Ram 2500 and 3500 ABS Module Failure: C2200-49, Codes and Repair
ABS Module Lab Team · · 17 min read
Which ABS module a 1998–2018 Ram 2500 or 3500 carries, what C2200-49, C0265 and the two-digit codes mean, and what a repair costs: from $325 or $499.

C2200-49 or C2200 on a Ram 2500 or 3500, or an ABS pump that runs nonstop on a 1998–2005 truck, points at the electronic brake control module, which comes off the modulator valve by itself, so it is all you ship. Our repair costs from $325 on the Kelsey-Hayes unit fitted through 2005 and from $499 on the TRW unit fitted from 2006 to 2018, plus return shipping, and on a 2003–2009 truck the label decides which applies. First read the ABS codes, test the battery, fuses and grounds, and photograph that label.
Which Ram 2500 and 3500 trucks have this ABS unit
Three vehicle lines cover the heavy-duty Ram here, and the supplier changed partway through one of them.
| Model years | Trucks on the line | ABS unit on file | Repair price | Vehicle page |
|---|---|---|---|---|
| 1998–2005 | Ram 1500/2500/3500 (BR/BE, DR/DH); the Dakota (AN, pre-2005) and Durango (DN, pre-2004) share it | Kelsey-Hayes | From $325 | 1998–2005 Ram 1500/2500/3500 |
| 2003–2009 | Ram 2500 and 3500 | Kelsey-Hayes 2003–2005, TRW 2006–2009 | From $325 or $499, set by the label | 2003–2009 Ram 2500/3500 |
| 2010–2018 | Ram 2500 and 3500 | TRW EBC-440 | From $499 | 2010–2018 Ram 2500/3500 |
Through 2005: Kelsey-Hayes. The early trucks carry a Kelsey-Hayes module, priced here as the Kelsey-Hayes EBC325 family, from $325. That line also holds the half-ton Ram, Dakota and Durango, so its number list mixes their modules in. Half-ton owners with a later truck should read the Ram 1500 ABS module guide instead.
2003–2009: two units on one page. This line's page is filed under Kelsey-Hayes and shows $325, the price of the unit it starts with. From the 2006 model year the line switches to a TRW module, part of the TRW EBC 345 / 440 / 450 family, which repairs from $499, so order by what the label names, not by the page. The catalog splits the 2003–2005 modules by engine (5.7L gas against 5.9L diesel, with the 2003 8.0L on the diesel number), while the 2006 and 2007 numbers list the gas and diesel engines together.
2010–2018: TRW EBC-440. The later trucks carry the TRW EBC-440, in the same family, from $499. The 2010 model year appears on both lines in the catalog (68066406AA on the older list, 55366224AR on the newer), so a 2010 owner should also go by the label.
A note for 3500 owners. The catalog notes on file name the Ram 2500 and never the 3500, so nothing proves a 3500 shares its year's 2500 number: match the label, not the badge.
Finding it. The module rides on the modulator valve, the cast aluminum block with the pump motor that the lines from the master cylinder run into; look for the electronic housing with the big harness plug. On both suppliers' units it separates from the valve body.
Symptoms of a failing ABS module on the Ram 2500 and 3500
Kelsey-Hayes trucks (through 2005). The failure on file is a pump that will not quit: the ABS pump runs constantly, so its motor keeps humming with the truck parked. The module stores C0265, also written as code 25, and logs two-digit codes for its internal main relay (65 and 66) and the pump motor (67 and 68).
TRW trucks (2006–2018). On 2006–2009 trucks the code on file is C2200, the module's internal-fault code. For the 2010–2018 trucks with the TRW EBC-440 the list is longer: a module that stops communicating, an ABS pump stuck on, operation that comes and goes, pump codes and the internal failure code C2200-49. Lamps that clear for a few days and come back with a change in temperature can point at the module's electronics, though a corroded plug can do the same. A fault that tracks bumps could be the module or a chafed sensor harness, and the live-data check below separates the two.
What the driver loses. The base brakes do not depend on the ABS module, so the pedal still stops the truck; anti-lock goes, and so do traction or stability control where fitted. With a loaded trailer hitched, wheels that can lock in a panic stop are a real hazard.
The fault codes you will see
An engine-only code reader shows nothing from the ABS module. Use a tool that opens a session with the ABS controller, write down each code before clearing, and note whether it returns at once or only after a drive.
| Code | Meaning on file | What it points to |
|---|---|---|
| C0265 | ABS / ESC module fault code, logged with the ABS pump running constantly; also written as code 25 | Kelsey-Hayes module, 1998–2005: the relay and pump stage inside it |
| 65 / 66 | Internal main relay | The relay built into the Kelsey-Hayes module |
| 67 / 68 | Pump motor fault | The pump motor or the module's pump stage |
| C2200 | Anti-lock brake module internal fault | The module, on TRW trucks from 2006 on |
| C2200-49 | Internal failure code | The same internal fault with its two-digit suffix (TRW EBC-440, 2010–2018) |
C2200-49 and C2200 describe one fault. The -49 is a two-digit failure-type suffix that the module reports with the base code; a scan tool that does not show suffixes prints plain C2200. Either way the module has reported a fault inside itself. Our guide to internal-failure codes by make compares how other makers word the same fault.
The Kelsey-Hayes two-digit numbers are whole codes. Enter "65" or "67" in the order form's code box just as your tool shows it.
No answer from the ABS module is a case of its own, and on 2010–2018 trucks it is one of the failures on file. A silent module is dead inside or unpowered: a blown ABS fuse, a corroded ground, a loose plug or a battery too weak to boot it all produce the same silence, and the other modules usually store a lost-communication code against it. Prove battery voltage and ground at the module's connector first; with both present, the network wiring intact and still no reply, the module is the repair.
Why these modules fail
Kelsey-Hayes: the relay stage. The module carries its own main relay and the switching for the pump motor, and the faults on file gather around that stage: the relay codes, the pump-motor codes and a pump that will not switch off. A relay contact that sticks shut would power the pump whether or not the module calls for it. The repair replaces the failed parts of that stage at component level and proves the module with a pump load connected; a motor that has cooked itself after days of running is a separate, hydraulic-side part.
TRW: the board. The TRW faults on file point at the electronics, though a pump code can also mean the motor. Heat cycles and vibration can crack solder joints at the connector and in the power stage of an ABS board, which is one reason a fault can come and go, and a part in a driver circuit can drift until the self-test rejects it. None of this shows on the outside of the case, so the bench works from the module's own fault memory and loaded outputs.
Not the module. A wheel-speed sensor that reads erratically or drops out at low speed, a cracked or rust-packed tone ring, a chafed sensor harness, a seized pump motor, a sticking valve in the hydraulic block and worn base-brake parts all light lamps or change how the truck stops, and a repaired module fixes none of them. A sensor fault names a wheel; a hydraulic fault shows in the pedal or as a pull. Suspect the module when the code is internal or names its relay, when the pump will not switch off, or when the module is silent with power and ground proven; a pump-motor code means the motor gets checked too.
Check these before you condemn the module
A work truck parked for a week costs money, so give the cheap causes an hour first.
- Battery and charging. Sagging voltage can make ABS modules drop out and store faults. Load-test the battery, both of them on a diesel, then read charging voltage at idle with the headlights and blower running.
- Fuses. In the underhood power distribution center, test each ABS fuse on both sides with a test light or meter. A dead pump fuse can account for a pump code, and a dead module fuse for a module that will not answer.
- Grounds. Clean the module and pump ground points to bright metal, tighten them, and check the voltage drop from the module's ground terminal to battery negative while the circuit is working.
- The plug. Battery disconnected, unplug the module and look into both halves for green corrosion, pushed-back pins and a water line; trucks that live in mud, road salt or the wash bay deserve the closest look.
- Wheel-speed live data. Roll slowly across a lot with the tool connected and watch each wheel-speed channel it offers. One that sits at zero, jumps or drops out over bumps points to a sensor, tone ring or wiring fault.
- A pump that will not stop. Read the codes while it runs: on a Kelsey-Hayes truck, C0265 or a relay code (65 or 66) points at the module, and a pump-motor code (67 or 68) means the motor on the truck gets checked too, since we repair the module and not the motor. Then pull the ABS pump fuse to spare the motor until the module is repaired; the base brakes work without it.
- Shop territory. A changed pedal, a fluid leak, a code naming a valve or a hydraulic circuit, or brake work you would rather not do is a mechanic's job. The lab repairs the module, not the truck.
Repair, refurbished, used or new: what each really costs
| Route | Price | What comes back | Needed after install |
|---|---|---|---|
| Kelsey-Hayes module repair (1998–2005, and 2003–2005 trucks on the 2003–2009 line) | From $325 | Your module, repaired at component level, bench-tested and still holding its data | Codes cleared and a drive; the lines stayed shut |
| TRW module repair (2006–2018) | From $499 | Your TRW module, repaired and tested the same way | Codes cleared and a drive |
| Refurbished module with your data | From $950 | A refurbished unit of your module's family, written with the VIN, coding and configuration taken from your original, which then stays here as the core (no separate core charge) | As for a repair |
| Used module | Varies | A salvage module with no history, still set up for its donor truck | Setup by a shop, plus the risk of a wrong suffix |
| New Mopar module | No current price on file | A new unit, if the number is still sold | Your installer can say if it needs programming and what that will cost |
These are starting prices: when the bench finds more wrong than your service covers, you get the cost and decide before that work starts. Price a new module with a dealer quote for your label number.
At checkout you also pick how it comes back: standard shipping ($29.95) takes 3–5 business days, and the faster UPS options are 2nd Day Air ($54.95) and Next Day Air ($94.95). The lab buys the inbound label and emails it after payment, USPS ground by default or UPS 2nd Day Air for $55 more. Bench time runs about a week; rush repair (+$100) shortens it to 2–3 business days. A 1-year warranty from the ship date comes with every repair and refurbished unit, included and the only one offered; the warranty page spells out its terms.
If the bench declares the module beyond repair, nothing more happens until you pick one of two routes: a same-family refurbished module carrying your data, for the gap between its price and your payment once we confirm the figure, or your module returned and the repair price refunded, less shipping and a $150 bench evaluation fee. No refurbished unit ships ahead of your original, because its data is read out of the original.
Order the Kelsey-Hayes EBC325 repair for a Kelsey-Hayes label or the TRW EBC repair for a TRW one; the TRW EBC family page lists the other vehicles on file in that family. With a worn or missing label, request a quote and attach a photo and the codes.
Removing and shipping the module
Only the control module travels. The modulator valve, pump and lines remain bolted in, so the brake fluid is never exposed.
- Order before you pick up a wrench. The RMA arrives by email and the prepaid label follows once payment clears, so the truck stays intact until then.
- Secure the truck. Level ground, wheels chocked, negative battery cable off (both cables on a diesel). Give it a few minutes, and never unplug the module with the key on.
- Release the harness plug on the module and draw it straight off. If the pins show corrosion, photograph them for the bench.
- Remove the module's screws and ease it off the valve body. If it will not come free, stop and send a photo through the quote form; prying can crack the aluminum.
- Keep every brake line tight. An opened line keeps the truck off the road until the system is bled.
- Record the label. Photograph it and keep the picture; the Mopar number on it identifies your module.
- Box it. Module in a bag, connector covered so nothing bends, two inches of padding on all sides of a sturdy box, the RMA written on the box and on a note inside, prepaid label on top.
The mail-in instructions page has the same sequence for any make. While the module is away the truck has no ABS, traction or stability help and its lamps stay lit; the base brakes still work, but keep driving to a minimum, tow nothing, and hand the removal to a shop if any step is outside your comfort.
What happens at the bench
The box is checked in against its RMA, and the label is photographed and its numbers read. On the bench it is powered up, its stored data and fault memory are read, and its pump-motor and valve circuits are tested under load; on a Kelsey-Hayes unit, that load test is what shows up a failing relay stage. The fault is repaired at component level, the module passes the same test a second time, and it is packed and shipped at your chosen speed with its original configuration. How it works shows the sequence from order to delivery.
After it is back in the car
Refitting is removal in reverse: battery still off, module seated on the valve body, screws tightened evenly, plug pushed home until it locks. Reconnect the battery (or both), clear the codes in the ABS module and the lost-communication codes in the other modules, and drive; the ABS lamp should go out once the module has seen the wheels turn and finished its self-check.
No line was opened, so the removal itself does not call for a bleed. For the 2010–2018 trucks, the note on file says a repaired module goes back in without programming, since it keeps its own configuration, and a refurbished unit arrives already written with your truck's data. That said, some vehicles still need a brake bleed, initialization or calibration after install. Follow the manufacturer's procedure whenever the scan tool asks for one.
For a new dealer module, ask your installer if it needs programming and what that will cost. If a lamp returns after a full drive, write down the code and the conditions and get in touch before pulling anything.
Part numbers for the Ram 2500 and 3500
A Mopar number ends in a two-letter suffix that advances with each revision, and the label may print a leading P. Enter the number in the part-number lookup as your label shows it; if a number with a P finds nothing, try it without the P.
| Part number | Note on file |
|---|---|
| P52010072AF | Label number matching Mopar 52010072AF, 2000 Ram 2500 Quad Cab |
| P52010033AE | Label number matching Mopar 52010033AE, 2002 Ram 2500 Quad Cab |
| 52010149AE | Mopar ABS pump/control module, 2003 Ram 2500 8.0L / 5.9L diesel (labels read P52010149AE) |
| 52110034AD | Mopar ABS control module, 2003 Ram 2500 5.7L; a label may read P52110034AE, a suffix not seen in the catalog |
| 52121408AB | Mopar ABS control unit, 2004 Ram 2500 5.9L diesel |
| 52121409AD | Mopar ABS control module, 2005 Ram 2500 5.7L |
| 55366224AD | Mopar ABS control module, 2006 Ram 2500, 5.9L diesel and 5.7L |
| 55366224AJ | Mopar ABS control module, 2007 Ram 2500, 5.9L or 6.7L diesel and 5.7L |
| 68031761AA | Mopar ABS module, 2008–2009 Ram 2500 |
| 55366224AR | Mopar anti-lock brake control unit, 2011 Ram 2500 6.7L diesel / 5.7L, also listed for the 2010 Dodge Ram 2500 |
| 68143491AA | Mopar electrical anti-lock brake system control, 2012–2018 Ram 2500 |
| 68347098AB | Mopar ABS control module, 2018 Ram 2500 |
The 2010–2018 line also holds suffix series: 68143490 (AB to AD), 68204539 (AA to AE, AG, AH, AJ), 68232683 (AA, AE, AF, AG), 68295359 (AA to AD) and 68347098 (AA to AC), with 68143490AB dated 2012, 68204539AB and 68204539AC 2013, 68232683AE 2015, 68295359AB 2016 and 68347098AA 2017. 5175413AC and 68142311AA are on file for the 2003–2009 line with no catalog year.
FAQ
How much does a Ram 2500 ABS module repair cost?
A Ram 2500 or 3500 ABS module repair starts at $325 for the Kelsey-Hayes module fitted through 2005 and at $499 for the TRW module on 2006–2018 trucks. Return shipping is extra, from $29.95, and a refurbished module carrying your truck's data starts at $950. Work beyond the service is quoted to you and approved before it starts.
What does C2200-49 mean on a Ram 2500 or 3500?
C2200-49 is the internal failure code from the ABS module, which on 2010–2018 heavy-duty Rams is the TRW EBC-440. The module has reported a fault inside itself, and a tool that drops the suffix shows the same fault as C2200. With power and ground confirmed good, the fix is a module repair, not a sensor.
Is my 2003–2009 Ram 2500 a Kelsey-Hayes or a TRW?
On file, a 2003–2005 Ram 2500 or 3500 has the Kelsey-Hayes module and a 2006–2009 truck has a TRW module, and the module's label confirms which. The vehicle page for that line shows the $325 Kelsey-Hayes price, but a TRW label means the TRW repair, from $499. When the label is unreadable, send a photo through the quote form first.
Why does the ABS pump keep running on my Dodge Ram?
A nonstop ABS pump is the documented failure of the Kelsey-Hayes module on 1998–2005 Dodge Rams, stored as C0265 (also written as code 25), and a stuck-on pump is also listed for 2010–2018 TRW trucks. Read the codes while the pump runs, then pull the ABS pump fuse to spare the motor; the base brakes work without it. Send the module in with the codes you wrote down.
Can I tow with the ABS light on in my Ram 3500?
A Ram 3500 showing the ABS lamp still stops on its base brakes, but without anti-lock or traction and stability help in a hard stop. Locked wheels with a loaded trailer behind them are far harder to control, so leave the trailer behind until the module is repaired and drive the truck gently.
Does a repaired Ram 2500 ABS module need programming?
A repaired Ram 2500 or 3500 module comes back holding the configuration it left with, and for 2010–2018 trucks the note on file says the repaired original goes back in without programming. A refurbished module from us is written with your truck's data before it ships, and either way you clear the codes and follow any initialization the scan tool requests.
How long will my Ram be without its ABS module?
A Ram 2500 or 3500 goes without its ABS module for about a week on the bench plus transit in each direction, or 2–3 business days on the bench with rush repair. The truck keeps its base brakes while the module is away, since only the module comes off.
What happens if my Ram ABS module cannot be repaired?
A Ram ABS module found beyond repair stops the work, and you are contacted first. You can move to a refurbished module of the same family with your truck's data, paying only the difference from what you have already paid, or take your Ram's module back with the repair price refunded minus shipping and a $150 bench evaluation fee. A refurbished unit keeps your original as its core, with no separate core charge.
What warranty comes with a Ram ABS module repair?
A Ram ABS module repair, like every refurbished unit, carries a 1-year warranty from the day it ships back, included in the price. It covers our work on the module, not sensors, wiring or the hydraulic unit, and no other warranty is sold.


