ABS Module Lab

ABS module part number · Hybrid actuator · Mercedes format

04003-44347 — ABS module part number(Toyota Prius (XW20, Gen 2), 2004-2009)

04003-44347 is listed for the 2004-2009 Toyota Prius (XW20, Gen 2). This unit is quoted first — send a photo of the label and your VIN, and we confirm the work and the price before anything ships.

  • Unit: Hybrid actuator
  • 1 vehicle line
  • 4 fault codes
  • Replaces an earlier number

Vehicles that use 04003-44347

Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.

MakeModelYearsUnit familyNote
ToyotaPrius (XW20, Gen 2)2004-2009Hybrid brake actuator (brake booster with pump)T-SB-0032-16 NEW part for 2004-2005 Prius (replaces 44500-47091) source ↗

What this number tells you

Label format · Mercedes-Benz

Optional 'A' + 3 + 3 + 2 + 2 digits, optionally + 2-digit variant code (-80, -64). Control units often '... 545 xx 32', hydraulic/SBC units '... 431 xx 12', newer ESP units '172 900 52 14'. SBC labels also carry a Bosch 0265 960 0xx number.

e.g. A0054310512 · 203-545-17-32-80 · A 218-431-09-12 · 172-900-52-14-64

Spaces, dots and dashes do not matter: 04003-44347 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.

Replaced or replacing

04003-44347 is listed as replacing 44500-47091.

Either number goes on the same bench at the same price — send the one printed on your label.

Known failures on this unit

What brings a Hybrid actuator to the bench, in general terms:

  • ●Brake system warning and ABS lights together on a hybrid
  • ●Pump running constantly or brake-pressure faults
  • 2004-2009 Toyota Prius (XW20, Gen 2)

    Toyota T-SB-0032-16: brake, ABS and/or TRAC lights or 'Check VSC' with C1391/C1252/C1253/C1256 'may be caused by a small internal brake fluid leak inside the brake actuator'; repair = replace the brake actuator assembly. source ↗

Fault codes seen on these vehicles

As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.

CodeMeaningVehicle
C1391Stored with brake/ABS/TRAC lights or 'Check VSC' when the brake actuator has a small internal fluid leak (Toyota T-SB-0032-16) source ↗Toyota Prius (XW20, Gen 2)
C1252Listed in T-SB-0032-16 for the same internal-leak condition source ↗Toyota Prius (XW20, Gen 2)
C1253Listed in T-SB-0032-16 for the same internal-leak condition source ↗Toyota Prius (XW20, Gen 2)
C1256Listed in T-SB-0032-16; it as accumulator low pressure source ↗Toyota Prius (XW20, Gen 2)

Repair or refurbished: your options for 04003-44347

Both come back ready to install, with the same warranty.

  • Repair your 04003-44347

    Quote

    Free quote first

    • Your own module, repaired and tested on the bench
    • Keeps your VIN and coding — it is your module
    • About 1 week on the bench; rush 2–3 business days for +$100
    • 1-year warranty on our work, from the day we ship it back
    Get my free quote →
  • Refurbished unit with your data

    Quote

    Free quote first

    • A refurbished unit of the same family, tested on the bench
    • Your VIN, coding and configuration written in from your original
    • Your original stays with us as the core — no separate core charge.
    • About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives

    No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.

Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.

What to ship

What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.

Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.

Related part numbers

Other numbers on the same vehicle lines — the closest to 04003-44347 first.

All Toyota part numbers →

04003-44347 questions

Can 04003-44347 be repaired instead of replaced?

Hybrid actuator units are a different bench job, so they start with a free quote: send a photo of the label and your VIN and we tell you what can be done and the price before you ship anything. Nothing is charged until you approve the quote.

Which vehicles use 04003-44347?

It is listed for the 2004-2009 Toyota Prius (XW20, Gen 2). The note on file reads: T-SB-0032-16 NEW part for 2004-2005 Prius (replaces 44500-47091). Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.

Will I need programming after the repair?

Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.

How much does the 04003-44347 repair cost?

It is quoted first, and the quote is free. Hybrid actuator units are not sold at a fixed price online; send the label photo and your VIN and we confirm the price before you ship. Return shipping starts at $29.95 and the label to us is prepaid.

What if it cannot be repaired?

Because this unit is quoted first, nothing is charged until you approve the quote. If the bench then finds it past repair, we tell you before doing anything else: you choose a quoted replacement with your data cloned onto it, or your unit back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

04003-44347 on your label? Send a photo — the quote is free.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com