Dodge Journey ABS Module Failure: Codes, Symptoms and Repair
ABS Module Lab Team · · updated · 17 min read
Why the 2009–2020 Dodge Journey ABS module fails, the codes it sets (C2116, C2200, U0121, C2100), what repair costs from $499 and how to ship the module in.

The 2009–2020 Dodge Journey uses a Continental (ATE) MK61 ABS unit, and the part of it that fails is the electronic control module: owners see the ABS and traction lamps together, the scan tool reports a pump motor fault (C2116), an internal fault (C2200) or no response from the module at all (U0121), and a dealer's answer is a new module that has to be programmed to the VIN. Having your own module repaired starts at $499, plus the return leg, keeps the VIN and configuration already on it, and takes about a week on the bench. Start by reading the codes with a tool that opens the ABS module, checking battery voltage, and photographing the label, in that order.
Which Dodge Journeys have this ABS unit
The Journey ran as one generation, the JC, from 2009 to 2020, with the 2.4L four-cylinder throughout, the 2.7L and 3.5L V6 engines in the early years and the 3.6L from 2011. Our files place the 2009–2018 cars on the Continental (ATE) MK61, with two listings agreeing on the unit; no source covers 2019–2020 by name, but the Mopar part numbers for those years continue the earlier series (the module 68397222AA is cataloged for 2018–2020 and the control unit 68164594AA for 2012–2020), so the whole run is handled as one job, with the unit confirmed from the label on arrival. From the 2012 model year the Journey falls under FMVSS No. 126, the federal standard that requires electronic stability control, which is why a later car shows a traction and stability lamp beside the ABS lamp.
Mopar catalogs the Journey's electronics and hydraulics as separate items. The "Anti-Lock Brake System Module" (or "ABS Control Module") is the electronic unit; the "Electrical Anti-Lock Brake System Control" is the control unit with its hydraulic block and modulator valve. That split is what makes the Journey a mail-in repair: the control module bolts to the face of the valve block and, on many units, comes away from it with the brake lines and fluid left in the car. The lab sells it as the ATE / Continental MK60 / MK61 family, which it shares with the Jeep Wrangler JK and the 2010–2017 Chevrolet Equinox and GMC Terrain, and the Journey's own page with every sourced number and code is Dodge Journey (JC) 2009–2020.
To locate it, trace the brake lines out of the master cylinder: they end at a cast aluminum body carrying a cylindrical pump motor, with the plastic control module and its wide connector bolted to one face.
Symptoms of a failing ABS module on the Dodge Journey
The usual first sign is a pair of lamps, ABS and traction control (the car with wavy lines), coming on together and staying on. On stability-equipped cars the ESC lamp joins them, and some owners also see the red brake warning when a low-voltage code (C2100) is involved. The car still brakes and drives; what has switched off is anti-lock, traction and stability assistance.
What the scan tool reports sorts the complaints into three groups. The first is the pump: C2116, the supply to the pump motor reading low when the module tries to run it, sometimes with a hum from the unit at key-on. The second is the module itself: C2200 or C2200-49, the module failing its own internal check, or U0121 stored in other modules because the ABS module has gone quiet and the tool cannot open it. The third is voltage and sensor supply: C2100 and C2101 for battery voltage below or above limits, and C2112 for the sensor supply circuit reading high.
The fault is usually intermittent at first. The lamps go out after a restart or a warm-up and come back the next cold morning, after a rough road or after a long drive, and the gaps between episodes shorten. That pattern, tied to temperature and vibration, points to a cracked joint or a degrading component on the board rather than a sensor.
Two more things owners notice. Cruise control can decline to set while a stability fault is present, since it listens to the same network. And a wheel-speed problem lights the same lamps as a module fault but stores a code that names a wheel, which the module codes in this guide do not.
The fault codes you will see
Reading them takes a tool that addresses the ABS controller, because a plain engine-code reader lists nothing from it. The codes our files tie to the Journey are these.
| Code | Meaning | What it points to |
|---|---|---|
| C2116 | ABS pump motor supply low voltage (reported with pump motor faults on 2016–2020 cars) | The pump feed stage inside the module, or a weak supply or ground to the module |
| C2200 | Anti-lock brake module internal fault | The control module's own electronics |
| C2200-49 | Anti-lock brake module internal fault, with the failure-type byte | The same internal fault |
| U0121 | Lost communication with the ABS module | Logged by the engine and body modules once the ABS node falls silent |
| C2100 | Battery (supply) voltage low | The battery, the alternator or a sag on the way to the module |
| C2101 | Battery voltage high | Charging-system overvoltage |
| C2112 | Sensor supply 1 voltage circuit high | The module's regulated feed to its sensors, or a sensor or harness pulling it out of range |
When the scan tool cannot communicate with the ABS module, treat it as a separate case. A silent module is either unpowered or failed. Check the ABS fuses, confirm battery voltage reaches the module's feed pins with the key on, check the ground, and look at the connector; if the engine and body modules carry U0121 but talk normally themselves, only the ABS node is missing. A module with power, ground and a clean connector that still does not answer has a dead network driver or processor, and that is a routine bench repair on this family.
Why these modules fail
Three stages on the MK61 control board account for the Journey's codes. The pump supply stage switches battery power to the pump motor and measures what it delivers; when its components degrade, the module reads the supply low under load and stores C2116. The internal check compares the module's processors and memory against each other at every power-up; a sagging internal rail, a cracked solder joint at the connector or power stage, or a component drifting out of tolerance fails that check and stores C2200. The network driver links the module to the rest of the car; when it fails, the module drops off the bus and U0121 appears everywhere but in the ABS module.
Heat and vibration under the hood do the damage, which is why the faults are intermittent first and permanent later.
C2112 deserves a separate note. The module generates a regulated supply for its sensors, and the code says that supply read high. That can be the regulator inside the module, but it can also be a sensor or a harness shorted to battery voltage pulling the supply up, so it is tested from the outside before the module is blamed (see the checklist).
What is not the module: the four wheel-speed sensors and their tone rings, the sensor harness, the battery and alternator behind C2100 and C2101, a seized or burned-out pump motor, and faults inside the valve block, which store codes naming a hydraulic circuit. The bench repairs the electronics; those parts are the installer's.
Check these before you condemn the module
- Battery and charging first. C2100 and C2101 are voltage codes. Measure resting voltage, put the battery on a load tester and read the charging voltage at idle with the lights and blower running. A weak battery can also knock the module off the network during cranking and leave U0121 behind.
- Fuses. Test the ABS fuses in the underhood box with a test light rather than by eye; a blown one accounts for a module that says nothing.
- Grounds. Clean and tighten the module and body grounds, then measure the voltage drop between the module's ground pin and the battery negative with the pump commanded on. A poor ground reads as C2116.
- The connector. Battery off, pull the module's plug and look into every cavity for green deposits, damp and loose terminals; clean it, plug it back in firmly, erase the codes and watch what comes back.
- Sensor supply (for C2112). Unplug the wheel-speed sensors one at a time with the key on and watch whether the code or the supply reading changes. If one sensor or harness pulls the supply out of range, the fault is at that corner, not in the module.
- Wheel-speed live data. Drive slowly with all four speeds graphed. One trace that falls to zero, jumps or trails the others points to that corner's sensor, ring or wiring, and the rear hubs deserve as close a look as the fronts.
- The communication test. When the tool can open the module, capture each code and its freeze-frame before anything is erased; when it cannot, establish power and ground at the plug before a box goes anywhere.
A shop should take over when the pedal has changed, when fluid is low, when a code names a hydraulic circuit, or when the brake system is not something you want to work on. Our part is the module; the car around it belongs to the mechanic.
Repair, refurbished, used or new: what each really costs
| Path | Starting price | What it means | Once installed |
|---|---|---|---|
| Our repair | From $499 | Component-level repair of the module you send, data left as it was, 1-year warranty | Code clearing; possibly a bleed, initialization or calibration |
| Refurbished unit with your data | From $950 | A refurbished MK61 loaded with the identity and settings read from your unit; we keep your original as the core | As above |
| Used unit | Varies | A module pulled from a salvage Journey, carrying that car's VIN, with no history and no way to know why it was removed | Programming to your VIN by a shop, with the mismatch risk that brings |
| New unit (part only) | From $392.16, the lowest catalog price for a Journey module in our files (checked October 2026) | A blank module, where the number is still stocked | Programming to the VIN plus any bleed or initialization |
Two things about the new-part figure. It is for the electronic module alone; the same catalog lists the control unit with its hydraulic block (68067671AA, 2010–2013) at $1,125.27, and a shop replacing the whole unit quotes that plus a bleed. And a new module arrives without your car's data, so it has to be programmed to the VIN before the car will accept it, which is a scan-tool visit on top of the part. A repaired module skips that step because it never lost its data.
The figures above are starting prices. Return shipping is added at checkout — $29.95 by standard service (3–5 business days), $54.95 by UPS 2nd Day Air or $94.95 by UPS Next Day Air — and the inbound label comes with the order, upgradable to UPS 2nd Day Air for $55. Bench time is about a week; with rush repair, +$100, it is 2–3 business days.
The 1-year warranty on every repair and refurbished unit is included with the order and starts when the module ships back; the terms are on the warranty page. If the bench finds more work than the service covers, you hear the cost and approve it before anything is done. Order through MK60 / MK61 repair, or use request a quote with a label photo if you want the number confirmed first.
Removing and shipping the module
The Journey's control module is bolted to the valve block and on many units lifts away from it, leaving the brake lines on the car, so the removal itself forces no bleeding. If you cannot tell whether yours separates, send a photo through the quote form first.
- Order first; the RMA number and the prepaid label arrive by email once payment clears.
- Remove the negative battery cable and allow a few minutes before you unplug anything; the key must be off.
- Trace the brake lines from the master cylinder to the unit and clean around it so nothing drops between the module and the hydraulic body.
- Swing the connector's locking lever and draw the plug off the module; take a photo of the terminals.
- Back out the module's mounting screws and draw it away from the block evenly. The solenoid stems remain in the hydraulic body, and nothing should be levered against them.
- Should the module refuse to separate, go no further: the complete hydraulic unit would have to come out, with every port capped as its line comes off and the unit kept upright, and the order should say that the whole unit is on its way. Once lines are open the car stays put until it has been bled.
- Photograph the label. Journey modules carry a Mopar number and often a Continental-style number in the 25.0212 or 28.5265 format beside it; either works in the part-number lookup.
- Seal the module in a bag with the connector protected, cushion it with two inches of padding, put the RMA on the carton and on a slip inside, and apply the prepaid label.
You will find the same steps, with photos, on the mail-in instructions page. On safety: a car missing its module has base brakes but no ABS, traction or stability control, and all the related lamps stay on; if a brake line was opened, it does not move until the system has been bled and the pedal proves firm.
What happens at the bench
A Journey module arriving here is matched to its RMA and its label photographed before it is powered up on the MK61 fixture. With it running, we read the stored data and fault memory, then load the pump-motor and valve drivers while monitoring the supply rails and the network traffic; that shows whether a C2116 is a tired pump stage, whether a C2200 is a joint or a component, and whether a silent module has a dead driver.
The repair is made at that level, on your board, so the VIN and configuration are never disturbed. Afterward the module repeats the full test, including the internal check that set the original code, and goes back out at the shipping speed on your order with the tracking number emailed to you. Should it prove unrepairable, you hear from us before any further step; you can read the process on How It Works.
After it is back in the car
Refit with the battery still disconnected: set the module flat against the block, run the screws down evenly and press the connector on until the lever locks. Then reconnect the battery, start the car and erase the stored codes, not forgetting the U0121 entries the other modules hold. On the first drive the ABS lamp should go out once the module sees all four wheel speeds, and the traction and stability lamps with it.
Where only the module came off, nothing hydraulic was opened, so no bleed is forced; still, pay attention to the pedal on the first drive. When the whole hydraulic unit was out, the system must be bled, and the scan tool's ABS bleed routine is the way to clear the unit itself. Cars with stability control sometimes want the steering-angle sensor recalibrated after the module has been unpowered; the scan tool will raise that itself. Some vehicles still need a brake bleed, initialization or calibration after install, so follow the maker's procedure where it calls for one.
Part numbers for the Dodge Journey
Mopar issued a new module number for the Journey almost every year and superseded many of them, so the number on your label may not be the one a dealer quotes for the same year. All 29 catalog numbers in our files, plus the refurbisher-listed 68339085AB, are in the part-number lookup; the twelve most useful are below.
| Part number | Note |
|---|---|
| 68038226AA | Mopar "Anti-Lock Brake System Module", 2009 Journey 2.4L/2.7L/3.5L |
| 68038227AA | Mopar "ABS Control Module" (also listed as hydraulic control unit / modulator valve), 2009 Journey |
| 68067661AA | Mopar "Anti-Lock Brake System Module; Control Module", 2010 Journey 2.4L/3.5L |
| 68067662AA | Mopar "ABS Control Module", 2010–2013 Journey |
| 68067671AA | Mopar "Electrical Anti-Lock Brake System Control" (control unit with hydraulic block), 2010–2013 Journey |
| 68089576AA | Mopar ABS module, 2011 Journey 2.4L/3.6L; replaced by 68194695AG |
| 68159461AB | Mopar ABS module, 2012 Journey |
| 68164594AA | Mopar "Electrical Anti-Lock Brake System Control", 2012–2020 Journey |
| 68194693AB | Mopar ABS module, 2014–2015 Journey |
| 68194695AC | Mopar ABS module, 2015 Journey |
| 68194693AE | Mopar ABS module, 2017 Journey |
| 68397222AA | Mopar "Anti-Lock Brake System Module; Control Module", 2018–2020 Journey |
A catalog oddity worth knowing: 68397222AB is listed for the 2019 Journey as replaced by 68397222AA, a backwards supersession, and we record it as the catalog shows it. 68339085AB, offered for 2016–2020 2.4L and 3.6L cars, comes from a single refurbisher listing and does not appear in the Mopar results, so treat it as a label number to match rather than a service number to order.
FAQ
What does it cost to repair a Dodge Journey ABS module?
A repair of the module you already own starts at $499, with return shipping from $29.95 on top. A refurbished module with your data written into it starts at $950. For comparison, new Mopar Journey modules were cataloged from $392.16 when we checked, before the programming visit a new module needs, and the full control unit with hydraulic block at $1,125.27.
Is repair really an option, or does the Journey need a new module?
Repair is the normal route. The codes the Journey sets, C2116, C2200 and U0121, come from stages on the control board that are repaired at component level; the MK60 / MK61 family page covers the unit in detail. Should the bench find your module beyond repair, you are told before anything else happens.
Will the module need programming to my VIN afterward?
Not a repaired one: it comes back with the VIN and configuration it left with. A refurbished unit is written with your data here, from your original, before it ships. A new or used module, by contrast, has to be programmed to the car. Installation still follows Dodge's procedure, which may include a steering-angle calibration and, if the hydraulic unit was opened, a scan-tool bleed.
How long will the car be out of service?
Figure a week or so on the bench, with transit on either side. Rush repair (+$100) brings the bench to 2–3 business days, and the UPS 2nd Day Air options inbound (+$55) and outbound ($54.95) shorten the transit.
Can I drive the Journey while the module is out?
When nothing but the control module came off and every line stayed sealed, the base brakes still function and the car can be moved, without ABS, traction or stability control and with the lamps on. If the hydraulic unit was removed, it stays parked until the unit is back and the brakes are bled.
Can I keep driving with the ABS and traction lamps lit?
The car stops on its base brakes, but without anti-lock or stability control. If C2100 is stored with the red brake lamp, check the battery and charging system before you drive far, because a car that is losing voltage will shut down more than its ABS.
What happens when a module is beyond repair?
We stop and tell you. Your options are a refurbished module of the same family, loaded with your VIN, coding and configuration, from $950, where the amount you owe is the difference from what you have already paid and is confirmed with you first, or the return of your module with the repair price refunded less shipping and a $150 bench evaluation fee. No change to your price is made without your approval.
What is the warranty?
One year on each repair and refurbished unit, from the ship date. It is included with every order. It covers our work on the module, not the sensors, wiring or hydraulic unit around it.
Why can't you send me a refurbished module first?
Because the refurbished unit is made from your original: the VIN, coding and configuration are read out of your module and written into the replacement. Until your module is on the bench there is nothing to clone, so there is no advance exchange.
Sources
- Mopar part numbers, supersessions and new-part catalog prices: moparpartsgiant.com Dodge Journey ABS control module listings (https://www.moparpartsgiant.com/oem-dodge-journey-abs_control_module.html).
- Code definitions C2101 and C2112 for Dodge: autocodes.com (https://www.autocodes.com/c2101_dodge.html, https://www.autocodes.com/c2112_dodge.html).
- FMVSS No. 126 (49 CFR 571.126), the stability-control standard that applies from model year 2012: https://www.law.cornell.edu/cfr/text/49/571.126.
- Unit family, C2116 / C2200 / U0121 / C2200-49 reports, the C2100 symptom report and the 68339085AB listing: independent module repair and refurbisher pages and an owner Q&A thread (not linked).


