ABS module part number · Bosch 9 · Volkswagen / Audi format
80A-614-517-AD-BEF — ABS module part number(Audi A4 / A4 allroad / A5 (B9), 2016-2020)
80A-614-517-AD-BEF is listed for the 2016-2020 Audi A4 / A4 allroad / A5 (B9). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Bosch 9
- 1 vehicle line
- 1 fault code
Vehicles that use 80A-614-517-AD-BEF
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Audi | A4 / A4 allroad / A5 (B9) | 2016-2020 | Bosch ABS / ESP 9 | — |
What this number tells you
Label format · Volkswagen / Audi (VAG OEM)
Prefix (3 chars) + group + base + optional 1-3 letter suffix. Control units: 907 379 (Bosch 5.3: 998 375; some 907 375). Hydraulic units: 614 517 / 614 109 / 614 117 / 614 111, often listed with a 'BEF' (filled) or '-REP' suffix. Printed with spaces, dashes or nothing.
e.g. 1C0907379K · 1K0-614-517-ED-BEF · 8E0 998 375 G · 1J0-698-217-A
Spaces, dots and dashes do not matter: 80A-614-517-AD-BEF is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Known failures on this unit
What brings a Bosch 9 to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
- 2016-2020 Audi A4 / A4 allroad / A5 (B9)
Code C123EF0 (hydraulic brake booster limit value reached), no communication with the ABS module, invalid data from the module, wheel-speed-sensor codes and ABS valve supply voltage circuit open as common failures of these Bosch 9.0 units.
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C123EF0 | Hydraulic Brake Booster Limit Value Reached | Audi A4 / A4 allroad / A5 (B9) |
Repair or refurbished: your options for 80A-614-517-AD-BEF
Both come back ready to install, with the same warranty.
Repair your 80A-614-517-AD-BEF
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
Ship the control unit; on many units it unbolts from the valve block so the brake lines stay on.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 80A-614-517-AD-BEF first.
- 80A-614-517-B-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 8W0-614-517-J-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 8W0-614-517-AT-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 8W0-614-517-AH-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 4G0-614-517-AK-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 4K0-614-517-AC-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 4M0-614-517-AA-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 4M0-614-517-AB-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
- 4M6-614-517-AD-BEF2016-2020 Audi A4 / A4 allroad / A5 (B9)
80A-614-517-AD-BEF questions
Can 80A-614-517-AD-BEF be repaired instead of replaced?
Yes — that is the service. Mail in your 80A-614-517-AD-BEF module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 80A-614-517-AD-BEF?
It is listed for the 2016-2020 Audi A4 / A4 allroad / A5 (B9). Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 80A-614-517-AD-BEF repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
80A-614-517-AD-BEF on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair