ABS Module Lab

Silverado, Sierra and Tahoe EBCM Repair Guide (2007–2019)

ABS Module Lab Team · · 17 min read

Which EBCM your 2007–2019 Silverado, Sierra, Tahoe or Suburban has, what its codes mean, what repair, refurbished and new cost, and how to ship it.

A gloved hand pressing the latch of a wiring connector under the hood of a truck, among braided hoses and engine covers in morning light.

A 2007–2019 Silverado, Sierra, Tahoe, Suburban, Yukon or Escalade carries one of three electronic brake control modules (EBCMs): a Bosch 8.0 on the 2007–2014 GMT900 half-tons and SUVs, a TRW EBC-345 or EBC-440 on the 2007–2014 heavy-duty trucks, and a unit our data does not name on the 2014–2019 K2 trucks. We repair any of them from $499 or supply a refurbished unit with your truck's data from $950, but a K2 labeled 84256780 or 85698746 lists new at $449.41 or $640.93, so read the label before choosing. Then pull the codes with a scan tool that opens the EBCM, because wheel-speed codes and module codes lead to different repairs.

Which Silverado, Sierra, Tahoe and Suburban trucks have this ABS unit

Three lines cover these years, each with its own vehicle page and service.

Line Years Models on the line Unit on file What comes off
GMT900 half-ton trucks and SUVs 2007–2014 Silverado 1500, Sierra 1500, Tahoe, Suburban 1500, Yukon and Yukon XL 1500, Avalanche, Escalade Bosch 8.0 The control unit, which unbolts from the block on many units
GMT900 heavy-duty trucks 2007–2014 Silverado 2500HD / 3500HD, Sierra 2500HD / 3500HD, Suburban 2500 TRW EBC-345 without RPO JL4; EBC-440 with JL4 Active Brake Control The module alone; it separates from the valve body
K2 trucks and SUVs 2014–2019 Silverado 1500, Sierra 1500, Tahoe, Suburban 1500, Yukon and Yukon XL, Escalade, Silverado / Sierra 2500HD / 3500HD (2015–2019), Suburban 3500HD Not named in our data Decided from a photo of your unit

The generations overlap in 2014. GM files the 2014–2016 Silverado 1500 under K2 numbers such as 84778358, while kit 20896914 still covers the 2009–2014 Tahoe and Suburban half-tons, so a 2014 truck is identified by its module number rather than its model year.

The half-ton Bosch 8.0 belongs to our Bosch ABS / ESP 8 family: pump, valve block and control unit in one hydraulic assembly, with the control unit coming away from the block on many units. GM sells the module alone as a kit, and the complete assembly also turns up under supplier numbers such as 0265951331.

The heavy-duty trucks use a TRW module bolted to the brake pressure modulator valve, our TRW EBC family. Option code JL4, Active Brake Control, decides which one: the EBC-345 without it, the EBC-440 with it. The RPO list is on the Service Parts Identification label, usually inside the glove box door, and either module unbolts and travels alone.

No source in our data names the K2 supplier unit, so those trucks sit under no unit family, get the any-make repair at the same starting price, and are identified from the label. On all of them the unit sits where the steel lines from the master cylinder run in.

Symptoms of a failing ABS module on the Silverado, Sierra and Tahoe

On all three lines a failing EBCM first shows as the amber ABS lamp, the traction control and StabiliTrak warnings where fitted, and anti-lock braking switched off. Ordinary braking remains, since the hydraulic unit lets pedal pressure reach the wheels whenever its module is out of action.

  • GMT900 half-tons, 2007–2014. A 2011 Sierra 1500 on file ran its ABS pump nonstop with the truck switched off and stored C0110. A pump that runs with the key out can be heard after shutdown and can drain the battery overnight. U0121 logged by the other modules is the other module-side pattern on file.
  • GMT900 heavy-duty, 2007–2014. The TRW faults on file are a module that stops communicating, a pump that stays on, on-and-off operation and pump codes, plus the internal fault C0550. An intermittent fault can come and go with temperature or rough pavement before it stays on.
  • K2, 2014–2019. The reported module faults are no communication, every ABS warning light on at once, a dead speedometer, an ABS pump that does not run, and wheel-speed sensor codes. On vehicles that build road speed from wheel-speed data the brake module processes, a module that drops off the network can take the speedometer with it.

A red BRAKE warning, a sinking pedal or a falling fluid level can mean a hydraulic problem: have it checked before driving.

The fault codes you will see

A reader that talks only to the engine computer shows none of these; the tool has to open the EBCM.

Code Meaning What it points to Line
C0110 Pump motor circuit malfunction The module's motor driver, the motor or its feed GMT900 half-tons
U0121 Lost communication with the ABS control module Logged by other modules: power, ground, network wiring or the EBCM GMT900 half-tons
C0035 Left front wheel speed sensor fault The sensor, its lead or the ring it reads GMT900 half-tons, K2
C0040 Right front wheel speed sensor fault As C0035, right front GMT900 half-tons, K2
C0045 Left rear wheel speed sensor fault As C0035, left rear GMT900 half-tons, K2
C0050 Right rear wheel speed sensor fault As C0035, right rear GMT900 half-tons, K2
C0550 Electronic control unit performance (GM's standard definition) The module reporting a fault of its own GMT900 heavy-duty
C0201 Listed for these trucks as an ABS / ESC module fault The module, confirmed on the bench GMT900 heavy-duty
C056D Control unit internal fault The module K2

One wheel-speed code names one corner, so start there. The same codes on several wheels at once, or a wheel-speed code beside C0550 or C056D, can point back toward the module that every channel passes through.

If the tool cannot open the EBCM at all, the other modules log U0121 and the brake warnings come on. A blown fuse, a corroded ground or a pin backed out of its connector paints the same picture, so no communication, a listed failure on the heavy-duty and K2 trucks, becomes a bench job only after power, ground and the network wiring are proven at the connector.

Why these modules fail

An EBCM switches heavy current: it runs the pump motor, fires the solenoid valves and reads four wheel-speed signals from a spot that road spray, heat and vibration reach for years. Wear tends to show in the high-current stages and their solder joints. The faults on file fit: a half-ton pump that would not stop, with C0110, points at the motor driver holding the motor on; the stuck pump and pump codes on the TRW modules involve the same circuit; C0550 and C056D are the module reporting a fault of its own.

What shares the lamps but gets fixed on the truck:

  • Wheel-speed sensors and their rings. A damaged sensor tip, a cracked or rusted ring, or a chafed lead sets one of the C0035–C0050 codes.
  • Harness and connectors. Frame-rail wiring takes salt and water, and a corroded pin can mimic an internal fault.
  • The pump motor. Where the module comes off the block, the motor stays on the truck, and a seized motor is not a module repair.
  • Valves in the block. A sticking valve changes pedal feel or drags a wheel; electronics work does not reach it.

Check these before you condemn the module

None of these needs a part, and any one can save a shipment.

  1. Record before you clear. Save the codes and any freeze-frame data the tool shows, then clear and drive; a code that returns at once says more than one that took a week.
  2. Battery and charging. Load-test a charged battery and read charging voltage with the engine running. Low system voltage can make an EBCM set codes and drop off the network.
  3. Fuses. The EBCM has a high-current pump feed and a separate module feed in the underhood block; test both sides of each with a test light, since a cracked fuse can look whole.
  4. A pump that will not stop. Pull the ABS pump fuse until the truck is diagnosed. Base brakes work without it; ABS, traction control and StabiliTrak do not.
  5. Grounds and the connector. Battery off, unplug the module and look for water, green corrosion and pins pushed back into the shell. Clean the ground point to bare metal and voltage-drop test it with the pump commanded on.
  6. Wheel-speed live data. Graph all four wheels on a slow drive; a channel that drops to zero or jumps names its corner, so inspect that sensor, lead and ring first.
  7. The communication test. If the tool gets no answer, measure the battery feed, ignition feed and ground at the EBCM connector; with all three good and still no answer, the module is the suspect.

Call in a mechanic if the pedal has changed, the red BRAKE lamp is lit, fluid is low, the lamps followed a collision or a flood, or the job means lying under a truck on stands. The order form asks what your scan tool shows (trouble codes, no ABS codes, or no connection) and what the truck is doing, so note both.

Repair, refurbished, used or new: what each really costs

Our prices are starting prices. Should the bench find work beyond the service, the cost comes to you for a yes or no before anything is done.

Option Price What you get After install
Our repair (Bosch 8.0, TRW EBC-345 / EBC-440, or the any-make repair for a K2) From $499 Your own module repaired at component level and retested, coding intact Clear codes, drive
Refurbished unit carrying your data From $950 A bench-tested unit of the same family, your VIN coding and configuration cloned from your original, which stays with us as the core (no separate core charge) Clear codes, drive
Used unit Varies No history, still coded to the truck it came from Ask the installer what setup it needs
New GM 84256780 (K2 half-tons 2017–2019, SUVs 2017–2020) $449.41 list A new module Check with the installer on programming and its cost
New GM 85698746 (K2 2500 / 3500, 2017–2019) $640.93 list A new module The same check

When a new GM module is the better buy

Plainly: 84256780 lists at $449.41, below our $499 repair, and 85698746 at $640.93, above the repair but well below a $950 refurbished unit. For a truck carrying either number, the real choice is between our repair and the new part plus any setup it needs.

New wins when a dealer has the part, your installer has quoted any setup it needs, and that total beats our repair plus return shipping. It is also the likely answer for a flooded, burned or cracked module, which may leave too little to repair. Our repair makes more sense when the new part is back-ordered, when the setup charge tips the balance, or when your label shows a K2 number with no price on file; the repaired module goes back in with its own coding and carries the 1-year warranty.

List prices are catalog prices on the day our data was read, not quotes. The catalog shows 84256780 superseded by 85698743, so ask for the current number and price with your VIN; our replacement-cost guide has dealer list prices for other models.

The return trip is priced by speed when you order: $29.95 standard (three to five business days), $54.95 two-day UPS or $94.95 overnight UPS. Our own label brings the EBCM in by USPS ground at no charge, or by two-day UPS for +$55.

Expect about a week on the bench; paying +$100 for rush repair shortens that to 2–3 business days. A 1-year warranty is included on every repair and refurbished unit, as the warranty page explains.

A module the bench finds past repair waits for your decision: a refurbished unit for the difference from what you paid, confirmed with you first, or your own module returned and the repair price refunded, less the shipping and a $150 bench evaluation fee. There is no advance exchange, since a refurbished unit is written with data read out of your original.

Order the half-ton job as Bosch 8 repair, the heavy-duty job as TRW EBC repair and a K2 as the any-make ABS repair. An unreadable label calls for request a quote with a photo first, and the Bosch ABS / ESP 8 page lists other vehicles sharing the half-ton unit.

Removing and shipping the module

Brakes are a safety system: if a step is unfamiliar, let a shop remove the unit, and never drive the truck with a brake line open.

  1. Order first. The RMA number arrives by email, and the prepaid label follows once payment clears.
  2. Photograph the label in place. Its numbers are what the bench matches to your order, and on a K2 they decide what you have.
  3. Disconnect the battery. Negative cable off, key out, before the module connector is touched.
  4. Clean the unit. Grime on its surface drops into the joint between module and block as they separate.
  5. Release the connector. Open its lock all the way first; prying it off breaks the lock and bends pins.
  6. Heavy-duty: unbolt the TRW module. The modulator valve stays on the truck with its lines attached; bag its face to keep dirt out.
  7. Half-ton: lift the control unit off the block where it separates. The lines stay put, so the removal itself calls for no bleed. If it will not come away, stop and send us a photo before opening anything.
  8. K2: send a photo first. We will say whether the module ships alone or the assembly comes out; if the hydraulic unit comes out, cap each port as its line comes off and keep the unit upright.
  9. Pack and label. Bag the module, surround it with two inches or more of foam or bubble wrap in a sturdy carton, put the RMA outside and on a slip inside, and tape on the prepaid label. Our mail-in instructions show each step.

What happens at the bench

Your module is matched to its RMA and its label photographed, then powered on the bench: its fault memory and stored data are read and its pump-motor and valve circuits are driven under load, which is where a tired driver shows itself. We repair the fault at component level on your own board, repeat the load test and ship it back with its coding untouched, while a module past repair halts the work until you decide. The stages are set out on how it works.

After it is back in the car

Bolt the module back on squarely with even torque on its screws, latch the connector until it clicks, and reconnect the battery. Clear the codes and drive above walking pace so the EBCM sees all four wheels; the lamps should go out on that first drive. On a half-ton that had the running-pump fault, listen for a silent pump after shutdown, and on a K2 that lost its speedometer, watch the needle move.

Removing a module without opening a line does not by itself call for a bleed, while a hydraulic unit that came out needs a full one, with the scan tool running the ABS bleed wherever GM's procedure calls for that sequence. Some vehicles still need a brake bleed, initialization or calibration after install. Whoever fits a new dealer module should say whether it needs programming, and at what cost. If a lamp returns after a normal drive, record the code and the moment it set, and talk to us before the module comes out again.

Part numbers for the Silverado, Sierra and Tahoe

Enter the number from your label in the part-number lookup to see its line, unit and service. GM catalog notes, except where a supplier number is given:

Part number Note
25871210 Electronic Brake And Traction Control Module Kit, 2007–2009 Silverado half-ton (4.3L–6.2L)
20896914 Same kit, 2009–2013 Silverado half-ton; 2009–2014 Tahoe and Suburban half-ton
15905737 Electronic Brake Control Module Kit, 2007 Tahoe and Suburban half-ton
0265951331 Silverado 4.8L–6.2L ABS pump and control module assembly, 2007–2013 (supplier number)
25802182 Silverado 1500 4.3L pump and module assembly; supplier number 0265950574
84778358 EBCM assembly with brake pressure modulator, 2014–2016 Silverado 1500 (4.3L/5.3L/6.2L)
23380704 Electronic Brake Control Module Kit, 2014–2016 Silverado 1500/2500/3500; 2015–2016 Tahoe/Suburban 1500
84256780 EBCM assembly with brake pressure modulator, 2017–2019 Silverado/Sierra 1500, 2017–2020 Escalade/Suburban/Tahoe/Yukon; superseded by 85698743
84256781 EBCM assembly, 2017–2019 Silverado 1500/2500/3500; 2017–2020 Tahoe/Suburban 1500
84609555 EBCM assembly with brake pressure modulator, 2017–2020 Tahoe/Suburban 1500
84609554 EBCM assembly with brake pressure modulator, 2017–2019 Silverado 2500/3500 (6.0L/6.6L Diesel); 2017–2019 Suburban 3500
85698746 EBCM assembly with brake pressure modulator valve, 2017–2019 Silverado/Sierra 2500/3500 and Suburban 3500 (6.0L, 6.0L Flex, 6.6L Diesel)

Also on file: 25802180, a Silverado 1500 4.3L assembly with supplier number 0265950575, and 84256785, a further EBCM number for the Silverado 1500, Tahoe and Suburban. The heavy-duty TRW numbers have no fitment notes. With the EBC-345: 25802683, 15233173, 25802684, 19436351, 15858814, 25802685, 15233172, 25802686, 15858819, 20927950, 20927951, 19436355, 22858869 and 22858868. With the EBC-440: 20910214, 25779780, 20980215, 22761034, 19435399, 22761033, 20910215 and 25853666; 20980215 and 20910215 differ by one digit and one may be a misprint, so trust your own label.

The 1999–2006 trucks and SUVs use a different module, covered in our Kelsey-Hayes 325 guide.

FAQ

How much does it cost to repair a Silverado EBCM?

Repairing the EBCM from a 2007–2019 Silverado, Sierra or Tahoe costs from $499 here, and a refurbished unit carrying your truck's cloned data costs from $950. Return shipping, from $29.95, is added at checkout. Both are starting prices; extra work is quoted and approved before it is done.

Is a new GM EBCM cheaper than a repaired one?

For one K2 number, yes: the GM parts catalog lists 84256780 at $449.41, below our $499 repair, and 85698746 at $640.93, above the repair but below the $950 refurbished price. Add the installer's charge for any setup a new module needs before comparing it with a repair.

What does C056D mean on a Silverado or Tahoe?

On a 2014–2019 K2 Silverado, Sierra, Tahoe or Suburban, C056D is a control unit internal fault: the EBCM reporting a failure inside itself. Record it, clear it and see whether it returns. A C056D that comes straight back with good power and ground at the connector points to a module repair.

Does a Silverado EBCM need programming after it is replaced?

A repaired Silverado EBCM returns with the coding it left with, and a refurbished unit has your truck's data cloned onto it before it ships; after either, follow GM's procedure for any setup the scan tool asks for. A new dealer module is the installer's question, including what any programming costs. The lab does no programming and no work on the truck.

Can I drive my Silverado with the ABS and StabiliTrak lights on?

With the module in place and no brake line open, a Silverado or Sierra showing these lamps keeps its base brakes but loses anti-lock, traction and stability assistance, so drive gently and get it fixed soon. If the red BRAKE lamp is on, the pedal has changed or the fluid is low, park it.

Why does the ABS pump keep running on my Sierra after I shut it off?

A pump that runs with the truck off is a GMT900 half-ton failure on file: a 2011 Sierra 1500 did it with C0110, the pump motor circuit code, stored. Pull the ABS pump fuse to stop the battery drain while you diagnose. C0110 can mean the module's motor driver or the motor itself; the bench load-tests the driver, and a driver that passes points back at the motor.

Where can I get a GM EBCM repaired near me?

ABS Module Lab is mail-in only: the prepaid label turns any counter of its carrier in the US into the drop-off. Allow for transit to Arlington, Texas, about a week on the bench and the trip home. A local shop can do the removal and refit if you would rather not.

What if my EBCM cannot be repaired?

An EBCM found past repair stops the work until you decide. You can take a refurbished unit of the same family with your truck's data cloned onto it, paying the difference once we confirm it, or get your module back with the repair price refunded, less shipping and a $150 bench evaluation fee. Your original becomes our core only if a refurbished unit is made from it.

What warranty comes with an EBCM repair?

One year on our work: a Silverado, Sierra or Tahoe EBCM repair or refurbished unit carries a 1-year warranty from the day it leaves Arlington, at no added charge. No other warranty exists here, and its scope is the module work itself, not the truck's sensors, harness or hydraulic unit.

Sources