ABS Module Lab

ABS module part number · Hybrid actuator · Toyota / Lexus format

44510-30270 — ABS module part number(Toyota Camry Hybrid (XV40, XV50), 2007-2017)

44510-30270 is listed for the 2007-2017 Toyota Camry Hybrid (XV40, XV50). This unit is quoted first — send a photo of the label and your VIN, and we confirm the work and the price before anything ships.

  • Unit: Hybrid actuator
  • 1 vehicle line
  • 3 fault codes

Vehicles that use 44510-30270

Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.

MakeModelYearsUnit familyNote
ToyotaCamry Hybrid (XV40, XV50)2007-2017Hybrid brake actuator (brake booster with pump)—

What this number tells you

Label format · Toyota / Lexus

Five characters, a dash, five more (44050-06070). 44050 is Toyota’s number for the brake actuator assembly — the ABS/VSC hydraulic actuator, usually with the skid-control ECU and pump; 44540 and 44500 numbers are actuator-with-pump variants. source ↗

e.g. 44050-06070 · 44050-0C430 · 44050-42B21 · 44540-06010

Spaces, dots and dashes do not matter: 44510-30270 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.

Known failures on this unit

What brings a Hybrid actuator to the bench, in general terms:

  • ●Brake system warning and ABS lights together on a hybrid
  • ●Pump running constantly or brake-pressure faults

Fault codes seen on these vehicles

As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.

CodeMeaningVehicle
C1256Accumulator low pressure Toyota Camry Hybrid (XV40, XV50)
C1252Brake booster pump motor failure Toyota Camry Hybrid (XV40, XV50)
C1253Brake booster pump relay failure Toyota Camry Hybrid (XV40, XV50)

Repair or refurbished: your options for 44510-30270

Both come back ready to install, with the same warranty.

  • Repair your 44510-30270

    Quote

    Free quote first

    • Your own module, repaired and tested on the bench
    • Keeps your VIN and coding — it is your module
    • About 1 week on the bench; rush 2–3 business days for +$100
    • 1-year warranty on our work, from the day we ship it back
    Get my free quote →
  • Refurbished unit with your data

    Quote

    Free quote first

    • A refurbished unit of the same family, tested on the bench
    • Your VIN, coding and configuration written in from your original
    • Your original stays with us as the core — no separate core charge.
    • About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives

    No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.

Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.

What to ship

What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.

Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.

Related part numbers

Other numbers on the same vehicle lines — the closest to 44510-30270 first.

All Toyota part numbers →

44510-30270 questions

Can 44510-30270 be repaired instead of replaced?

Hybrid actuator units are a different bench job, so they start with a free quote: send a photo of the label and your VIN and we tell you what can be done and the price before you ship anything. Nothing is charged until you approve the quote.

Which vehicles use 44510-30270?

It is listed for the 2007-2017 Toyota Camry Hybrid (XV40, XV50). Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.

Will I need programming after the repair?

Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.

How much does the 44510-30270 repair cost?

It is quoted first, and the quote is free. Hybrid actuator units are not sold at a fixed price online; send the label photo and your VIN and we confirm the price before you ship. Return shipping starts at $29.95 and the label to us is prepaid.

What if it cannot be repaired?

Because this unit is quoted first, nothing is charged until you approve the quote. If the bench then finds it past repair, we tell you before doing anything else: you choose a quoted replacement with your data cloned onto it, or your unit back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

44510-30270 on your label? Send a photo — the quote is free.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com