Jeep Compass and Patriot ABS Module: C2200 Failure and Repair
ABS Module Lab Team · · 17 min read
How to identify the 2007–2017 Jeep Compass and Patriot ABS module by part number, what C2200, C2116 and U0121 mean, and what repair costs from $499.

On a 2007–2017 Jeep Compass or Patriot, a C2200 code means the ABS control module's own self-test has found an internal failure, which makes that module, not the brakes around it, the first suspect. Repairing your own module here starts at $499 plus return shipping; a refurbished unit carrying your Jeep's data starts at $950, and the one new Mopar part with a catalog price on file, the 2008–2009 hydraulic control unit 68038073AA, was listed at $721.43. Before ordering anything, read every ABS code with a scan tool that reaches the module, check the battery and the module connector, and photograph the module label so its part number can be matched.
Which Jeep Compass and Patriot models have this ABS unit
The Compass (model code MK49) and the Patriot (MK74) were sold from 2007 to 2017 and share most of their anti-lock brake part numbers, so this site keeps them as one line on one page: 2007–2017 Jeep Compass and Patriot. The catalog files that line under the ATE / Continental MK60 / MK61 family. The label on your module identifies the exact unit, and the bench confirms it when the box is opened.
To find it, follow the steel brake lines from the master cylinder to the hydraulic unit: an aluminum valve block carrying a round pump motor, with the black control module and its wide connector fastened to it. On this family the control module is mounted on the valve block and, on many units, unbolts from it while the brake lines and fluid stay put. Traction and stability control depend on how the Jeep was equipped; where fitted, the same module runs them.
Mopar's catalog descriptions tell you which part a number covers. Most of the 29 numbers on file are described as the ABS module or control module, the electronic part that fails and ships. A smaller group is described as a modulator valve, a hydraulic control unit or an "Anti-Lock Brake System Control", which the catalog marks as the HCU and modulator for 68067065AA, and a few name both. When you compare a quote or a listing, make sure both sides mean the same part.
Two details trip up part matching. New module numbers appear for the 2008, 2010, 2011, 2012 and 2014 model years, and several carry a later suffix that replaces an earlier one, so two Jeeps a year apart can wear different labels. Several numbers are also listed for front-wheel-drive Jeeps, which makes the drivetrain as important as the year: 68067062AA, for example, is listed by the Patriot catalog for 2010–2011 and 2013–2014 FWD and by the Compass catalog for 2010–2014 FWD.
If you also own a 2007–2018 Wrangler JK, it sits in the same family and sets the same internal-fault codes, but none of the 29 Compass and Patriot numbers appears on its list. The Wrangler JK guide covers that Jeep separately.
Symptoms of a failing ABS module on the Compass and Patriot
The amber ABS lamp comes first, and on Jeeps with traction and stability control their lamps light with it, because one module runs all of those functions and one internal fault shuts them all down. The base brakes keep working without the module, so an ordinary stop feels ordinary. What disappears is the anti-lock release in a hard stop on a slick road, and on equipped Jeeps the traction and stability help.
The fault can come and go. The lamps appear on a cold morning or after a washboard road, vanish after a restart and return days later. Faults that follow temperature and bumps like this are one of the ways these modules fail, whereas a broken wheel-speed wire usually sets a code that names one wheel.
The lamps cannot tell you which case you have; the codes in the next section can. One pattern belongs here: wheel-speed codes on more than one wheel at the same moment can come from the module itself, because it reads all four sensors and an internal fault can show up on several channels together.
The fault codes you will see
An engine-only code reader does not open the ABS module, so it will show none of these; you need a scan tool with ABS coverage for Chrysler-built Jeeps. These four codes are on file for the Compass and Patriot.
| Code | Meaning | What it points to |
|---|---|---|
| C2200 | ABS module internal failure | The control module's own electronics, found faulty by its self-test |
| C2200-49 | Anti-lock brake module internal fault | C2200 again, written on file with a -49 suffix |
| C2116 | ABS pump motor supply low voltage | The pump-motor output stage in the module, or a weak battery, fuse, feed or ground |
| U0121 | Lost communication with the ABS module | Logged by the engine, body and other modules once the ABS module goes silent |
When the scan tool cannot communicate with the ABS module, the module is unpowered, cut off from the network or failed, and the connector is where you tell them apart. With the ignition on, confirm battery voltage on the module's power pins and a solid ground on its ground pins, and look for green corrosion or a terminal pushed back in its cavity. Then see whether the other modules still answer the tool and hold U0121; if they do, only the ABS module has dropped off the network. Power, ground, sound network wires and a clean connector with no answer from the module point to the module itself, and that is bench work.
Why these modules fail
The control module is a circuit board living on the valve block in the engine bay, through every heat cycle, car wash and pothole the Jeep sees. On units of this family it does more than compute: the coils that work the valves sit inside the module housing, the module switches the heavy current that spins the pump motor, and it talks to the rest of the Jeep over the vehicle network. Each code on file belongs to one of those jobs.
- C2200 and C2200-49 are the module reporting on itself: its self-test has found a fault in its own electronics, such as the processor, memory, power stage, drivers or the connections to the hydraulic unit. The C2200 guide follows the code across every Chrysler-group line that sets it and describes the bench repair behind it.
- C2116 concerns the pump-motor supply, the highest-current path on the board. A fault in the driver that feeds the pump can read as low voltage, but so can a weak feed or ground reaching the module, which is not a module fault at all.
- U0121 is the network side going quiet: a failed power supply or transceiver inside the module, or lost power, ground or network wiring outside it.
Several faults light the same lamps without involving the module. Wheel-speed sensors and their tone rings fail on their own from rust, debris or a chafed harness, and they set codes naming one wheel. The pump motor belongs to the hydraulic unit, so a motor that has seized stays seized after a module repair; the same goes for a valve block with an internal leak. A weak battery or a poor ground can make a healthy module report low voltage. For how C2200 compares with the internal-failure codes other makers use, see ABS module internal-failure codes by make.
Check these before you condemn the module
- Battery and charging. Test the battery at rest and with the engine running, and load-test it if it is more than a few seasons old. A tired battery can set C2116 and can make the module drop off the network during cranking.
- Fuses. Find the ABS fuses in the underhood fuse box, the pump-motor fuse and the module feed, and test both sides of each with a test light instead of judging by eye.
- Grounds. Clean and tighten the battery terminals and the engine and body ground straps. Then have the scan tool run the pump while a meter reads between battery negative and the module's ground terminal: any real voltage there is resistance in the ground path.
- The connector. Battery off first. Unplug the module and go over each terminal for green corrosion, moisture and spread contacts, then clean it, reseat it until the lock engages, clear the codes and drive; a C2200 that stays away points to the connection.
- Wheel-speed data. Watch the four wheel-speed readings together on a slow loop around the block. One that falls out, jumps or trails the rest belongs to that wheel's sensor, tone ring or wiring.
- The communication test. Note which modules answer the tool and which hold U0121, and save every code with its freeze-frame data before clearing anything.
- The pedal. A pedal that sinks, feels soft or has changed in travel is a hydraulic or base-brake problem, and the Jeep should be inspected before it goes back on the road.
Bring in a mechanic if fluid is leaking, if a code names a hydraulic circuit, or if you cannot lift and support the Jeep safely. We repair the module; the vehicle around it belongs with a shop.
Repair, refurbished, used or new: what each really costs
| Path | Price | What it buys | What the Jeep needs afterward |
|---|---|---|---|
| Repair of your own module | From $499 | Your control module fixed at component level, its Jeep coding still inside, with the 1-year warranty | Reinstall, clear codes, test drive, then the install steps below |
| Refurbished unit carrying your data | From $950 | A reconditioned module of the same family, loaded with your original's VIN, coding and configuration; the original stays here as the core, with no core charge | Same as a repair |
| Used module | Not quoted here | A module pulled from another Jeep, still coded to that Jeep, with no history | Coding to your VIN at a shop, and the chance it carries the same fault |
| New Mopar hydraulic control unit 68038073AA (2008–2009 only) | $721.43 catalog price on the day it was read | A new hydraulic control unit, cataloged with the ABS control unit and modulator valve | Find out from your installer if it must be programmed, and at what cost; the lines get opened, so a bleed |
That new part is where the numbers cross. At $721.43 it costs less than a refurbished unit and more than a repair, and it fits only the 2008–2009 Jeeps it is listed for. It is the better buy when the hydraulic side has failed, such as a seized pump motor or a leaking valve block, because a module repair fixes neither. When the fault is in the electronics, as C2200 reports, the repair costs less, sends your module back with its stored coding and leaves the brake lines closed. A catalog price is the price on the day it was read, not a quote, and it covers the part alone.
Our figures are starting prices charged at checkout, and any extra work the bench uncovers is priced and sent to you for approval before it is done. What else goes on the bill depends on how fast you want things to move:
- Return shipping, picked at checkout: the standard service at $29.95 arrives in 3–5 business days, two-day UPS is $54.95 and overnight UPS is $94.95.
- Shipping to the lab: the prepaid label is included, and +$55 makes it UPS 2nd Day Air.
- Bench time: about a week, or 2–3 business days with rush repair at +$100.
A 1-year warranty comes with every repair and every refurbished unit, included in the price; it is the only warranty offered, and the warranty page explains it. When you are ready, order the MK60 / MK61 repair, or use request a quote to have the label number checked first.
If the module turns out to be past repair, the bench stops and asks you. You can take a refurbished unit and pay only the difference from what you already paid, or ask for your own module back and a refund of the repair price, less shipping and a $150 bench evaluation fee. A refurbished unit is never shipped ahead of your original, because your Jeep's data is read out of the original and it has to arrive first.
Removing and shipping the module
A C2200 thread on a Patriot owners' forum asks the practical question: can the module be changed without bleeding the brakes? On this family it often can, because the control module lifts off the valve block while the lines stay connected and no fluid is opened. If yours will not separate, the whole hydraulic unit has to come out and the system needs bleeding afterward, so send a photo through the quote form first if you cannot tell.
- Order before you start. The RMA number and prepaid label come by email, so the box can leave the day the module comes off.
- Park on level ground, set the parking brake and disconnect the negative battery cable. Wait a few minutes, and never unplug the module with the ignition on.
- Brush and wipe around the unit so grit cannot fall onto the valve stems once the module is lifted.
- Release the connector's locking lever, pull the plug straight off and look over the terminals.
- Remove the screws holding the module to the valve block and lift the module off evenly. The valve stems stay in the block; do not lever against them.
- If it will not come away, stop. Pulling the whole unit means opening the lines, so cap every port as it is freed, keep the unit upright and tell us when you order that the full assembly is in the box.
- Take a picture of the label before packing.
- Bag the module, cover the connector, surround it with two inches of padding in a sturdy box, write the RMA inside and out, and attach the prepaid label.
While the module is away, the Jeep still has its plain hydraulic brakes, but nothing stops a wheel from locking and the dash keeps its warnings lit. That holds only while the lines stay closed: once one has been opened, the Jeep is parked until the system is bled and the pedal comes up firm. Packing and labeling are covered on the mail-in instructions page.
What happens at the bench
When your box arrives, its RMA is matched to the order and the module label is photographed. On a powered test fixture the module's memory and stored faults are read, then the outputs that drive the pump motor and valve coils are worked under load, which shows where the fault behind the codes lies. The repair is made on your own board, so its stored Compass or Patriot coding goes back in with it; the MK60 / MK61 family page lists what is checked on this unit type. After a second full test the module ships at the speed you picked, a board beyond repair means you hear from us first, and How It Works follows a module from order to return.
After it is back in the car
Fit the module with the battery still disconnected: seat it flat on the valve block, run the screws in evenly and push the connector on until the lock closes. Reconnect the battery, start the engine and clear the codes in every module, the U0121 entries included. Confirm a firm pedal before the Jeep moves; the ABS lamp should then go out on the first short drive once the module has finished its self-check.
A module that came off by itself opened no fluid. A hydraulic unit that came out whole must be bled with the procedure for your Jeep, ideally with a scan tool that can cycle the ABS valves. Whatever the route, some vehicles still need a brake bleed, initialization or calibration after install. Keep the codes you read before the repair, too: if a lamp ever returns, comparing old and new codes shows at once whether it is the same fault.
Part numbers for the Compass and Patriot
All 29 numbers on file are in the part-number lookup, which returns the family, the vehicles and the price for any of them; twelve, spread across the model years, are below.
| Part number | Catalog note |
|---|---|
| 5191003AC | ABS module, 2007 Patriot |
| 5191006AD | ABS module, 2007 Compass and Patriot |
| 5179862AA | "Anti-Lock Brakes-Modulator Valve", 2007 Compass and Patriot |
| 68028343AA | "Module-Anti-Lock Brake System; Hydraulic Control Unit", 2008–2009 Compass and Patriot FWD |
| 68044937AB | ABS module, 2008–2009 Compass and Patriot FWD |
| 68044938AB | "Module-Anti-Lock Brake System; Control Module, Modulator Valve", 2008–2009; replaces 68044938AA and 68038072AA |
| 68067059AA | ABS module, 2010 Compass and Patriot, and 2012 Latitude and Sport FWD |
| 68067063AA | ABS module, 2010–2012; replaced by 68089568AC |
| 68067065AA | "Anti-Lock Brake System Control" (HCU and modulator), 2010–2017 |
| 68089567AC | Control module, 2011–2013; replaces 68089567AA and 68089567AB |
| 68089568AB | ABS module, 2012–2016 Compass and Patriot |
| 68223570AA | ABS module, 2014–2016; replaced by 68223570AC |
A number that is not on file still helps. Send it with a photo of the label through the quote form, and the bench identifies the unit before you ship anything.
FAQ
How much does Jeep Compass ABS module repair cost?
Repairing the ABS module from a 2007–2017 Jeep Compass or Patriot starts at $499, with return shipping from $29.95 added at checkout. A refurbished unit carrying your Jeep's VIN, coding and configuration starts at $950. The only new Mopar part with a price on file, the 2008–2009 hydraulic control unit 68038073AA, was listed at $721.43 for the part alone; fitting it opens the brake lines, so ask the installer about the bleed and any programming first.
Can I drive a Jeep Compass or Patriot with a C2200 code?
A Compass or Patriot with C2200 still stops on its base brakes, but anti-lock braking is off, along with traction and stability control on Jeeps that have them. Drive gently and leave more room on wet, icy or loose roads until the module is fixed. If the pedal has changed or the red brake lamp is lit, have the brakes checked before driving further.
Can a Patriot ABS module be repaired instead of replaced?
Yes, when the fault is in the module's electronics, which is where C2200 and C2200-49 point on the Patriot and Compass, and where C2116 and U0121 point once the battery, fuses, grounds and connector test good. The repair is made at component level on your own module, so its coding stays with it. If the bench finds it past repair, you choose between a refurbished unit for the difference in price and your module back with the repair price refunded, less shipping and a $150 bench evaluation fee.
Can I replace a Patriot ABS module without bleeding the brakes?
Often, yes: on the Patriot and Compass the control module unbolts from the valve block on many units, so the brake lines stay connected and no fluid is lost. If the whole hydraulic unit has to come out, the lines are opened and the brakes must be bled afterward. Send a photo of the unit before you start if you are unsure which case applies.
Does a Jeep Compass ABS module need programming after repair?
Repair sends back the Compass or Patriot module you shipped, with the coding it stored still inside, and the install then follows Jeep's procedure for your vehicle. A refurbished unit arrives with your data cloned onto it from your original. A new dealer module is another matter: before buying one, find out from the installer whether it must be programmed and how much that adds.
Is the Compass and Patriot ABS module the same as the Wrangler JK module?
The Compass, the Patriot and the Wrangler JK are filed in the same Continental family and share the C2200 group of codes. None of the 29 Compass and Patriot part numbers on file is listed for the JK, so match the number on your own label rather than the family name.
How long does Compass or Patriot ABS module repair take?
The module spends about a week on the bench, plus shipping in each direction. Rush repair for +$100 brings the bench time down to 2–3 business days, and faster labels, +$55 inbound and $54.95 or $94.95 for the return, save days in transit.
What warranty comes with a Jeep Patriot ABS module repair?
Every Patriot and Compass module repair, and every refurbished unit, comes with a 1-year warranty from the day it ships back. The warranty is included in the price, and it is the only warranty offered.
Sources
- Mopar part numbers, catalog descriptions, supersessions and the 68038073AA catalog price: moparpartsgiant.com Jeep Patriot ABS control module listings, page 1 and page 2.
- C2200 on the Patriot and the question of changing the module without bleeding the brakes: jeeppatriot.com owner forum thread.


