ABS module part number · Honda VSA · Honda / Acura format
57111-TK8-A62 — ABS module part number(Honda Odyssey (4th gen), 2011-2017)
57111-TK8-A62 is listed for the 2011-2017 Honda Odyssey (4th gen). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Honda VSA
- 1 vehicle line
- 2 fault codes
- Replaces an earlier number
Vehicles that use 57111-TK8-A62
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Honda | Odyssey (4th gen) | 2011-2017 | Honda / Acura VSA modulator | VSA Modulator Assembly (Rewritable); 2014-2017 Odyssey LX/EX/EX-L/SE/Touring, KA 6AT; supersedes 57111-TK8-A61, -A60 source ↗ |
What this number tells you
Label format · Honda / Acura
Honda service numbers are 5-3-3: a 5-digit base (57110 = VSA/ABS modulator on most models; 57111 = modulator assembly on CR-V, Odyssey 2011+, some 2016+ Accord/TL; 57100 = the 2016+ Civic / 2017+ CR-V / 2018+ MK100 generation) source ↗
e.g. 57110-T2F-L42 · 57111-TK8-A62 · 57100-TBA-A06 · 04571-SZA-A11
Spaces, dots and dashes do not matter: 57111-TK8-A62 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Replaced or replacing
57111-TK8-A62 is listed as replacing 57111-TK8-A61 and 57111-TK8-A60.
Either number goes on the same bench at the same price — send the one printed on your label.
Known failures on this unit
What brings a Honda VSA to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
- 2011-2017 Honda Odyssey (4th gen)
Honda SB 16-005 (2011-2014 Odyssey, early 2015): multiple indicators with VSA DTC 81-1 and/or 61-1 because the VSA software is sensitive to low battery voltage; the fix is a VSA modulator-control unit software update plus sensor neutral-position memorization - not a hardware replacement. source ↗
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
Repair, refurbished or new: your options for 57111-TK8-A62
The new-part price is the part alone, from an online parts catalog, as of October 2026.
Repair your 57111-TK8-A62
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
New 57111-TK8-A62 (part only)
$842.95
catalog price, as of October 2026 source ↗
- A new unit from a parts catalog — the part alone
- Not coded to your vehicle — set up after install per the maker's procedure
- Shipping time and warranty as the parts catalog states them
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
Ship the whole unit (pump, valve block and control unit are one piece); send a photo first and we confirm how to cap the ports.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 57111-TK8-A62 first.
- 57111-TK8-A612011-2017 Honda Odyssey (4th gen)
- 57111-TK8-A602011-2017 Honda Odyssey (4th gen)
- 57111-TK8-A032011-2017 Honda Odyssey (4th gen)
- 57111-TK8-A022011-2017 Honda Odyssey (4th gen)
- 57111-TK8-A012011-2017 Honda Odyssey (4th gen)
- 57110-TK8-A610-M12011-2017 Honda Odyssey (4th gen)
57111-TK8-A62 questions
Can 57111-TK8-A62 be repaired instead of replaced?
Yes — that is the service. Mail in your 57111-TK8-A62 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 57111-TK8-A62?
It is listed for the 2011-2017 Honda Odyssey (4th gen). The note on file reads: VSA Modulator Assembly (Rewritable); 2014-2017 Odyssey LX/EX/EX-L/SE/Touring, KA 6AT; supersedes 57111-TK8-A61, -A60. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 57111-TK8-A62 repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new 57111-TK8-A62 is listed at $842.95 for the part alone (catalog price as of October 2026). Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
57111-TK8-A62 on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair