ABS Module Lab

Jeep Wrangler JK ABS/ESP Module Failure: Symptoms, C2200, Repair

ABS Module Lab Team · · updated · 17 min read

Why the 2007–2018 Jeep Wrangler JK ABS/ESP module fails, the codes it sets (C2200, C2116, U0121), what repair costs from $499 and how to remove and ship it.

Driver's view inside a boxy off-road SUV at dusk on a wet, snow-edged road, hands on the steering wheel, rain beads on the windshield and amber ABS warnings glowing on the instrument cluster

On the 2007–2018 Jeep Wrangler JK the anti-lock brakes and the electronic stability program share one Continental (ATE) MK61 unit, and when its control module fails the ABS, traction and ESP lamps come on together while the scan tool reports C2200, an internal module fault, or stops reaching the module at all. Repairing your own module starts at $499 plus return shipping and it comes back with the Jeep's coding on it; a refurbished unit with your data written in starts at $950. Read the codes, clean and inspect the module connector and photograph the label before you decide anything, because a share of JK "module failures" turn out to be connector and voltage problems.

Which Jeep Wranglers have this ABS unit

Every JK, two-door and Unlimited, from the 2007 launch through the last 2018 trucks, with the 3.8L V6 and, from 2012, the 3.6L. Stability control was new to the Wrangler with this generation, and the Unlimited carried electronic stability program as standard equipment. One module runs ABS, traction control and ESP, so one internal fault lights every one of those lamps.

Three independent listings in our files put the JK on a Continental (ATE) MK60-series unit, two of them naming the MK61, and the Mopar catalog supports the layout: it sells the electronic module ("Module-Anti-Lock Brake System") and the "Control Unit Anti-Lock Brake" assembly, which is the module together with its modulator and valve block, under separate part numbers. A part that is cataloged on its own is a part that comes off on its own. Nothing in our files names the unit for 2017–2018 specifically, but the module numbers for those two years (68259556AD and 68259556AE) continue the 2014–2016 series without a break, so we treat them as the same job and confirm from the label when the module arrives. The lab prices it as the ATE / Continental MK60 / MK61 family, the same family that serves the Dodge Journey and the 2010–2017 Equinox and Terrain. The vehicle page, with every sourced number and code, is Jeep Wrangler (JK) 2007–2018.

The unit lives under the hood where the brake lines from the master cylinder lead: an aluminum block with a pump motor on one face and a plastic control module with a wide multi-pin connector on another. The electronic module is what fails and what ships.

Other Wrangler generations

The 1997–2006 TJ used the earlier Teves Mark 20, a four-wheel non-integral system whose controller houses the control module and the solenoids on the valve body with the pump and motor; it has no stability control. Mopar lists the TJ module as 5073793AA (2001–2006) and the control unit as 52128487AA, and our files hold no TJ-specific failure mode or code, so the TJ is sold under the ATE / Continental MK20 family at Jeep Wrangler (TJ) 1997–2006. The 2018-on JL moved to a 38-pin Continental MK100, covered by the Continental MK100 family at Jeep Wrangler (JL) 2018–2020. The only JL ABS bulletins in our files are software updates on the 4xe plug-in hybrid, a configuration mismatch (C2206-00) after re-gearing past 4.5:1 and a hydraulic-unit performance code (C055F-00), neither of them a hardware failure, so a JL with an ABS lamp starts with a software check, not a module repair. One trap for 2018 owners: the catalog lists JK and JL numbers side by side for that year, and the JL numbers are the ones that name the 2.0L and 3.0L diesel engines.

Symptoms of a failing ABS module on the Wrangler JK

The pattern owners describe is three lamps at once. The amber ABS lamp, the traction-control lamp and the ESP lamp light on the same drive and stay on, and the stability system is off rather than merely complaining.

What the scan tool says separates the cases. C2200 or C2200-49 is the module reporting that its own self-test failed. U0121 in the engine or body module means the ABS module dropped off the network; often the tool cannot open a session with the ABS module at all. C2116 says the supply to the pump motor read low when the module tried to run it. C2100 and C2101 are the module seeing battery voltage below or above its limits, which is as often a charging or wiring problem as a module problem.

Intermittency is the JK's signature. The lamps go out after a restart and return on a cold morning, after a car wash, after a water crossing or a day on the trail. A Wrangler sees more vibration, water and temperature swing than most vehicles, and the module's connector and solder joints take that abuse. One JK owner report in our files describes C2200 clearing after the module harness was unplugged and the connector cleaned, which is the reason the connector is checked before the module is condemned. Wheel-speed codes (C100A, C1020) light the same lamps as an internal fault but have a different cause, usually at an axle, not in the module.

The fault codes you will see

None of these will show on a reader that talks only to the engine controller, so use a tool that opens the ABS module. Our files tie the following codes to the JK.

Code Meaning What it points to
C2200 Anti-lock brake module internal: the module monitors its own microprocessors and sets this on an internal fault The control module's electronics
C2200-49 Anti-lock brake module internal fault (the same fault with its failure-type byte) The control module's electronics
C2116 ABS pump motor supply low voltage The pump feed stage in the module, or a weak supply or ground to it
U0121 Lost communication with the ABS module What the rest of the Jeep records once the ABS module goes quiet
C2100 Battery voltage low A weak battery, a charging fault or a drop on the module's feed
C2101 Battery voltage high The charging system pushing voltage above the module's limit
C100A ABS wheel-speed sensor fault A sensor, its tone ring or its harness, not the module
C1020 Wheel-speed sensor fault The same: a wheel end, not the module

The scan tool cannot communicate with the ABS module. This presentation has two very different causes: either the module has no power or ground, or the module is powered and its network driver or processor has failed. Before shipping anything, check for battery voltage on the module's feed pins with the key on and for a solid ground on its ground pins; check the connector for pushed-back terminals; and look for U0121 in the other modules. A module that has power, ground and a clean connector and still does not answer is a module fault, and that is bench work.

Why these modules fail

An internal fault on the MK61 control module is a board failure. The module checks its own processors against each other and against its memory at each power-up and while it runs; when a supply rail sags inside the module, a solder joint at the connector or the power stage cracks, or a component ages out of specification, that check fails and C2200 is stored.

The pump supply fault, C2116, comes from the stage that switches battery power to the pump motor. The module measures the voltage it delivers to the motor against what it expects, and reads low when the driver has degraded, when the motor draws more than it should, or when the feed or ground to the module is weak. Only the first is a module repair, which is why the pump drive is tested under a real load on the bench and why you should check the supply before you ship.

Loss of communication is the network driver, or the processor behind it, going quiet.

What is not the module: the wheel-speed sensors and their tone rings (C100A, C1020), which on a JK suffer from axle-end harness chafe, rust on the tone rings and, on modified Jeeps, aftermarket hubs and axles; the battery and alternator (C2100, C2101); the pump motor itself when it has seized or burned; and the valve block, whose faults name a hydraulic circuit. Our files also note that replacement JK modules have been expensive and at times back-ordered, and that the 2009 module number is discontinued at Mopar, which is a large part of why repair rather than replacement is the usual route for this Jeep.

Check these before you condemn the module

  1. Battery and charging. Measure resting voltage and charging voltage at idle with the blower, lights and any winch or auxiliary circuits on. C2100 and C2101 are voltage faults first.
  2. Fuses and relays. Confirm the ABS fuses in the underhood fuse and relay box are intact with a test light.
  3. Grounds. Check the engine-to-body and body-to-frame straps, then do a voltage-drop test from the module's ground pin to the battery with the pump running. Corroded grounds show up as C2116 and as intermittent communication.
  4. The connector. With the battery disconnected, unplug the module and inspect every cavity for green corrosion, spread terminals and moisture. Clean it, reconnect it firmly and clear the codes; if C2200 does not return, you have found the fault.
  5. Wheel-speed data. Drive slowly with the tool graphing all four speeds. A channel that drops to zero, spikes or lags is a sensor, tone ring or harness problem (C100A, C1020). Walk the harness along the axle tubes and look at the tone rings for rust and damage.
  6. Modifications. If the Jeep has been re-geared or runs much larger tires, make sure the tire size and axle ratio were updated in the vehicle's configuration; a mismatch confuses the stability system.
  7. The communication test. If the tool opens the module, record every code with its freeze-frame before clearing anything. If it does not, prove power and ground at the connector first.

Hand it to a shop if the pedal has changed, if fluid is disappearing, if a code names a hydraulic circuit, or if you are not set up to work under a Jeep safely. The module is our job; the Jeep around it is the mechanic's.

Repair, refurbished, used or new: what each really costs

What you choose Starting price What it gets you Afterward
Our repair From $499 Your own MK61 control module repaired at component level, coding untouched, with the 1-year warranty Code clearing, then whatever bleed, initialization or calibration the Jeep calls for
Refurbished unit carrying your data From $950 A refurbished module of the same family with your VIN, coding and configuration transferred from your original; the original is retained as the core The same
Used unit Listings ran roughly $988 to $1,795 by year when checked in October 2026 A module from another Jeep, coded to its VIN, with no history and usually a short or no warranty Coding to your VIN at a shop; mismatch risk
New unit (part only) $471.96 catalog price for the 2010 module 68067458AA; $533.50 for the 2008 module 68030936AB (list price $814), checked October 2026 A blank module, where the number is still available (the 2009 module is discontinued) Configuration to the Jeep plus any bleed or initialization

Those new-part prices cover the electronic module by itself; the control unit assembly, module plus hydraulic block, is listed in the same catalog at $627 for 2008 (list $950) and $2,524.50 for 2010–2018, and a shop that replaces the whole unit is quoting that number plus a brake bleed.

Our prices are starting prices, and the return label is extra: $29.95 for the standard service (3–5 business days), $54.95 if you want UPS 2nd Day Air, $94.95 for UPS Next Day Air. The label that brings the module to us is part of the service, and $55 upgrades it to UPS 2nd Day Air. Expect about a week on the bench, or 2–3 business days once rush repair (+$100) is added.

A 1-year warranty rides on every repair and refurbished unit, and the warranty page spells out what it covers. Whatever the bench finds beyond the service is quoted and approved before it is done. To order, pick MK60 / MK61 repair, or send a label photo through request a quote first.

Removing and shipping the module

On the MK61 the control module sits on the valve block and, on many units, comes off it with the lines left alone, so no fluid is opened. If you are not sure yours separates, send a photo through the quote form before you pull anything.

  1. Order first, so the RMA and the prepaid label are waiting in your email.
  2. Take the negative cable off the battery and give it a few minutes before you go near the module; never unplug it with the key on.
  3. Clean around the unit before you open anything, so trail dirt cannot fall between the module and the valve block.
  4. Lift the connector lock and pull the connector straight off the module. Look at the pins and photograph them.
  5. Take out the screws between module and valve block and lift the module off squarely. The solenoid stems stay with the valve block; do not pry against them.
  6. If the module will not separate, stop. Then the whole hydraulic unit has to come out: cap every port the moment a line is off, keep the unit upright, and tell us on the order that the complete unit is coming.
  7. Photograph the label. JK labels usually carry two numbers, a Mopar number (often with a P prefix, such as P68230240AA) and a Continental number in the 28.5265 or 25.0212 style; either will identify the module on our part-number lookup.
  8. Put the module in an anti-static or clean plastic bag, cover the connector, pack it with two inches of padding on every side, mark the RMA on the box and inside it, and attach the prepaid label.

Each of these steps is illustrated on the mail-in instructions page. Safety first: a Jeep with its module out has no ABS, traction control or ESP and every related lamp lit, and if a brake line was opened it is not to be driven at all until it has been bled and the pedal checked.

What happens at the bench

Once your RMA is matched to the box and the label photographed, the module goes on the MK61 fixture. We power it, pull its stored data and fault history, and exercise the pump-motor and valve drivers under load while watching the supply rails and the network traffic, which tells us whether C2200 came from a supply, a joint or a failed component. The repair happens at that level, on your board, so the coding never leaves the module; a full retest follows, including the self-test that set the code, and then it ships at the speed you chose. Beyond repair means you hear from us before anything else happens. How It Works walks through the process end to end.

After it is back in the car

Battery still disconnected, seat the module flat on the valve block before the screws go in, then push the connector home until the lock drops. Reconnect the battery, start the Jeep and clear every stored code, the U0121 entries in the other modules included. Within the first few vehicle lengths the ABS lamp should go out, and the traction and ESP lamps with it.

A module that came off on its own opened no fluid, so no bleed is forced on you, though the pedal deserves a check on the first drive. A hydraulic unit that came out whole is different: the system has to be bled, and the right way is the ABS bleed routine on the scan tool. The tool may also ask for a steering-angle sensor calibration after the module has been without power. Some vehicles still need a brake bleed, initialization or calibration after install; when yours does, follow the maker's procedure.

Part numbers for the Jeep Wrangler JK

Mopar's numbers change almost every model year, and the label may show a different number from the service number a dealer would order; both kinds are in our lookup. Type whatever is on the label into the part-number lookup and it returns the family, the vehicles it fits and the price.

Part number Note
68003363AB Mopar "Module-Anti-Lock Brakes", 2007 Wrangler 3.8L
5179771AA Mopar "Anti-Lock Brake System Modulator", 2007 Wrangler 3.8L (printed 05179771AA on some lists)
68030936AB Mopar "Module-Anti-Lock Brake System; Control Module, Hydraulic Unit", 2008 Wrangler 3.8L; replaces 68030936AA
68030935AA Mopar "Control Unit Anti-Lock Brake" (the control unit assembly, not the module alone), 2008 Wrangler 3.8L
68049852AB Mopar "Module-Anti-Lock Brake System", 2009 Wrangler 3.8L; replaces 68049852AA; discontinued
68067458AA Mopar "Module-Anti-Lock Brake System; Control Module", 2010 Wrangler 3.8L
68067457AA Mopar "Control Unit Anti-Lock Brake; Control Module, Modulator" (control unit assembly), 2010–2018 Wrangler 3.6L/3.8L
68089120AA Mopar "Module-Anti-Lock Brake System", 2011 Wrangler 3.8L
68145835AA Mopar "Module-Anti-Lock Brake System", 2012 Wrangler 3.6L
68145835AC Mopar "Module-Anti-Lock Brake System", 2014 Wrangler 3.6L
68259556AA Mopar "Module Anti-Lock Brake System", 2014–2015 Wrangler 3.6L
68259556AD Mopar "Module-Anti-Lock Brake System", 2017–2018 Wrangler 3.6L; replaces 68259556AA, AB and AC; replaced by 68259556AE

Label-style numbers seen on JK modules include P52126282AC (2008), P68032358AC and P05154117AA (2009), P68048555AC (2010, paired with Continental 28526314033), 05154212AD (2011), P68230240AA and P04779788AD (2012–2014, the former paired with 28526602033) and 68284715AA (2015). A label number that differs from the dealer's service number for the same year is normal; the lookup handles both.

FAQ

How much does Jeep Wrangler JK ABS module repair cost?

Having your own module repaired starts at $499, with return shipping from $29.95 added; a refurbished unit with your data written into it starts at $950. For comparison, a new Mopar module was listed at $471.96 to $533.50 depending on year when we checked, and used modules at roughly $988 to $1,795.

Can the JK module be repaired, or does it have to be replaced?

It can usually be repaired. C2200 is an internal fault on a board that we repair at component level, and the pump supply and communication faults are on the same board; the MK60 / MK61 family page describes the unit. If the bench finds the module beyond repair, you are told before anything else is done.

Do I need programming after the repair?

No programming visit for the module itself: a repaired module keeps the coding it came with, and a refurbished one arrives with yours already written in. Installation still follows Jeep's procedure, which can include a steering-angle sensor calibration and, if the hydraulic unit was opened, a scan-tool brake bleed.

How long is the Jeep off the road?

About a week on the bench plus shipping each way. Rush repair (+$100) brings the bench down to 2–3 business days; paying for UPS 2nd Day Air in (+$55) and out ($54.95) takes days off the shipping.

Can I drive the Jeep with the module removed?

If only the control module came off and no line was opened, the base brakes work and the Jeep can be moved, with no ABS, traction control or ESP and every related lamp lit. If the hydraulic unit was removed, it cannot be driven until the unit is back and the brakes bled.

Is it safe to keep driving with the ABS and ESP lamps on?

The Jeep stops normally, but without anti-lock, traction control or stability control. On a vehicle as tall and short in wheelbase as a Wrangler, losing ESP matters, so schedule the repair soon.

What are my options if the JK module is past repair?

You decide between two paths. One is a refurbished module of the same family, cloned with your VIN, coding and configuration, from $950, where you cover the gap between that price and what you have paid, confirmed with you first; the other is your own module back and the repair price refunded, less shipping and a $150 bench evaluation fee. Your original becomes the core only if a refurbished unit is made.

What warranty comes with it?

One year on every repair and every refurbished unit, from the day it ships. You do not choose it or pay for it separately. The TJ's Teves Mark 20 and the JL's MK100 are different units with their own pages; neither interchanges with the JK's MK61.

Sources