C24DB
ABS / stability-control fault code, listed for 1 vehicle line from Mercedes-Benz. What it means on each one, from published sources, and when the module is the cause.
What C24DB means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of C24DB | Source |
|---|---|---|
| 2003-2012 Mercedes-Benz E-Class sedan/wagon (W211/S211, pre-facelift) | CAN communication fault - typically mismatched part numbers after a unit swap | on file |
Vehicles and units that set C24DB
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Mercedes-Benz E-Class sedan/wagon (W211/S211, pre-facelift) | 2003-2012 | Mercedes-Benz SBC (Sensotronic Brake Control) | Quote | 11 |
What is published about failures on these lines
- 2003-2012 Mercedes-Benz E-Class sedan/wagon (W211/S211, pre-facelift): The SBC hydraulic unit wears out by design: it counts brake actuations and logs C249F at roughly 300,000; failures progress from a grey 'Service Brake! Visit Workshop!' (backup mode) to a red brake warning, softer pedal and excessive pump noise. Bosch stopped producing SBC units around 2012, so there are no brand-new replacements.
Is C24DB the ABS module?
C24DB is listed for 1 vehicle line from Mercedes-Benz; the meanings above fall under the “Communication — no response from the ABS module” family of codes.
This family of codes says the ABS module is not answering on the vehicle’s network: a scan tool cannot connect to it, or another module (engine, instrument cluster, body) stores a “lost communication” U-code about it. The ABS module may be dead, its network transceiver may have failed, or it may be fine and unreachable because it has no power, no ground, or a broken network wire. Which of those it is decides whether the module needs repair.
Is the module the likely cause? Often
For this family of codes the module is a likely cause, but not the only one. When every other module on the network answers and only the ABS module is silent, and its power, ground and network pins are good at its connector, the module itself is the likely cause — its power supply or network transceiver has failed. A blown fuse, a corroded ground, a connector pin pushed out, or a network wire chafed through sets the same code from outside, so those come first.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Try to connect to the ABS module directly with a scan tool, and check which other modules answer — if several are missing, the fault is in the network or the power to that area, not in the ABS module.
- Back-probe the module connector for battery voltage on its power pins, ignition voltage with the key on, and a good ground on the ground pins.
- Check the network wires (CAN high and low) at the module connector for the expected pair resistance with the battery disconnected, and look for chafing where the harness passes the frame or the brake lines.
- Read the codes in the other modules: a U-code about the ABS module alone points at the ABS module; U-codes about several modules point at the network.
- If power, ground and network wiring are good at the connector and the module still does not answer, stop there — the module is the remaining cause.
What the lab does for a code in this family
At the bench we power the module and talk to it over its network pins; a module that does not answer gets its power supply and network transceiver repaired, then the full bench test. A module that is silent in the car can still give up its data on the bench, which is what lets a refurbished unit be cloned when a repair is not possible.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Mercedes-Benz SBC (Sensotronic Brake Control)1 vehicle line on this pageQuoted first — send a label photo
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
- A quoted-first unit is confirmed from your label photo and VIN before anything ships — the quote is free.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to C24DB.
- C14BE1 shared vehicle lineControl module internal fault
- C21311 shared vehicle linePump motor, motor relay or relay circuit
- C226F1 shared vehicle lineControl module internal fault
- C22EF1 shared vehicle lineControl module internal fault
- C235A1 shared vehicle lineOther system-level codes
- C235C1 shared vehicle lineOther system-level codes
- C235D1 shared vehicle lineOther system-level codes
- C24981 shared vehicle lineOther system-level codes
C24DB — questions
What does C24DB mean on a Mercedes-Benz?
On the Mercedes-Benz line in our data, C24DB is listed as: CAN communication fault - typically mismatched part numbers after a unit swap. In general terms it belongs to the “Communication — no response from the ABS module” family — other modules cannot talk to the ABS module, or it is missing from the vehicle network.
Can I drive with C24DB?
With no communication, the ABS and stability control are off, and other systems that use the wheel speeds — cruise control, hill-start assist, some transmissions and speedometers — can act up too. The base brakes keep working. If the speedometer or the transmission is affected, have the vehicle checked where it sits. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is C24DB the ABS module or a sensor?
For this family of codes the module is a likely cause, but not the only one. When every other module on the network answers and only the ABS module is silent, and its power, ground and network pins are good at its connector, the module itself is the likely cause — its power supply or network transceiver has failed. A blown fuse, a corroded ground, a connector pin pushed out, or a network wire chafed through sets the same code from outside, so those come first.
How much does it cost to fix C24DB?
The Mercedes-Benz SBC (Sensotronic Brake Control) line is quoted first — send a photo of the module label and your VIN and we confirm the work and the price before anything ships. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will C24DB clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Still not sure?
Send us C24DB, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
C24DB keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com