ABS Module Lab

Nissan · 2008-2013 · Nissan actuator

Nissan Rogue (S35) ABS module repair

Mail in your Nissan Rogue (S35) ABS module with our prepaid label. It comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

  • Unit: Nissan actuator
  • Stability control: depends on trim
  • 4 sourced part numbers
  • 6 fault codes

The ABS module in the Nissan Rogue (S35)

The 2008-2013 Nissan Rogue (S35) uses this ABS unit: Anti-skid actuator assembly. source ↗ On our bench that puts it in the Nissan / Infiniti ABS actuator and ECU family, alongside 9 other vehicle lines on this site.

Its ABS module appears under 4 part numbers, starting with 47660-JM21C (Anti Skid Actuator Assembly; 2008-2013 Rogue S/SL/SV 2.5 (QR25DE); replaces 47660-JM17B, -JM19C, -JM17C). source ↗ Different numbers usually separate model years, drivetrains and option packages — match the number on your own module label rather than the year alone. The pump, valve block and control unit are one assembly. Send us a photo before you pull it and we confirm what to ship and how to cap the ports.

Compare: a new unit

47660-JM21C listed online, part only (as of October 2026)

$1,087.06

source ↗

Repairing the one you own

From $499

Already coded to your VIN · 1-year warranty

Nissan Rogue (S35) ABS module part numbers

Match the number printed on your module's label. Each number opens its own page — the vehicles it fits, the unit and the price — and parts-catalog sources are linked.

Reading the label · Nissan / Infiniti

47660-xxxxx = 'Actuator Assy-Anti Skid' or 'Anti Skid Actuator & ECU Assembly' (ABS/VDC actuator; Nissan lookup code 47600). Second block is 5 alphanumerics, often model code + revision letter (JA32A, JM21C, 9HR0C, ZR31B, 1NC4E). source ↗

e.g. 47660-JA32A · 47660-JM21C · 47660-9HR0C

ABS fault codes on the Nissan Rogue (S35)

  • C1110

    Controller failure - internal malfunction in the ABS actuator and electric unit (control unit)

  • C1111

    ABS pump motor

  • C1140

    ABS actuator relay system

  • C1109

    Power and ground system (power supply or ground of the ABS control unit)

  • C1120

    ABS inlet (IN) valve system - C1120, C1122, C1124 and C1126 are the inlet-valve codes

  • C1130

    Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2013 Rogue (S35). source ↗

Our promise

Can’t be repaired? You don’t pay for a repair.

If the bench finds your module past repair, we stop and tell you before doing anything else. Then you choose:

  1. 1A replacement — a refurbished unit of the same family with your VIN, coding and configuration cloned onto it, from $950. You pay only the difference from what you already paid, and we confirm the amount with you first.
  2. 2Your module back — with the repair price refunded, minus shipping costs and a $150 bench evaluation fee.

Either way, nothing that changes your price happens without your OK.

Refund stages in our terms →

Other vehicles with the Nissan actuator

Same unit family, same bench process and the same starting price.

All Nissan / Infiniti ABS actuator and ECU vehicles →

Nissan Rogue (S35) ABS module questions

Which ABS module is in the Nissan Rogue (S35)?

It uses this unit: Anti-skid actuator assembly. We price and bench it as part of the Nissan / Infiniti ABS actuator and ECU family. The exact unit is confirmed from your module label on arrival.

How much does ABS module repair cost for a Nissan Rogue (S35)?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new part (47660-JM21C) is listed online at $1,087.06 for the part alone, as of October 2026. Return shipping starts at $29.95 and the label to us is prepaid.

My Nissan Rogue (S35) module number is not listed. Can you still repair it?

The 4 numbers above are the ones we could source, not every one that exists. Send us a photo of the label first, or order the repair and we confirm the unit before any work.

Repair guides

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

Nissan Rogue (S35) ABS light on? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair