C0226
ABS / stability-control fault code, listed for 11 vehicle lines from Toyota. What it means on each one, from published sources, and when the module is the cause.
What C0226 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of C0226 | Source |
|---|---|---|
| 2002-2006 Toyota Camry (XV30) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS & traction actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2004-2017 Toyota Sienna (XL20, XL30) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2005-2015 Toyota Tacoma (2nd gen) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2006-2012 Toyota RAV4 (XA30) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2007-2011 Toyota Camry (XV40, non-hybrid) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2007-2013 Toyota Tundra (2nd gen) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2009-2013 Toyota Corolla (E140, US) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2010-2020 Toyota 4Runner (N280) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2012-2017 Toyota Camry (XV50, non-hybrid) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
| 2013-2018 Toyota RAV4 (XA40) | Brake actuator solenoid circuit - C0226, C0236, C0246, C0256 and C1225 are the solenoid-circuit codes | on file |
| 2014-2019 Toyota Corolla (E170, US) | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | on file |
Vehicles and units that set C0226
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Toyota Camry (XV30) | 2002-2006 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 4 |
| Toyota Sienna (XL20, XL30) | 2004-2017 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 4 |
| Toyota Tacoma (2nd gen) | 2005-2015 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 3 |
| Toyota RAV4 (XA30) | 2006-2012 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 6 |
| Toyota Camry (XV40, non-hybrid) | 2007-2011 | Bosch ABS / ESP 8 | From $499 | 8 |
| Toyota Tundra (2nd gen) | 2007-2013 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 15 |
| Toyota Corolla (E140, US) | 2009-2013 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 3 |
| Toyota 4Runner (N280) | 2010-2020 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 1 |
| Toyota Camry (XV50, non-hybrid) | 2012-2017 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 1 |
| Toyota RAV4 (XA40) | 2013-2018 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 2 |
| Toyota Corolla (E170, US) | 2014-2019 | Toyota / Lexus brake actuator (ABS / VSC) | From $499 | 1 |
What is published about failures on these lines
- 2005-2015 Toyota Tacoma (2nd gen): Toyota's own C1241 trouble-area list puts the battery, charging system and wiring ahead of the skid control ECU/brake actuator - many 'bad module' Tacomas are a low-voltage fault. source ↗
- 2007-2011 Toyota Camry (XV40, non-hybrid): Fine wires inside the Bosch 8.1 module detach from the circuit board, causing intermittent gauges, warning lights and loss of communication (U0073).
Is C0226 the ABS module?
C0226 is listed for 11 vehicle lines from Toyota; the meanings above fall under the “Valve or solenoid circuit” family of codes.
This family of codes names one of the solenoid valves inside the hydraulic block — an inlet, outlet, isolation, dump or traction-control valve for one wheel or circuit — or the relay that supplies all of them. The module checks each valve coil’s resistance and the current it draws when it fires; an open coil, a shorted coil, or a driver that cannot switch sets the code. The coils are inside the hydraulic unit and the drivers are inside the module, so there is little vehicle wiring in this circuit.
Is the module the likely cause? Often
For this family of codes the module is a likely cause, but not the only one. On a valve code there is almost nothing between the module and the fault: the coil is in the hydraulic block it bolts to, the driver and the valve-relay function are on the module’s board, and the connection between them is a set of spring pins or solder joints that corrode and crack. The outside causes — low supply voltage, a bad ground, a connector pin — are quick to rule out.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Read the code’s valve position (which wheel, inlet or outlet) and note whether more than one valve code is stored; several at once point at the common supply or the module, not at one coil.
- If the unit has a plug-in valve relay, swap it with an identical one; if the relay is inside the module, it is bench work.
- On a one-piece unit do not open the hydraulic block or loosen brake lines to look — the valves are not serviceable from outside, and air in the system means a bleed with a scan tool afterward.
- A valve code that sets the moment the key is turned on is an electrical fault, not a driving condition: if the supply, ground and connector are good and it returns, stop there — coil, driver and the connection between them are all inside the unit.
What the lab does for a code in this family
At the bench we separate the control unit from the hydraulic block where the design allows it, test each valve coil, repair the driver circuits and the board-to-coil connections, and run every valve from the module’s own drivers before it ships back. If a coil inside the hydraulic block itself is open, we tell you before anything beyond the repair price is done.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Toyota / Lexus brake actuator (ABS / VSC)10 vehicle lines on this pageRepair from $499 · refurbished unit with your data from $950
- Bosch ABS / ESP 81 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to C0226.
- C124111 shared vehicle linesSupply voltage to the module
- C027311 shared vehicle linesPump motor, motor relay or relay circuit
- C027811 shared vehicle linesPump motor, motor relay or relay circuit
- C120110 shared vehicle linesOther system-level codes
- C122310 shared vehicle linesOther system-level codes
- C02101 shared vehicle lineWheel-speed sensor circuit
- C12381 shared vehicle lineWheel-speed signal implausible or erratic
- C13361 shared vehicle lineStability-control sensors and calibration
C0226 — questions
What does C0226 mean on a Toyota?
On the Toyota lines in our data, C0226 is listed as: SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits. In general terms it belongs to the “Valve or solenoid circuit” family — one of the solenoid valves inside the hydraulic unit, or the circuit that drives it.
Can I drive with C0226?
With a valve fault stored the module switches ABS (and with it traction and stability control) off; the base brakes keep working. If the pedal feels different, the car pulls under braking or a wheel drags or runs hot, do not drive it — a stuck valve can hold pressure at one wheel. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is C0226 the ABS module or a sensor?
For this family of codes the module is a likely cause, but not the only one. On a valve code there is almost nothing between the module and the fault: the coil is in the hydraulic block it bolts to, the driver and the valve-relay function are on the module’s board, and the connection between them is a set of spring pins or solder joints that corrode and crack. The outside causes — low supply voltage, a bad ground, a connector pin — are quick to rule out.
How much does it cost to fix C0226?
Repair of your own module starts at $499 for the vehicles that set C0226; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will C0226 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Which vehicles set C0226?
In our data C0226 is listed for 11 vehicle lines from Toyota: 2010-2020 Toyota 4Runner (N280), 2002-2006 Toyota Camry (XV30), 2007-2011 Toyota Camry (XV40, non-hybrid), 2012-2017 Toyota Camry (XV50, non-hybrid) and 7 more. The table above gives the meaning for each line and the unit family it uses.
Still not sure?
Send us C0226, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
C0226 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com