C1130
ABS / stability-control fault code, listed for 10 vehicle lines from Infiniti, Nissan. What it means on each one, from published sources, and when the module is the cause.
What C1130 means
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2013 G37 sedan, coupe and convertible (V36).
On: 2007-2013 Infiniti G35 sedan (V36)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012 Altima coupe (L32).
On: 2007-2012 Nissan Altima (L32) sedan/coupe
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2013-2017 Altima sedan (L33).
On: 2013-2018 Nissan Altima (L33)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012 Frontier (D40).
On: 2005-2012 Nissan Frontier (D40)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2014 Maxima (A35).
On: 2004-2014 Nissan Maxima (A34, A35)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2014 Murano (Z51).
On: 2003-2014 Nissan Murano (Z50, Z51)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first.
On: 2015-2019 Nissan Murano (Z52) 2015-2018
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012 Pathfinder (R51).
On: 2005-2012 Nissan Pathfinder (R51)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2013 Rogue (S35).
On: 2008-2013 Nissan Rogue (S35)
Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2015 Titan (A60) and Armada (TA60).
On: 2004-2015 Nissan Titan (A60)
Is it the ABS module?
Check the cheap things first: battery voltage and the main fuses for the ABS pump and module, the ground straps, the module connector (corrosion, a pushed-back pin) and, for wheel-speed codes, the sensor and its wiring at each wheel. If those are good and the code returns as soon as it is cleared — or the scan tool cannot talk to the ABS module at all — the module itself is the likely cause, and that is what we repair.
Vehicles that set C1130
- 2007-2013 Infiniti G35 sedan (V36)Nissan / Infiniti ABS actuator and ECU · 5 part numbers
- 2007-2012 Nissan Altima (L32) sedan/coupeNissan / Infiniti ABS actuator and ECU · 10 part numbers
- 2013-2018 Nissan Altima (L33)Nissan / Infiniti ABS actuator and ECU · 1 part number
- 2005-2012 Nissan Frontier (D40)Nissan / Infiniti ABS actuator and ECU · 3 part numbers
- 2004-2014 Nissan Maxima (A34, A35)Nissan / Infiniti ABS actuator and ECU · 4 part numbers
- 2003-2014 Nissan Murano (Z50, Z51)Nissan / Infiniti ABS actuator and ECU · 2 part numbers
- 2015-2019 Nissan Murano (Z52) 2015-2018Nissan / Infiniti ABS actuator and ECU · 4 part numbers · recall listed
- 2005-2012 Nissan Pathfinder (R51)Nissan / Infiniti ABS actuator and ECU · 2 part numbers
- 2008-2013 Nissan Rogue (S35)Nissan / Infiniti ABS actuator and ECU · 4 part numbers
- 2004-2015 Nissan Titan (A60)Nissan / Infiniti ABS actuator and ECU · 5 part numbers
C1130 by vehicle
What does C1130 mean on a Infiniti G35 sedan (V36)?
On the 2007-2013 Infiniti G35 sedan (V36) it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2013 G37 sedan, coupe and convertible (V36).. That vehicle uses Anti-skid actuator & ECU assembly. We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
What does C1130 mean on a Nissan Altima (L32) sedan/coupe?
On the 2007-2012 Nissan Altima (L32) sedan/coupe it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012 Altima coupe (L32).. That vehicle uses Anti-skid actuator assembly ('Actuator Assy-Anti Skid', pump + valves + control unit). We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
What does C1130 mean on a Nissan Altima (L33)?
On the 2013-2018 Nissan Altima (L33) it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2013-2017 Altima sedan (L33).. That vehicle uses Anti-skid actuator & ECU assembly. We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
What does C1130 mean on a Nissan Frontier (D40)?
On the 2005-2012 Nissan Frontier (D40) it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012 Frontier (D40).. That vehicle uses Anti-skid actuator assembly. We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
What does C1130 mean on a Nissan Maxima (A34, A35)?
On the 2004-2014 Nissan Maxima (A34, A35) it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2014 Maxima (A35).. That vehicle uses Anti-skid actuator assembly (ABS pump). We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
What does C1130 mean on a Nissan Murano (Z50, Z51)?
On the 2003-2014 Nissan Murano (Z50, Z51) it means: Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2014 Murano (Z51).. That vehicle uses Anti-skid actuator & ECU assembly. We repair it as part of the Nissan / Infiniti ABS actuator and ECU family, from $499.
Still not sure?
Send us C1130, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
C1130 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com