ABS Module Lab

ABS module part number · Toyota actuator · Toyota / Lexus format

44050-02440 — ABS module part number(Toyota Corolla (E140, US), 2009-2013)

44050-02440 is listed for the 2009-2013 Toyota Corolla (E140, US). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

  • Unit: Toyota actuator
  • 1 vehicle line
  • 6 fault codes

Vehicles that use 44050-02440

Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.

MakeModelYearsUnit familyNote
ToyotaCorolla (E140, US)2009-2013Toyota / Lexus brake actuator (ABS / VSC)ACTUATOR Assembly, Brake; 2009-2011 Corolla 1.8/2.4, note 'VSC-WITH (W/CUT OFF SW) V2P' source ↗

What this number tells you

Label format · Toyota / Lexus

Five characters, a dash, five more (44050-06070). 44050 is Toyota’s number for the brake actuator assembly — the ABS/VSC hydraulic actuator, usually with the skid-control ECU and pump; 44540 and 44500 numbers are actuator-with-pump variants. source ↗

e.g. 44050-06070 · 44050-0C430 · 44050-42B21 · 44540-06010

Spaces, dots and dashes do not matter: 44050-02440 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.

Known failures on this unit

What brings a Toyota actuator to the bench, in general terms:

  • ●ABS, traction and stability warning lights on together
  • ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
  • ●Pump-motor or valve (solenoid) circuit codes that return after clearing
  • ●Intermittent faults that come and go with temperature or bumps
  • ●Wheel-speed signal codes on more than one wheel at once

Fault codes seen on these vehicles

As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.

CodeMeaningVehicle
C1241Low power supply voltage malfunction (ABS/VSC control unit supply voltage too low) source ↗Toyota Corolla (E140, US)
C0226SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits Toyota Corolla (E140, US)
C0273Open circuit in the ABS motor relay circuit (the relay that supplies power to the ABS pump motor); C0274 is a B+ short in the same circuit Toyota Corolla (E140, US)
C0278Open circuit in the ABS solenoid relay circuit (the relay that supplies power to the ABS solenoids); C0279 is a short in the same circuit Toyota Corolla (E140, US)
C1201Engine control system malfunction (VSC-equipped cars) source ↗Toyota Corolla (E140, US)
C1223ABS control system malfunction (VSC-equipped cars) source ↗Toyota Corolla (E140, US)

Repair or refurbished: your options for 44050-02440

Both come back ready to install, with the same warranty.

  • Repair your 44050-02440

    From $499

    + return shipping

    • Your own module, repaired and tested on the bench
    • Keeps your VIN and coding — it is your module
    • About 1 week on the bench; rush 2–3 business days for +$100
    • 1-year warranty on our work, from the day we ship it back
    Start my repair →
  • Refurbished unit with your data

    From $950

    + return shipping

    • A refurbished unit of the same family, tested on the bench
    • Your VIN, coding and configuration written in from your original
    • Your original stays with us as the core — no separate core charge.
    • About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives

    No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.

Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.

What to ship

Ship the whole unit (pump, valve block and control unit are one piece); send a photo first and we confirm how to cap the ports.

Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.

Related part numbers

Other numbers on the same vehicle lines — the closest to 44050-02440 first.

All Toyota part numbers →

44050-02440 questions

Can 44050-02440 be repaired instead of replaced?

Yes — that is the service. Mail in your 44050-02440 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.

Which vehicles use 44050-02440?

It is listed for the 2009-2013 Toyota Corolla (E140, US). The note on file reads: ACTUATOR Assembly, Brake; 2009-2011 Corolla 1.8/2.4, note 'VSC-WITH (W/CUT OFF SW) V2P'. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.

Will I need programming after the repair?

Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.

How much does the 44050-02440 repair cost?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.

What if it cannot be repaired?

If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

44050-02440 on your label? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair