ABS Module Lab

Toyota · 2010-2015 · Hybrid actuator

Toyota Prius (XW30, Gen 3) ABS module repair

Mail in your Toyota Prius (XW30, Gen 3) ABS module with our prepaid label. It comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

Safety recall — check it first

NHTSA recall 13V-235 (certain 2010 Prius and HS 250h): the brake booster pump assembly can crack inside the accumulator housing, leaking nitrogen into the brake fluid and gradually losing power assist; remedy = inspect and replace the brake booster pump assembly. source ↗

A recall may cover only some of these vehicles. Enter your VIN at nhtsa.gov/recalls before sending us anything. We would rather you get it fixed free: if the recall is open on your VIN, the dealer remedy costs you nothing.

  • Unit: Hybrid actuator
  • Stability control: depends on trim
  • 5 sourced part numbers
  • 3 fault codes
This vehicle uses a non-standard brake unit, so it starts with a free quote.

The ABS module in the Toyota Prius (XW30, Gen 3)

The 2010-2015 Toyota Prius (XW30, Gen 3) uses this ABS unit: HYBRID brake booster pump assembly (accumulator) + brake booster/master cylinder with ABS actuator. source ↗ The same unit covers the Prius (XW30, Gen 3) and Lexus HS 250h (2010). On our bench that puts it in the Hybrid brake actuator (brake booster with pump) family, alongside 4 other vehicle lines on this site.

Its ABS module appears under 5 part numbers, starting with 47050-47190. source ↗ Different numbers usually separate model years, drivetrains and option packages — match the number on your own module label rather than the year alone. What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.

Toyota Prius (XW30, Gen 3) ABS module part numbers

Match the number printed on your module's label. Each number opens its own page — the vehicles it fits, the unit and the price — and parts-catalog sources are linked.

Reading the label · Toyota / Lexus

Five characters, a dash, five more (44050-06070). 44050 is Toyota’s number for the brake actuator assembly — the ABS/VSC hydraulic actuator, usually with the skid-control ECU and pump; 44540 and 44500 numbers are actuator-with-pump variants. source ↗

e.g. 44050-06070 · 44050-0C430 · 44050-42B21

ABS fault codes on the Toyota Prius (XW30, Gen 3)

  • C1252

    Brake booster pump motor failure

  • C1253

    Brake booster pump relay failure

  • C1256

    Accumulator low pressure

Our promise

Can’t be repaired? You don’t pay for a repair.

If the bench finds your module past repair, we stop and tell you before doing anything else. Then you choose:

  1. 1A replacement — a refurbished unit of the same family with your VIN, coding and configuration cloned onto it, from $950. You pay only the difference from what you already paid, and we confirm the amount with you first.
  2. 2Your module back — with the repair price refunded, minus shipping costs and a $150 bench evaluation fee.

Either way, nothing that changes your price happens without your OK.

Refund stages in our terms →

Other vehicles with the Hybrid actuator

Same unit family, same bench process and the same starting price.

All Hybrid brake actuator (brake booster with pump) vehicles →

Toyota Prius (XW30, Gen 3) ABS module questions

Which ABS module is in the Toyota Prius (XW30, Gen 3)?

It uses this unit: HYBRID brake booster pump assembly (accumulator) + brake booster/master cylinder with ABS actuator. We price and bench it as part of the Hybrid brake actuator (brake booster with pump) family. The exact unit is confirmed from your module label on arrival.

How much does ABS module repair cost for a Toyota Prius (XW30, Gen 3)?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid.

My Toyota Prius (XW30, Gen 3) module number is not listed. Can you still repair it?

The 5 numbers above are the ones we could source, not every one that exists. Send us a photo of the label first, or order the repair and we confirm the unit before any work.

Is there a recall on the Toyota Prius (XW30, Gen 3) ABS unit?

There is a recall on this unit for some of these vehicles (source linked above). Check your VIN at nhtsa.gov/recalls first — if the recall is open on your car, the dealer remedy is free.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

Toyota Prius (XW30, Gen 3) ABS light on? Fix the module you already own — quote.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com