Chevy Equinox and GMC Terrain ABS Module Failure: Repair Guide
ABS Module Lab Team · · updated · 17 min read
What fails in the 2010–2017 Equinox and Terrain ABS module, the codes it stores, what repair versus replacement costs, and how to ship the unit to the bench.

ABS, traction-control and StabiliTrak warnings on a 2010–2017 Chevrolet Equinox or GMC Terrain trace, in our files, to one of two places: a wheel-speed signal the module no longer trusts, or an internal fault in the electronic brake control module (EBCM) bolted to the hydraulic unit. Repairing that module on our bench starts at $499; a refurbished unit with your vehicle's data cloned onto it starts at $950, and both come back coded to your VIN. The first step costs nothing: read the codes with a scan tool that can address the ABS module, because sensor codes and module codes on this platform lead to different repairs.
Which Equinox and Terrain models have this ABS unit
The second-generation Chevrolet Equinox ran from the 2010 to the 2017 model year, and the first-generation GMC Terrain was built beside it for the same years. Our vehicle data keeps the two on a single line because the GM catalog numbers for the electronic brake and traction control module kit are shared: 25926937 is listed for the 2010 Equinox and the 2010 Terrain together, 20837392 for the 2011 Terrain, and 22754644 for the 2012–2017 Terrain — the same number an independent rebuilder gives for its 2012–2017 Equinox module repair. The page for the line is /vehicles/chevrolet/equinox-terrain-2010-2017/, and the Terrain is listed under GMC as well.
The unit is a Continental Teves (ATE) design. One rebuilder calls the 2012–2017 Equinox module an MK61; another describes the GM EBCM on the 2012–2018 Equinox and Terrain as built by ATE. The supplier numbers printed beside the GM numbers on 2010–2012 units — 28.5265-3900.3 with 22755615, for example — follow ATE's own format, which is why the whole 2010–2017 run sits in our ATE / Continental MK60 / MK61 family. A 28.52xx number next to an eight-digit GM number on the label means you are looking at this unit.
Physically it is one assembly in the engine compartment: a pump motor, an aluminum valve block with the brake lines threaded into it, and the electronic control unit bolted to the face of the block. On this family the control unit is carried on the valve block and, on many units, can be unbolted from it, which is what allows a mail-in repair without opening a brake line. The 2018-on Equinox and Terrain use a different part family and are outside this guide.
The first-generation Equinox, 2005–2009
The 2005–2009 Equinox sits on the Theta platform it shared with the Pontiac Torrent and the Saturn Vue (the site lists the line under Pontiac and Saturn too, though the siblings' numbers were not verified). GM's catalog shows the 2005–2006 part as an "Electronic Brake Control Module Assembly (Remanufacture)" — 19302008 for AWD 3.4L and 19302021 for FWD 3.4L — and then a module kit with a new number for 2007 (19121967), 2008 (19153229) and 2009 (19178838). One source names a Bosch unit for the 2005 model year only, and because the kit numbers change for the later years we do not assign the first generation to a family: the bench identifies the unit from its label on arrival, and it is sold at the same $499 starting price as the any-make repair. Its sourced codes are the four wheel-speed codes C0035 through C0050 and C0265 for the EBCM relay circuit; its page is /vehicles/chevrolet/equinox-terrain-theta-2005-2009/.
Symptoms of a failing ABS module on the Equinox and Terrain
The documented pattern for the second-generation unit is three warnings at once — ABS, traction control and, on vehicles equipped with it, hill-descent control — caused by an internal failure of the pump-and-module assembly, with C0110 and C0550 stored. The GM bulletin our files cite words these warnings as "Service Traction Control" and "Service StabiliTrak", so owners often describe a StabiliTrak message rather than an ABS light.
Beyond that sourced pattern, the module behaves the way most ABS control units do when they fail. The warnings are intermittent at first — off on a cold morning, on after fifteen minutes of driving — and that temperature dependence is a strong hint that the fault is electronic, because a sensor gap or a broken wire does not heal itself when the engine bay cools. Over weeks or months the fault becomes permanent.
The pump motor can also misbehave: a pump that runs with the ignition on and the brakes untouched points at the driver stage in the module or at the pump itself, and a pump that never runs, with C0110 stored, points the same way. Normal braking is unaffected either way, because the hydraulic unit passes pedal pressure straight through when the module is inactive, but anti-lock, traction and stability functions are off.
The fault codes you will see
These are the codes our sourced data ties to the two Equinox lines. Read them with a tool that addresses the EBCM directly; a generic OBD-II reader shows engine codes only.
| Code | Meaning | What it points to |
|---|---|---|
| C0110 | Pump motor circuit malfunction | The pump-motor driver stage in the module or the pump motor itself; seen with internal failure of the pump-and-module assembly |
| C0550 | Electronic control unit performance | The module — its processor or internal supply has failed a self-check |
| C056D | Control unit internal fault | The module; GM also uses C056D in other control modules, so confirm your tool reads it from the EBCM |
| C0035 | Left front wheel speed sensor fault | Sensor, its wiring, or the encoder ring on the hub — not the module in most cases |
| C0040 | Right front wheel speed sensor fault | Same as C0035, right front |
| C0045 | Left rear wheel speed sensor fault | Same as C0035, left rear |
| C0050 | Right rear wheel speed sensor fault | Same as C0035, right rear |
| C0265 | EBCM relay circuit fault | The relay or driver inside the module (first-generation line) |
A GM service bulletin, available as a copy on the NHTSA site, is the source our files give for C0035 through C0050 as the EBCM's wheel-speed sensor codes; on the 2009–2012 GM trucks it covers, it says they are in most cases caused by ferrous metal debris stuck to the magnetic encoder ring on the wheel bearing hub, and that cleaning the ring clears them without replacing the EBCM. One wheel-speed code is a sensor-side job; all four at once, or wheel-speed codes together with C0550 or C056D, is a module-side job.
The case the table cannot show is the scan tool that cannot talk to the ABS module at all: no response from the EBCM, a lost-communication code in other modules, and the ABS, traction and StabiliTrak warnings on because the rest of the vehicle has lost the module. That is the usual way a dead module announces itself, but a blown fuse, a corroded connector or a broken ground produces exactly the same picture, so the checks two sections below matter most for this symptom.
Why these modules fail
The sourced failure for the 2010–2017 unit is an internal failure of the pump and module that stores C0110 and C0550. In practical terms the fault is inside the electronic control unit — the stage that drives the pump motor, the valve-solenoid drivers, the internal supply, or the connections between the circuit board and the coils in the valve block — power circuits switching high current in an engine bay that cycles from freezing to well above boiling, until joints and components fatigue.
The parts of the system that share the warning lights but are not the module:
- Wheel-speed sensors and encoder rings. Debris on the ring, a damaged ring, a failing sensor or chafed wiring gives the module a signal it rejects, and it sets a C0035–C0050 code.
- Wiring and connectors. Water intrusion, green corrosion on pins and a chafed harness produce intermittent power, ground and signal faults that look like a module problem from the driver's seat.
- The pump motor. Worn brushes or a seized armature can set C0110 just as a failed driver can; our bench tests the pump-motor circuit under load, which is how the two are told apart.
- Hydraulic faults. A valve that sticks inside the block changes pedal feel or lets one wheel drag; no module work fixes that.
When the codes are C0550 or C056D, or the module cannot be reached with good power and ground at its connector, the fault is in the electronics — and that is what a component-level repair addresses.
Check these before you condemn the module
Some of these take five minutes and save a shipment.
- Battery and charging voltage. A weak battery or a failing alternator sets low-voltage codes in the EBCM and can make it drop off the network; load-test the battery first.
- Fuses. Find the ABS fuses in the underhood fuse block — a high-amperage pump feed and a separate ignition feed to the module — and inspect each; a fuse that looks fine on top can be cracked underneath.
- Grounds. Follow the module's ground wire to its body or chassis point and clean it; a poor ground is the classic cause of a module that communicates intermittently.
- The module connector. Unplug it with the key off and look for water, corrosion or bent pins.
- Wheel-speed live data. Drive slowly with the scan tool graphing all four wheel speeds; a wheel that drops to zero or reads erratically identifies a sensor or encoder problem, and the GM bulletin's cleaning fix is worth trying before any part is bought.
- The communication test. Key on, can the scan tool address the EBCM? If not, check for battery voltage, ignition voltage and a solid ground at the connector; all present with no communication makes the module the suspect.
Get a mechanic involved if live data and back-probing are not your territory, if the brake pedal feels different from normal, or if the warnings arrived after a collision, a flood or a jump-start. At checkout you will be asked for the codes your scan tool shows and a few words on how the module is behaving.
Repair, refurbished, used or new: what each really costs
| Option | Price from | What it buys | Afterward |
|---|---|---|---|
| Our component-level repair | $499 | Your own module, repaired and tested, with its coding intact | Clear codes and a drive cycle; a bleed only where a line was opened |
| Refurbished unit with your data cloned onto it | $950 | A tested module of this family carrying your VIN, coding and configuration; your original becomes the core | Same as a repair |
| Used unit from a salvage yard | Varies | A module of unknown history coded to someone else's VIN | Usually needs dealer setup, and the warnings may not clear if the configuration does not match |
| New unit from a GM dealer | Not in our sourced data for this unit — ask the parts counter with your VIN | A blank module | Dealer programming and setup to your vehicle |
Everything above is a starting price: when the bench finds more work than the service covers, you get the cost and give the go-ahead before we do it. Return shipping is picked at checkout — $29.95 standard (three to five business days), $54.95 UPS 2nd Day Air, or $94.95 UPS Next Day Air — while the inbound label is on us, emailed once payment clears as USPS ground, or as UPS 2nd Day Air to the lab for +$55. The bench takes about a week; +$100 buys rush repair, which is 2–3 business days. A 1-year warranty on our work comes with the repair or the refurbished unit, counted from the day we ship it back; the warranty page has the terms.
A module we cannot repair stops the job until you have heard from us: take a refurbished unit for the difference from what you have paid (we confirm the figure first), or have the module back with the repair price refunded, less shipping and a $150 bench evaluation fee. Nothing ships before your original arrives, because the data for a refurbished unit comes out of it.
Ordering is done through start a repair with the MK60 / MK61 family selected; if you would rather have the unit confirmed first, send a label photo via request a quote. The family page at /abs-module-repair/ate-mk60/ lists the other vehicles sharing this unit.
Removing and shipping the module
Work on a cold engine with the key out, and disconnect the negative battery cable before you touch the module connector. Brakes are a safety system: if you are not sure of a step, let a shop remove the unit, and never drive the vehicle with a brake line open.
- Photograph the label first. A sharp photo of the GM number and the 28.xxxx supplier number, taken with the unit in place, is what we match to your RMA.
- Release the connector. Its locking lever or slide must be fully open before you pull; prying breaks the lock and the pins.
- Separate the control unit from the valve block. Remove the fasteners around its perimeter and lift the unit straight off — the solenoid stems stay with the block and the module's coils slide off them, the brake lines stay connected, and no bleed is needed afterwards.
- If it will not separate, send the whole hydraulic unit: cap every brake-line port the moment a line comes off, keep the unit upright, and expect a full bleed on reinstallation.
- Pack it. Seal the module in a bag, wrap it, and box it with cushioning on every side, with your RMA number inside and out; our mail-in instructions show each step.
- Use our label. The prepaid inbound label lands in your inbox after payment; print it, tape it on, and drop the box at the carrier. Status changes are emailed as they happen, and track repair shows the same timeline.
What happens at the bench
When the box arrives we match the module to its RMA, photograph the label and read every number on it, then power the unit on the bench and read out its stored data and fault memory before testing the pump-motor and valve circuits under load. The fault we find is repaired at component level on your own board; if the unit is past repair we stop and ask before doing anything more. After the repair the module goes through the same load tests a second time and ships back at the speed you chose, with its coding exactly as it arrived. Every stage of that is described on how it works.
After it is back in the car
Reinstall the module the way it came off: seat it squarely on the solenoid stems, tighten the fasteners evenly, latch the connector, and reconnect the battery. Clear the stored codes, then drive above walking pace so the EBCM sees all four wheel speeds; GM modules typically finish their self-test within the first few hundred yards.
If only the control unit was removed, no brake bleed is needed; if the whole unit came out, bleed all four wheels, using the scan tool's automated bleed procedure if yours offers one. A repaired module keeps your VIN and coding, and a refurbished one arrives with them written in, so there is no dealer programming visit for the module itself. Installation nonetheless follows the vehicle maker's procedure. Some vehicles still need a brake bleed, initialization or calibration after install. If a warning returns after a proper drive cycle, note the code and when it set, and contact us before anything is removed again.
Part numbers for the Equinox and Terrain
The first column is the GM catalog number on the label; the two first-generation numbers not in the table are 19302021 (2005–2006 Equinox FWD 3.4L) and 19153229 (2008 Equinox 3.4L/3.6L). Type any of these into our part-number lookup to see the family, the vehicles and the services for it.
| Part number | Note from our sourced data |
|---|---|
| 25926937 | GM catalog: electronic brake and traction control module kit, 2010 Equinox and 2010 Terrain (2.4L/3.0L) |
| 20837392 | GM catalog: electronic brake and traction control module kit, 2011 Terrain (2.4L/3.0L) |
| 22754644 | GM catalog: module kit, 2012–2017 Terrain (2.4L/3.0L/3.6L); also given by a rebuilder as the OEM number for its 2012–2017 Equinox MK61 repair |
| 22755615 | Equinox pump and ECU combined, supplier number 28526539003 / 28.5265-3900.3, 2010–2012 Equinox 2.4–3.0 |
| 22752690 | Equinox, supplier number 28.5264-5604.3 (listed as 22752690 / 28526456043) |
| 22892106 | Equinox ABS, listed as 22892106 / 28526515043 (years not given) |
| 23231817 | Equinox ABS, listed as 23231817 / 28526572313 (years not given) |
| 20864712 | Equinox ABS, listed as 20864712 / 28526017123; a parts listing ties it to the 2010–2011 Equinox and Terrain |
| 84136206 | Listed under Equinox with supplier number 28.5265-7231.3 (years not given) |
| 19302008 | GM catalog: electronic brake control module assembly (remanufacture), 2005–2006 Equinox AWD 3.4L |
| 19121967 | GM catalog: electronic brake control module kit, 2007 Equinox 3.4L |
| 19178838 | GM catalog: electronic brake control module kit, 2009 Equinox 3.4L/3.6L |
FAQ
How much does it cost to fix the ABS module on a Chevy Equinox?
Our component-level repair of the Equinox or Terrain module starts at $499; a refurbished unit carrying your cloned data starts at $950; return shipping from $29.95 is added at checkout. Those are starting prices, and anything the bench finds beyond the service is quoted to you before it is done.
Can the Equinox ABS module be repaired instead of replaced?
Yes. The second-generation unit is an ATE / Continental module whose documented failures are internal to the electronics, which is exactly what a bench repair addresses at component level while keeping your own module and its coding. The exceptions are water damage, collision damage and boards burned by an outside electrical fault, which we treat as past repair and tell you about first.
How long will the Equinox or Terrain be off the road?
Plan on inbound transit, about a week on the bench, and return shipping. Rush repair cuts the bench to 2–3 business days for +$100, while UPS 2nd Day Air to us (+$55) and a 2-day or overnight return tier shorten the shipping legs. If only the control unit is removed, the vehicle can be moved in the meantime, though without anti-lock, traction or stability control.
Can I drive with the ABS and traction lights on?
With the module in the vehicle and the hydraulic circuit intact, the base brakes still work, and many owners keep driving for a while with longer stopping distances in a panic stop and no traction or stability assistance. Treat it as a short-term situation and avoid wet or icy roads. If the red brake warning is on as well, if the pedal has changed, or if a brake line was opened, do not drive it.
Is the GMC Terrain module the same part as the Equinox module?
Our sourced data lists the two vehicles on one line: GM catalog number 25926937 covers the 2010 Equinox and the 2010 Terrain together, and 22754644 is listed for the 2012–2017 Terrain while a rebuilder gives it as the OEM number for its 2012–2017 Equinox repair. The label on your module settles it — send a photo through the quote form if the number is not one we list.
What happens if my module cannot be repaired?
Work stops, and you are the next person to hear about it. From there it is your call: a refurbished unit of this family with your data cloned onto it, where you cover the gap between its price and what you have paid once we confirm the figure, or your own module sent back with the repair price refunded minus shipping costs and a $150 bench evaluation fee. The original becomes our core only when a refurbished unit is made.
My scan tool shows C0035 — is that the module?
Usually not. C0035 through C0050 are the EBCM's wheel-speed sensor codes, and GM's own bulletin says debris on the hub's encoder ring is, in most cases, the cause on the trucks it covers. Check live data for the named wheel, clean the ring, and inspect the sensor and wiring before considering the module.
Sources
- GM service bulletin on wheel-speed sensor codes C0035–C0050 (NHTSA copy): https://static.nhtsa.gov/odi/tsbs/2014/MC-10246913-9999.pdf
- GM parts catalog, Chevrolet Equinox ABS control module: https://www.gmpartsgiant.com/oem-chevrolet-equinox-abs_control_module.html
- GM parts catalog, GMC Terrain ABS control module: https://www.gmpartsgiant.com/oem-gmc-terrain-abs_control_module.html
- The MK61 identification, the C0110 / C0550 / C056D meanings and the failure description come from independent rebuilder listings and an owner-forum thread, and the C0265 meaning from a code-reference page; none of those is a neutral host we link.


