ABS Module Lab

Dodge Grand Caravan and Town & Country ABS Module Failure Guide

ABS Module Lab Team · · 17 min read

Why a 2008–2020 Grand Caravan or Town & Country sets C2200, C2116 or U0121, what to check this week, and what repair, refurbished or new really costs.

A silver minivan in a driveway at dusk with its sliding door open and two children in car seats inside, a parent standing beside it checking a phone.

On a 2008–2020 Dodge Grand Caravan or Chrysler Town & Country, ABS and traction-control lamps lit together mean the ABS module has logged a fault: C2200 or C2200-49 says the module has failed inside, while C2100, C2101, C2116 and C2216 send you to the battery, charging system and pump supply first. Repairing the van's own module costs from $499 plus return shipping, a refurbished module carrying your van's data costs from $950, and the Mopar parts catalog listed the new 2008/2010 module, 68030938AA, at $751.30. This week, have the codes read from the ABS module itself, load-test the battery, and photograph the label on the unit.

Which Grand Caravan and Town & Country vans have this ABS unit

Both vans share one vehicle line on this site: the RT-platform Dodge Grand Caravan and Chrysler Town & Country, 2008–2020. The Mopar numbers on file run through the 2020 Grand Caravan and, for the Town & Country, through 2016, with the 3.3L to 4.0L engines on the early vans and the 3.6L from 2011. The Chrysler 300, Charger and Challenger of the same years are a separate line with their own ABS module guide.

Which unit, and why the label matters. No source on file names the supplier or the type of ABS unit in these vans, so the site does not file them under a named unit family. They get the any-make ABS module repair, from $499 like most units on the ABS repair pricing page, and the unit is identified from its label once it reaches the bench. Mopar's part numbers also change series in 2009, 2011, 2012 and 2013, one more reason to read the label rather than go by the model year.

Stability control is part of it. The line has electronic stability control, and the ABS module runs it along with anti-lock and traction control. That is why one failing module lights several lamps at once, and why the stability warnings stay on until the ABS fault is cleared.

Module or whole unit. On several years the catalog lists a part it calls the module beside one it calls the hydraulic assembly or the control unit, so your label number tells you which piece you have, and that decides what ships.

Symptoms of a failing ABS module on the Grand Caravan and Town & Country

The lamps. A steady ABS lamp with the traction or stability lamp beside it, and a brake pedal that feels normal, is what a module fault looks like from the driver's seat. The van still stops on its base brakes; the anti-lock, traction and stability help is what has gone.

Braking on its own. One report on file deserves attention: a 2011 Grand Caravan at about 170,000 miles stored C2200 while the ABS electronics applied the brakes, on and off, in city driving. A van that brakes when nobody pressed the pedal can startle its driver or be hit from behind. If yours does it, park it until it has been inspected.

Lamps that come and go. A warning that appears after a long drive on a hot day and is gone after a night parked, or one that follows potholes, fits a fault inside the module or in a connection near it.

Lamps after a battery problem. Warnings that arrived after a jump start, a dead battery or alternator work point at voltage first: a module that sees its supply out of range logs C2100 or C2101 and can switch its functions off, much as it would for an internal failure.

The fault codes you will see

Read the codes from the ABS module itself: an engine-only reader may show nothing, or only a U0121 logged by another module. Save what the tool reports before clearing anything.

Code Meaning on file What to check first
C2200 Anti-lock brake module internal (the 2011 Grand Caravan report, with the module applying the brakes in town) The module itself, once battery voltage is proven good
C2200-49 Anti-lock brake module internal fault The same fault as C2200, shown with the -49 suffix that some tools display
U0121 Lost communication with ABS module Fuses, ground and the connector at the ABS module
C2116 ABS pump motor supply low voltage Battery, pump fuse and feed, ground, then the module's pump stage
C2216 ABS pump motor supply low voltage The same checks as C2116
C2100 Battery (supply) voltage low Battery, cable ends and charging system
C2101 Battery voltage high Alternator output and its regulation
C2112 Sensor supply 1 voltage circuit high The sensor wiring the module powers, then the module's supply circuit

Voltage first. C2100 and C2101 describe the van's electrical supply, not the module, and C2112 points first at a sensor circuit the module feeds. C2116 and C2216 share one meaning on file and can start on either side of the module's connector, as the next section explains. Fix what the code names, clear it and drive for a few days; send the module when C2200 or C2200-49 returns, or a pump-supply code keeps coming back, with the voltage proven good.

When the tool cannot connect. No reply from the ABS module, with U0121 stored elsewhere, means the module is dead or is missing power, ground or its network link. Test the ABS fuses, the module's ground and the connector before deciding which; the guide to an ABS module that will not communicate sets out the order of tests. Power, ground and the network wires proven at the connector with still no answer puts the fault in the module.

Why these modules fail

Inside the module. C2200 and C2200-49 are the module's verdict on itself. On an ABS board, the parts that age with heat cycles and years of switching current are the solder joints at the connector and in the power stage, the drivers that fire the valves and the pump, and the module's internal power supply. A cracked joint can make contact at one temperature and lose it at another, which is one reason early faults come and go.

Brakes applied without a request. A module that applies the brakes by itself is either acting on a false input or has lost control of an output. A wheel-speed or stability sensor feeding it bad readings can provoke an intervention, so the sensors are checked first; when they read true and the van still brakes on its own, the module is the prime suspect.

Pump-supply faults. C2116 and C2216 are measurements, not verdicts: the module saw too little voltage on the pump motor's supply. A tired battery, a corroded ground, a loose fuse terminal and a pump motor drawing too much current can produce the same reading as a failing pump stage inside the module, which is why the bench runs the pump circuit under load before calling it.

What it is not. Wheel-speed sensors and the tone rings or magnetic encoders they read, the harness to each wheel, the pump motor, the valves in the hydraulic block and the base brakes all sit outside the module and can light the same lamps. A sensor code names a wheel; a hydraulic fault shows in the pedal, as a pull or as a dragging wheel.

Check these before you condemn the module

Most of these take an evening with ordinary tools, and any one of them can spare the family a week without the van.

  1. Load-test the battery. A battery that still cranks the engine can fail a load test, and a weak one can set C2100 and the pump-supply codes. If it fails, replace it before anything else.
  2. Read charging voltage. With the engine running and the headlights and blower on, a high reading points at the charging system's regulation and fits C2101; a low one points at the alternator, its belt or its cables.
  3. Test the ABS fuses. In the underhood power distribution center, check the pump fuse and the module fuse on both sides with a test light or meter, and look at the fuse terminals, since a loose or corroded one drops voltage under the pump's load.
  4. Clean the cable ends and grounds. Battery terminals, the engine-to-body ground and the module's own ground all matter, and a ground that looks clean can still lose voltage when the pump runs.
  5. Inspect the module connector. Battery disconnected, unplug it and look for corrosion, moisture and pins pushed back in their cavities.
  6. Watch the sensors in live data. Drive slowly with the tool showing all four wheel speeds, which should rise together. On a van that brakes by itself, also watch the steering angle and yaw readings, which should sit near zero when it is parked straight.
  7. Run the communication test. Key on, connect to the ABS module, and if it will not answer, check power and ground at its connector before blaming it.
  8. Let a shop take over when the brakes misbehave. If the van brakes by itself, the red BRAKE lamp is on, the pedal sinks or feels different, or the fluid level has dropped, a mechanic should look at the whole brake system first. The lab repairs the module; the van around it is the shop's work.

Repair, refurbished, used or new: what each really costs

Choice Price You get Needed after install
Repair of your module (any-make ABS module repair) From $499 Your own module, repaired at component level and tested, still carrying the van's coding Clear the codes and drive
Refurbished module with your van's data From $950 A refurbished unit of the same type as yours, written with the VIN, coding and configuration read from your original, which we then keep as the core at no separate charge The same steps as the repair
Used module Varies A module from another van, set up for that van, with no history Initialization to your van by a shop or dealer
New Mopar module $751.30 for 68030938AA (2008 and 2010 vans, 3.3L to 4.0L), the catalog price when read in October 2026 A new module, if the number is still sold Have the installer tell you whether programming is needed and what it will cost

Be clear-eyed about that last row: for a 2008 or 2010 van whose label reads 68030938AA, the new Mopar module lists for less than our refurbished unit. If your module proves past repair and that number is still sold, new can be the better buy: compare its price plus what the installer charges for any setup against $950. The list price is the catalog's on the day it was read, not a quote, and no new-module price is on file for the other years.

Our prices are starting prices: work the bench finds beyond your service is quoted, and nothing happens until you say yes. For the trip home you pick a speed at checkout, where $29.95 gets standard delivery in 3–5 business days, $54.95 gets UPS 2nd Day Air and $94.95 gets UPS Next Day Air. The label to us is included: a prepaid USPS ground label reaches your inbox after payment, or a UPS 2nd Day Air label if you add rush inbound for $55. Bench time is about a week as standard, or 2–3 business days with rush repair for +$100. Every repair and refurbished unit comes with a 1-year warranty that starts the day it ships back and costs nothing extra, and it is the only warranty there is; the warranty page explains what it includes.

If the module turns out to be unrepairable, the bench stops and you decide. You can take a refurbished unit carrying your data, paying whatever its price exceeds your earlier payment once we have confirmed that figure, or have the module come home and get the repair price back minus what shipping cost and a $150 bench evaluation fee. Nothing is sent to you ahead of your original, because the refurbished unit is written with data read out of it.

To go ahead, order the any-make ABS module repair. To have the unit and price confirmed first, send the label photo and your codes through request a quote, or compare services on the pricing page.

Removing and shipping the module

With no unit family on file, send a photo of the ABS unit and its label through the quote form if you are unsure what separates. The sequence:

  1. Order first. Wait for the RMA email and the prepaid label so the van is apart only as long as it must be, and line up other transport for the days the module is away.
  2. Power down. Key out, negative battery cable off, and a few minutes' wait before you touch the module connector.
  3. Photograph the label in place. Keep the picture; at check-in the bench reads the same number and matches the module to your RMA.
  4. Unplug the connector. Release its lock fully before pulling; forcing it breaks the housing.
  5. If the electronic module separates, remove its screws and lift it straight off the valve block. The block, its brake lines and the fluid stay in the van.
  6. If it does not separate, the whole unit has to come out, which means opening the brake lines, capping every port and line at once, and bleeding the system on reinstall. For most owners that is a shop job, and the van cannot be driven until it is done.
  7. Pack it. Seal the part in a bag, protect the connector, pad it two inches deep on every side of a sturdy box, mark the RMA outside and on a slip in the box, and tape the prepaid label on.

The mail-in instructions show the packing in more detail. With the module out and the lines closed the van keeps its base brakes, but it has no ABS, traction or stability control and its warning lamps stay lit, so park it if you can. With the lines open it does not move at all.

What happens at the bench

At the lab the box is matched to its RMA, the label is photographed and the part numbers are read; with no family on file for these vans, that check-in is also where the unit is identified. Next the module is powered up on our fixture, where we read what it has stored, including its fault memory, and drive the pump-motor and valve circuits under load. We repair the fault at component level, repeat the tests, and ship it at the return speed you picked with your van's coding still in it. The stages from order to delivery are on how it works, with an email at each one.

After it is back in the car

Fit the module back the way it came off, connector locked, battery reconnected last. Clear the codes in the ABS module and the U0121 entries in the other modules, then drive a few blocks at normal speed; the lamps should go out once the module has seen all four wheels turning and finished its checks.

If the hydraulic unit came out, the brakes must be bled before the van moves, ideally with a scan tool that cycles the ABS valves. A repaired module goes back with its own stored coding and a refurbished one arrives holding your van's data, yet some vehicles still need a brake bleed, initialization or calibration after install. With stability control on board, a sensor such as steering angle may call for one, and the scan tool should show it.

Part numbers for the Grand Caravan and Town & Country

Mopar's numbers for these vans run in series by model year, and the catalog wording tells you whether a number is the module or the larger assembly. Type the number from your label into the part-number lookup to see what is on file for it.

Part number Note on file
68030938AA "ABS Control Module", 2008 and 2010, 3.3L to 4.0L; $751.30 catalog price
68030939AA "ABS Control Module", 2008
68053288AA ABS module, 2009
68053288AB ABS module, 2010; replaced by 68053288AC
68053288AC Supersession of 68053288AA and 68053288AB
68089474AA ABS module, 2011, 3.6L
68140991AA ABS module, 2011 Town & Country, 3.6L
68128174AA "Anti-Lock Brake System Module", 2012, 3.6L
68128173AA "Anti-Lock Brake System Control", 2012, 3.6L
68194482AC "Anti-Lock Brake System Module", 2014, 3.6L
68194483AC "Anti-Lock Brake Control Unit", 2014–2018 Grand Caravan and 2014–2016 Town & Country
68194483AE "Anti-Lock Brake Control", 2013–2020 Grand Caravan

Five more numbers are on file: 68194482AA ("Anti-Lock Brake System Module", 2013), 68194483AA ("Abs Hydraulic Assembly", 2013), 68194483AD (listed with no year), and 68194482AB and 68194483AB, both tied to the 2012–2020 Grand Caravan. The 68194482 numbers carry the "Module" wording and the 68194483 numbers the assembly and control-unit wording, which is the split to check before you decide what comes out of the van.

FAQ

How much does a Dodge Grand Caravan ABS module repair cost?

A Dodge Grand Caravan or Town & Country ABS module repair costs from $499, plus return shipping from $29.95. A refurbished module carrying the van's data starts at $950, and the new Mopar module for 2008 and 2010 vans, 68030938AA, was $751.30 in the catalog. Extra work the bench finds is quoted before anything is done.

Why are the ABS and traction control lights on in my Grand Caravan?

The Grand Caravan's ABS module runs anti-lock, traction control and stability control, so when it logs a fault it switches them off and lights their lamps together. The stored code decides the next step: C2200 or C2200-49 points inside the module, while C2100, C2101, C2116 and C2216 send you to the battery, charging and pump supply first.

What does C2200 mean on a Grand Caravan or Town & Country?

C2200 is the anti-lock brake module's internal fault code, and some scan tools show it as C2200-49. On file it comes from a 2011 Grand Caravan whose ABS electronics were applying the brakes on their own in city driving. With the battery and charging voltage proven good, C2200 means the module needs repair.

My Town & Country brakes by itself in town. Is it the ABS module?

A Town & Country that brakes by itself can have a failing ABS module: braking on its own with C2200 stored is the report on file for a 2011 Grand Caravan, the Town & Country's twin. A wheel-speed or stability sensor sending false readings can do the same, so have a shop check the sensors and the brake system before the van is driven again; if the sensors read true, the module is the repair.

Can I drive my Grand Caravan with the ABS light on?

A Grand Caravan with only the ABS and traction lamps on still stops on its base brakes, but without anti-lock or stability help in a hard stop or on a wet road. Drive it gently and get the codes read this week. If the red BRAKE lamp is also on, the pedal has changed, or the van is braking by itself, stop driving it.

Is a used ABS module a good idea for a Grand Caravan?

A used Grand Caravan ABS module arrives set up for another van, has no history and needs initialization to yours, and a mismatched label number can leave the lamps on. If you do buy used, match the number exactly and budget for that setup; a repair or a refurbished unit from us comes back with your van's own data instead.

Does a repaired Grand Caravan ABS module need programming?

A repaired Grand Caravan or Town & Country module returns with its own stored coding, and a refurbished unit gets your van's data written in before it ships. After installing either one, clear the codes and run any initialization or calibration the scan tool asks for.

How long will my minivan be without its ABS module?

A Grand Caravan or Town & Country waits on roughly a week of bench time, with transit to the lab and back on top, or 2–3 business days of bench time when rush repair is added. If only the electronic module came off, the van keeps its base brakes in the meantime.

What if my Town & Country ABS module cannot be repaired?

An unrepairable Town & Country module halts the job until you choose. One option is a refurbished unit carrying the van's data, where you pay only what its price adds to your first payment; the other is your Town & Country module back with the repair price refunded minus shipping and a $150 bench evaluation fee. The included 1-year warranty covers a refurbished unit just as it covers a repair.

Sources