ABS module part number · Honda VSA · Honda / Acura format
57111-T1X-A10 — ABS module part number(Honda CR-V (4th gen), 2012-2016)
57111-T1X-A10 is listed for the 2012-2016 Honda CR-V (4th gen). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Honda VSA
- 1 vehicle line
- 1 fault code
- Replaced by a later number
Vehicles that use 57111-T1X-A10
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Honda | CR-V (4th gen) | 2012-2016 | Honda / Acura VSA modulator | Superseded by 57111-T1X-A13 source ↗ |
What this number tells you
Label format · Honda / Acura
Honda service numbers are 5-3-3: a 5-digit base (57110 = VSA/ABS modulator on most models; 57111 = modulator assembly on CR-V, Odyssey 2011+, some 2016+ Accord/TL; 57100 = the 2016+ Civic / 2017+ CR-V / 2018+ MK100 generation) source ↗
e.g. 57110-T2F-L42 · 57111-TK8-A62 · 57100-TBA-A06 · 04571-SZA-A11
Spaces, dots and dashes do not matter: 57111-T1X-A10 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Replaced or replacing
57111-T1X-A10 is listed as replaced by 57111-T1X-A13.
Either number goes on the same bench at the same price — send the one printed on your label.
Known failures on this unit
What brings a Honda VSA to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
- 2012-2016 Honda CR-V (4th gen)
On some 2015 CR-V the Low Tire Pressure indicator comes on with VSA DTC C0077-78 even though tire pressures are set correctly; the fix is a VSA modulator-control unit software update, not a new module.
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C0077-78 | Low tire pressure threshold refinement: stored by the VSA modulator-control unit with the Low Tire Pressure indicator on although tire pressures are set correctly (2015 CR-V) | Honda CR-V (4th gen) |
Repair or refurbished: your options for 57111-T1X-A10
Both come back ready to install, with the same warranty.
Repair your 57111-T1X-A10
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
Ship the whole unit (pump, valve block and control unit are one piece); send a photo first and we confirm how to cap the ports.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 57111-T1X-A10 first.
- 57111-T1X-A132012-2016 Honda CR-V (4th gen)
- 57111-T1X-A122012-2016 Honda CR-V (4th gen)
- 57111-T1X-A112012-2016 Honda CR-V (4th gen)
- 57111-T0H-A022012-2016 Honda CR-V (4th gen)
- 57111-T0H-A012012-2016 Honda CR-V (4th gen)
- 57111-T0A-A022012-2016 Honda CR-V (4th gen)
- 57111-T0A-A012012-2016 Honda CR-V (4th gen)
57111-T1X-A10 questions
Can 57111-T1X-A10 be repaired instead of replaced?
Yes — that is the service. Mail in your 57111-T1X-A10 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 57111-T1X-A10?
It is listed for the 2012-2016 Honda CR-V (4th gen). The note on file reads: Superseded by 57111-T1X-A13. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 57111-T1X-A10 repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
57111-T1X-A10 on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair