ABS Module Lab

Audi ABS Module Repair: A4, A6 and Q5 Bosch Units by Generation

ABS Module Lab Team · · 17 min read

Which Bosch ABS unit your Audi A4, A6, A5, Q5 or Q7 carries from B5 to B9, what 01418, 01421 and C123EF0 mean, and what a repair or refurbished unit costs.

A compact brake hydraulic unit with five threaded brake-line ports, an electric pump motor and a black electronic module on a perforated gray bench mat beside two screwdrivers.

Audi's A4, A6, A5 and Q5, and the 2016–2020 A7 and Q7, use Bosch ABS units from four generations (5.3, 5.7, 8.0 and 9.0), and the failures on file center on the electronic control unit fixed to the hydraulic block: the scan tool loses contact with it, a pump or valve circuit drops out, or a 2016–2020 Bosch 9.0 car stores C123EF0. Repairing your own control unit starts at $499, and a refurbished unit with your car's coding cloned onto it starts at $950. Before you spend anything, read the fault memory and photograph the module label, because the numbers printed there, not the model year, decide which repair you order.

Which Audi models have this ABS unit

Five Audi lines in our data carry Bosch units. Each row links the line's vehicle page and gives the unit on file; the last column is the family you order under.

Vehicle page Models on the line Unit on file Order under
1998–2003 A4 / S4 (B5) A4 and S4 (B5), early A6 (C5), A8 (D2) Bosch ABS 5.3 Bosch 5.3
2002–2008 A4 / S4 / Cabriolet (B6, B7) A4, S4, Cabriolet (B6, B7); A6 / S6 / RS6 (C5, 2002–2004); A8 (D3, 2003–2008) Bosch 5.7; the B7 A4 also listed under Bosch 8.0 from 2005 Bosch 8
2008–2012 A4 / S4 / Avant (B8) A4, S4, Avant (B8); A5 / S5 (8T); Q5 (8R) Bosch 8.0 ABS/ESP Bosch 8
2005–2011 A6 / S6 (C6) A6 / S6 (C6); A8 (2005–2012) Bosch 8.0 ABS/ESP Bosch 8
2016–2020 A4 / A4 allroad / A5 (B9) A4, A4 allroad, A5 (B9); A6 / A7 (C7, 4G); Q5 (FY, 80A); Q7 (4M) Bosch 9.0 ABS/ESP Bosch 9

The B6 and B7 A4: a Bosch 5.7 line sold as Bosch 8

The 2002–2008 line is on file as a Bosch 5.7, with the B7 A4 also listed under Bosch 8.0 from 2005. The failure notes on file describe the 5.7 on 2002–2005 A4, A6 and A8 cars, yet the catalog sells the whole line in the Bosch 8 family. Read plainly, a 2002–2004 car here is a 5.7 in our data, and a 2005–2008 B7 can carry either unit.

The Bosch number's first digits do not settle it: the four on file for this line (0 265 950 080, 011, 012 and 079) share their 0 265 950 start with Bosch 8.0 numbers on file for the B8 (0265950958) and the C6 (0 265 950 473). Send a photo of the whole label with your order. The Bosch 5.7 page describes the older unit, and its prices match Bosch 8, so the generation changes the paperwork, not the cost.

The C5 A6 and the A8 sit on two lines

The early C5 A6 is on the B5 list with the Bosch 5.3, while the 2002–2004 A6, S6 and RS6 are on the B6/B7 list with the 5.7, so a 2002 or 2003 car needs its label read. The A8 spreads wider: the D2 is on the 5.3 list, the D3 (2003–2008) on the 5.7 list, and the C6 line lists the A8 from 2005 to 2012 with the 8.0, which puts 2005–2008 A8s on two lists at once.

A5, Q5, A7 and the Q7

The B8 line carries the A5 and S5 (8T) and the Q5 (8R) with the Bosch 8.0. The 9.0 line groups the B9 A4, A4 allroad and A5 with the C7 A6 and A7, the FY Q5 and the 4M Q7. Not every Audi is Bosch: the A3, the TT and the Q7 (4L) are on Continental (ATE) lines in our data, which the VW and Audi MK60 guide covers.

What comes off the car

Each Bosch unit here is an aluminum valve block with the pump motor on it and the electronic control unit fixed to the block, in the engine bay where the brake lines from the master cylinder run. On many Bosch units that control unit, the part scan tools call the ABS control module or ABS ECU, unbolts from the block, and it is what comes to the bench.

Symptoms of a failing ABS module on the Audi A4, A6, A5 and Q5

The amber ABS lamp comes first. On the B8 and C6 lines, which our data lists with stability control, the ESP or traction lamp lights beside it, and the C6 notes add brake-pressure-sensor and wheel-speed-sensor faults.

Loss of communication is listed for the 5.7, the B8 and C6 8.0 units and the 9.0: the lamps come on, the scan tool cannot open the ABS address and the other modules record that the ABS unit went quiet. Pump or solenoid failures, on file for the 5.7 and the B8, usually appear as stored codes rather than anything you feel, though a pump that never makes its brief self-test buzz after the car moves off, or one that keeps running, is worth noting.

On the 9.0 the faults on file are C123EF0, invalid data from the module and an open valve supply circuit. Faults like these often come and go with temperature or a rough road at first. With the lamps on the base brakes still work, but anti-lock and stability control are off, so a hard stop on a wet road can lock the wheels.

The fault codes you will see

Three code numbers are on file for these Bosch lines, in two styles: five digits on the B8 and C6 lines and seven characters on the 2016–2020 line:

Code Meaning What it points to
01418 Switch valve 1 (B8 A4, S4, A5, Q5 and C6 A6 lines, Bosch 8.0) The control unit's driver stage for that valve, or the circuit to its coil
01421 High pressure valve 2 (the same two lines) Another valve circuit in the same unit; two valve codes at once point at what the valves share inside the control unit
C123EF0 Hydraulic Brake Booster Limit Value Reached (Bosch 9.0, 2016–2020 line) Listed among the 9.0's failures; rule out the voltage and connector causes below first

The other faults on file carry no code number: lost communication with the ABS module, invalid data received from it, wheel-speed-sensor faults, brake-pressure-sensor faults and, on the 9.0, an open ABS valve supply voltage circuit. Your scan tool prints a number and a text for each, so compare the text with this list.

When the scan tool cannot reach the ABS module

No communication is its own case. Other modules store a lost-communication fault while the ABS address answers nothing, and the cause is the control unit, its supply or the network wiring. With the key on, meter the ABS connector for battery voltage and a sound ground; a unit with both that still says nothing, once the network wiring checks out, has failed.

Why these modules fail

For the 5.7 on 2002–2005 cars and the 8.0 on the B8, the notes name loss of communication, pump or solenoid failures and wheel-speed-sensor issues; the B8 and C6 notes add brake-pressure-sensor codes, and the 9.0 notes add C123EF0, invalid data and the open valve supply circuit.

Most of that points into the control unit. Its board carries the power supply, the processor and the driver stages that switch the pump motor and each valve. When a driver stage or its joint to the motor and coil pins gives way, the unit stores a pump or valve code; when the supply or processor section fails, it goes silent or sends data the car rejects. Years of heat cycles and engine-bay vibration work on those joints until one opens.

Some faults on the same lists are not the control unit:

  • A wheel-speed code on one wheel is usually that wheel's sensor, wiring or tone ring; codes on several wheels at once point back at the unit.
  • The pump motor can wear or seize on its own and set pump codes with a healthy control unit in front of it.
  • A valve stuck inside the aluminum block is a hydraulic fault that no electronic repair frees.

Check these before you condemn the module

Eight checks, none of which opens a brake line, can save you a shipment.

  1. Battery and charging. Measure the battery at rest and with the engine running; low voltage can make ABS units store faults unrelated to their electronics. Charge or replace a weak battery, clear the codes and drive before going further.
  2. Fuses. Check the ABS pump and control-unit fuses at the positions your owner's manual gives. A blown pump fuse is a lead, not a verdict: replace it once and see whether it holds.
  3. Grounds. Clean the battery-to-body and engine-to-body grounds, and any ground point near the ABS unit, to bare metal.
  4. The connector. Battery disconnected, release the lock, unplug the ABS connector and look for green corrosion, water, pushed-back pins or a cracked latch.
  5. Wheel-speed live data. Graph all four speeds on a slow drive. One wheel dropping out is that corner's sensor, wiring or ring; four clean traces beside a valve, pump or communication fault send you back to the unit.
  6. The communication test. If the ABS address will not answer, back-probe power and ground at the connector with the key on; voltage present with no response points to the control unit.
  7. C123EF0 on the 9.0. The code names the brake booster function, so read the fault memory of every module, not only the ABS, before you send the unit.
  8. Coding. If a used unit went in recently, compare its coding with the original's before you blame its hardware.

Take the car to a shop if the pedal feels different, fluid weeps at the unit or the red brake warning stays on.

Repair, refurbished, used or new: what each really costs

Every Audi line here is priced the same, whether the unit is a 5.3, 5.7, 8.0 or 9.0. These are starting prices; should the bench turn up more than the service includes, you see that cost before any of it is done, and it waits for your yes.

Choice Starts at What you get What the car needs after
Repair of your control unit $499 Your own unit, repaired at component level and retested, coding intact; 1-year warranty included Refit, clear codes and a test drive; a bleed if a line was opened
Refurbished unit with your data $950 A unit of the same Bosch family loaded with your Audi's coding; your original stays with us as the core, and there is no separate core charge; 1-year warranty included Refit and clear codes
Used unit No price on file A unit coded to another car, history unknown; match the full label number, not just the prefix Coding to your car with a capable scan tool or at a dealer
New unit from Audi No dealer list price on file for these lines A new unit Ask the installer whether it needs programming and what that costs

You pick the return speed at checkout: standard delivery at $29.95, which takes 3–5 business days, a UPS 2nd Day Air return at $54.95 or an overnight UPS return at $94.95. The label that brings the unit to us is already paid for, and $55 more makes it UPS 2nd Day Air. Bench time is about a week, and rush repair (+$100) shortens it to 2–3 business days. The 1-year warranty on our work comes with every repair and every refurbished unit, and the warranty page lists what it does not cover.

There is no advance exchange: we build a refurbished Audi unit from the data in your original, so the original must be here first. If the bench finds your unit past repair, it stops and you hear the options: a refurbished unit with your data, from $950, with what you paid counted toward it, or your unit back with the repair price refunded minus shipping and a $150 bench evaluation fee. Order the Bosch 8 repair for the B6, B7, B8 and C6 lines, the Bosch 9 repair for the 2016–2020 line or the Bosch 5.3 repair for the B5 line, or request a quote with a label photo if you are unsure.

Removing and shipping the module

On these Bosch units the control unit is the part to send, and on many of them it unbolts from the hydraulic block with the brake lines left in place. Park with the ignition off and the key out.

  1. Disconnect the battery negative cable and wait a few minutes.
  2. Photograph every label: the Audi number (907 379 for the control unit, or 998 375 on the 5.3; 614 517 for the hydraulic unit) and the ten-digit Bosch number on its white label.
  3. Release the connector lock, unplug the harness and tuck the plug somewhere dry.
  4. Remove the screws holding the control unit to the block and lift it straight off, without prying against the aluminum.
  5. Tape a clean bag over the exposed face of the block.
  6. If the control unit will not separate cleanly, stop and send photos through the quote form. If the whole unit must come out, tag each line to its port, cap the ports, plug the lines and plan a scan-tool bleed for the refit.
  7. Bag the control unit, shield the connector so no pin bends, box it with at least 2 inches of padding on every side, write your RMA on the box and use the prepaid label from your order email.

The mail-in instructions show the packing step by step. Brakes are a safety system: if a line has to be opened and you have never bled an ABS unit, let a shop do the removal and the refit.

What happens at the bench

Your Audi's control unit is logged against its RMA, its labels photographed and its numbers read, then powered on the bench so its stored data and fault memory can be read out. The pump-motor and valve driver circuits run under load, which is where a weak driver stage or an open joint shows itself, and the fault is repaired at component level before the full test runs again. It ships back with the coding it arrived with; if it proves beyond repair, work stops and we contact you with the choices first, as the how it works page explains.

After it is back in the car

On the Audi, line the control unit up with the block, run its screws in evenly, plug the connector until the lock clicks and reconnect the battery. If the hydraulic unit came out, bleed it with the scan tool's ABS routine. Clear the fault memory in the ABS module and in every module that logged lost communication, then drive so the system completes its checks.

A repaired unit keeps its coding, and a refurbished one arrives carrying yours, so neither has to be coded to the car again. Installation follows Audi's own steps. Some vehicles still need a brake bleed, initialization or calibration after install; for your model, Audi's repair information says which.

Part numbers for the Audi A4, A6, A5 and Q5

Type the number from your label into the part-number lookup, spaces or not; it matches from the start of the number, so an unfamiliar suffix still lands on the right line. Audi prints a prefix, a group, a base and a suffix, which makes 8K0614517AL and 8K0 614 517 AL the same part.

Part number Line Note
8E0 998 375 G B5 A4 / S4, early C5 A6, D2 A8 (Bosch 5.3) Audi control-unit number in the 998 375 series
0 273 004 358 Same line The Bosch number on the 5.3
0 265 950 080, 0 265 950 011 B6 / B7 A4, 2002–2004 C5 A6, D3 A8 Bosch numbers on the line listed as 5.7
0 265 950 012, 0 265 950 079 Same line Bosch numbers
8K0614517AL, 8K0614517BP B8 A4 / S4, A5 / S5, Q5 (Bosch 8.0) 614 517 series: the hydraulic unit
8K0907379CA, 8K0907379AA Same line 907 379 series: the control unit
8R0 907 379 C Q5 (8R) Control unit; listed with the 2009–2012 Q5
4F0614517L03, 4F0614517L04 C6 A6 / S6 and A8 (Bosch 8.0) 614 517 series
4F0910517L009, 4F0910517P007 Same line 910 517 series numbers on file for the C6
8W0-614-517-J-BEF, 8W0-614-517-AT-BEF 2016–2020 line (Bosch 9.0) Module label numbers 8W0907379 E, F, G, K or R
80A-614-517-B-BEF Same line Module label numbers 80A907379 AB, B, J or S
4M0-614-517-AA-BEF, 4M6-614-517-AD-BEF Same line Module labels 4M0907379 R, T or Q, and 4M6907379 AC, AF, BB or N

Also on file: 0265236098 and 0265950958 for the B8, 4F0 614 517 AA and 0265951536 for the C6, and 4G0-614-517-AK-BEF (label 4G0907379 S) for the 9.0 line. Where our data gives the model code, the number's first characters echo it, 8R0 for the 8R Q5, 4G0 for the 4G A6 and A7, 80A for the FY Q5 and 4M0 or 4M6 for the 4M Q7; treat that as a first check only, since the full label number is what has to match.

FAQ

How much does an Audi ABS module repair cost?

An Audi ABS module repair starts at $499 for any of the Bosch 5.3, 5.7, 8.0 or 9.0 units in this guide, plus return shipping from $29.95. A refurbished unit with your Audi's coding cloned onto it starts at $950. Both are starting prices, and extra work is quoted before it is done.

Can an Audi ABS module be repaired instead of replaced?

A repair is the first option for the Bosch control unit on an A4, A6, A5 or Q5, because the failures on file point to its driver circuits, power supply and communication. Repairing your own unit keeps its coding, so it does not have to be coded again.

Which ABS unit does my Audi A6 C5 have?

The early C5 A6 is listed with the B5 A4 on a Bosch 5.3, and the 2002–2004 A6, S6 and RS6 with the B6 and B7 A4 on a Bosch 5.7. A 2002 or 2003 A6 can fall on either list, so photograph the module label before you order.

Is the 2005–2008 Audi A4 B7 a Bosch 5.7 or a Bosch 8.0?

The B7 A4 is listed under both: its line is on file as a Bosch 5.7, with the B7 also listed under Bosch 8.0 from 2005. The catalog sells the line in the Bosch 8 family at the same starting prices as the 5.7, so send a photo of the full label with the order.

What does C123EF0 mean on an Audi?

C123EF0 is Hydraulic Brake Booster Limit Value Reached, on file for the Bosch 9.0 unit on the 2016–2020 A4, A4 allroad, A5, A6, A7, Q5 and Q7. It is listed among that unit's failures with lost communication, invalid data and an open valve supply circuit. Check battery voltage, the connector and the other modules' codes before you send the unit.

What do codes 01418 and 01421 mean on an Audi?

01418 is Switch valve 1 and 01421 is High pressure valve 2, both on file for the Bosch 8.0 on the B8 A4, S4, A5 and Q5 and the C6 A6. Each names a valve circuit inside the ABS unit, so once voltage and the connector check out, 01418 and 01421 point to the control unit.

Does a replacement Audi ABS module need coding?

A repaired Audi ABS module keeps its own coding. A refurbished unit from us carries your car's coding, cloned from your original before it ships, which is why the original has to arrive first. For a used or new unit, ask the installer whether it needs coding or programming and what that costs.

Is it safe to drive an Audi with the ABS and ESP lights on?

An Audi with the ABS and ESP lamps lit still has its base brakes, but anti-lock and stability control are off and the wheels can lock in a hard stop. Drive gently and have the codes read soon, and park the car if the red brake warning comes on or the pedal goes soft.

What warranty comes with an Audi ABS module repair?

Every Audi repair and refurbished unit from us carries a 1-year warranty on our work from its ship date, at no added cost. The warranty page lists the exclusions, such as sensors, wiring and damage from outside the module.

Sources

  • The unit names, failure notes, code meanings and part numbers for these five Audi lines come from this site's vehicle data, and each fact appears line by line on the Audi vehicle pages.
  • Prices, turnaround, return shipping and the 1-year warranty are this site's own terms, set out on how it works and the warranty page.