in live data; a corroded connector or ground gives power codes and intermittent communication; a worn pump motor looks like C1300 or C1095 but is cured by a motor. The module is the right suspect when the code is internal (B1342, U3000:49/41), when the pump or a valve driver is named, or when nothing answers and power is proven at the connector.

Check these before you condemn the module

These separate the module from the things around it, and a shop can do all of them in one visit.

  1. Battery and alternator. Low voltage sets ABS and stability codes that clear once the battery is replaced; load-test it and check charging voltage first.
  2. ABS fuses. There is a small one for the module's logic and a large one for the pump and valves; on the Kelsey-Hayes truck a pump that ran all night blows the big one and leaves a dead-looking module.
  3. Grounds. Find the ABS ground on the frame rail or inner fender and clean it to bare metal; a ground reading a few ohms is enough to drop communication.
  4. The module connector. With the battery disconnected, release the lever and inspect the pins for corrosion, spread terminals or moisture.
  5. Wheel-speed live data. Drive at walking pace with the scan tool graphing all four speeds. A wheel that reads zero, drops out over bumps or lags is a sensor, wiring or tone-ring problem.
  6. The communication test. Back-probe the module's power and ground pins with the key on. Battery voltage on the feeds and a good ground, with the tool still unable to connect, confirms the module.
  7. The pump. On a running-pump complaint, unplug the module connector; if the pump stops, the driver or relay inside the module is holding it on. If it keeps running with the module unplugged, the fault is in the wiring, not the module.

Still unsure? Photograph the label and send it with the codes through the quote form; we tell you what the unit is before you order.

Repair, refurbished, used or new: what each really costs

Starting prices, charged at checkout; anything the bench finds beyond the service is priced for your approval before the work goes ahead.

Option Starting price What it includes Follow-up in the truck
Repair of your module From $499 for the Bosch 8, Bosch 9 and MK61 units and the Bosch 5.4 (any-make repair); from $325 for the Kelsey-Hayes EBC325 Your module, repaired at component level and bench-tested, configuration intact; 1-year warranty Bolt it on, clear codes, drive; no bleed while the lines stay closed
Refurbished module with your data From $950 A same-family module programmed from your truck's own data; your old module stays with us as the core; 1-year warranty Identical to a repair
Used module Varies A module configured to another truck with an unknown history; a prefix match can still be the wrong drive or GVW version Dealer-level configuration; owner reports on the 2015–2020 generation say used Ford modules often need it
New control module from Ford $568.55 list for 7L1Z-2C219-A (2007–2009 Expedition and Navigator); $453.56 for GL3Z-2C219-C (2015–2016 F-150) from a Ford catalog listing in our data; none in our data for the 2000–2014 F-150 A new module with Ford's parts warranty Dealer programming, then code clear and a drive

Return shipping is extra: $29.95 buys standard delivery in 3–5 business days, $54.95 buys UPS 2nd Day Air and $94.95 buys UPS Next Day Air. The inbound label is prepaid and included; rush inbound, $55, makes it UPS 2nd Day Air. Expect about a week on the bench; for an extra $100 the rush option cuts that to 2–3 business days. The warranty is 1 year on every repair and refurbished unit, with the clock starting when it ships back; what it covers is on the warranty page.

There is no advance exchange: your module must reach the bench first, because your truck's data is read out of it and written into the replacement. And if the module cannot be repaired, the work stops until you choose: the refurbished module (from $950) with only the difference owed, confirmed with you beforehand, or your module returned and the repair price refunded minus the shipping and a $150 bench evaluation fee. To order, use the Bosch 8 family page for the 2007–2014 F-150, the other family pages linked above, or go straight to start a repair.

Removing and shipping the module

On all of these trucks the control module comes off the hydraulic block, so the brake lines stay closed and the truck keeps its base brakes while the module is away.

  • Disconnect the battery negative cable and wait a minute before unplugging the module.
  • Photograph the label before removal; the engineering number (2C346 or 2C405 style) and the service number can both appear, and the Kelsey-Hayes module may carry its own number too.
  • Remove the screws holding the module to the block. On the Bosch and Continental units the module lifts straight off the valve coil pins; on the Kelsey-Hayes the module comes off the valve body on its own. Do not pry against the aluminum block.
  • Leave the pump motor and the hydraulic block in the truck and do not open a brake line; if you must loosen a fitting, cap the port, plug the line and plan on a bleed.
  • Cover the exposed coils and pins on the block with a clean bag taped in place.
  • Wrap the module in bubble wrap, box it with padding on all sides, protect the connector face and write the RMA number from your confirmation email on the box.
  • Use the prepaid label from the same email. The mail-in instructions page walks through each step with pictures.

Brakes are a safety system. If any of this is unfamiliar, have a shop remove and refit the module.

What happens at the bench

When the box arrives the module is matched to its RMA and the label photographed. It is then powered on a bench fixture that lets us read its stored data and fault memory and drive the pump and valve outputs under load, which is how a weak driver stage or an open coil connection shows itself. The repair is done at component level on the board, the unit is tested again the same way, and it goes back carrying the configuration it arrived with; if the board cannot be brought back, we stop and ask how you want to proceed. How it works lays out the full sequence.

After it is back in the car

Mount the module with the screws evenly tightened, reconnect the harness until the lever locks, and reconnect the battery. Because the lines stayed closed, a brake bleed is not needed unless you opened a fitting. Clear the codes in the ABS module and in the powertrain and body modules.

Then drive the truck. The module runs a self-test once the truck is rolling and the lamps go out after it has seen all four wheel speeds. Your repaired module keeps its own configuration, so no dealer programming is required for it. Some vehicles still need a brake bleed, initialization or calibration after install; the scan tool's ABS menu lists what your truck asks for.

Part numbers for the F-150 and Expedition

Ford prints an engineering number on the module and sells it under a different service number, and both may be on the label. Enter whichever you can read into the part-number lookup; it accepts numbers with or without the dashes.

Part number Fits Note
YL3Z-2C219-A 2000–2003 F-150, 2004 F-150 Heritage Kelsey-Hayes EBC325 repair kit, under 7,700 GVW with rear discs; -B is the 7,700 GVW version
4L3Z-2B373-BA 2004 F-150 4WD, 4.2L/4.6L/5.4L Control module (ECU) for the Bosch 5.4; hydraulic assembly 4L3Z-2C065-BA
6L3Z-2C219-A 2006 F-150 RWD Electronic control unit, brake controller; 6L3Z-2B373-BA for 4WD
7L3Z-2C219-A 2007 F-150 ECU module assembly, Bosch 8; the 8.1 units of 2007–2008 carry 0 265 800 481 or 0 265 800 755
9L3Z-2C219-G 2009 F-150, 4.6L/5.4L Control module
AL3Z-2C219-C 2010 F-150 Control module; -F, -H and -L also seen
DL3Z-2C219-B 2013–2014 F-150 4WD -C is RWD, -A the 2013 4WD; module-plus-HCU is DL3Z-2C215-A (4WD) or -B (RWD)
HL3Z-2C219-C 2017–2020 F-150 HL3Z-2C219-B for 2017–2018; KL3Z-2C219-E for 2019–2020 as a brake repair kit
7L1Z-2C219-A 2007–2009 Expedition and Navigator 5.4L ABS control unit, module only; $568.55 list in our data
AL1Z-2C405-B 2010–2014 Expedition Module with ABS control unit; engineering numbers on these years run AL1T-2C219-DA to DL1T-2C219-AA
FL1Z-2C219-C 2015–2017 Expedition Control module, ECU only; FL1Z-2C215-B and -C are the module with HCU

FAQ

How much does it cost to repair an F-150 ABS module?

From $499 for the 2004–2020 F-150 and the Expedition, $325 for the Kelsey-Hayes EBC325 on the 2000–2004 truck, plus return shipping from $29.95; a refurbished module with your data from $950. Ford's list price for a new module in our data is $568.55 for the 2007–2009 Expedition and $453.56 for the 2015–2016 F-150, before programming.

Can my F-150 ABS module be repaired rather than replaced?

The documented failures on these trucks are in the module's electronics: the pump and valve driver stages on the Kelsey-Hayes EBC325, the internal fault and communication loss on the Bosch 8 and the MK61. Those are board-level faults repaired at component level.

Will I need programming after the repair?

Not for a repaired module, which keeps the configuration it had, and not for a refurbished module from us, which is written with your truck's data before it ships. A used module from another truck does need configuring to yours, and owner reports on the 2015–2020 generation say that is often a dealer job.

Can I drive the truck with the light on, or while the module is away?

The pedal still works the brakes either way, but a hard stop can lock the wheels and the stability control will not catch a slide; on the 2007–2014 F-150 expect no speedometer while the module is out, since it uses the module's wheel-speed data. Get the codes read soon, and park the truck for the week the module is away.

What if the module cannot be repaired?

The work stops and you hear from us first. Either you switch to a refurbished module of the same family carrying your data, from $950, and pay just the balance above what you already paid after we confirm it, or the module comes back to you and the repair price is refunded, shipping excepted.

How long is the warranty?

A year, counted from the day the module ships back. That one term applies to repairs and refurbished units alike. It covers our work on the module, not sensors, wiring, the hydraulic unit or electrical damage from outside it; on a claim you pay the shipping in both directions.

Which unit does a 2004 F-150 have?

It depends on the body. The 2004 F-150 Heritage, the old 1997–2003 body sold alongside the new one, keeps the Kelsey-Hayes EBC325 and its YL3Z-2C219 kits; the new-body 2004 F-150 has the Bosch 5.4 with 4L3Z-2B373-BA as its module. The label settles it; the part-number lookup tells you the family.

Sources