ABS Module Lab

Toyota · 2007-2011 · Bosch 8

Toyota Camry (XV40, non-hybrid) ABS module repair

Mail in your Toyota Camry (XV40, non-hybrid) ABS module with our prepaid label. It comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

  • Unit: Bosch 8
  • Stability control: depends on trim
  • 8 sourced part numbers
  • 7 fault codes

Known failure

Fine wires inside the Bosch 8.1 module detach from the circuit board, causing intermittent gauges, warning lights and loss of communication (U0073).

The ABS module in the Toyota Camry (XV40, non-hybrid)

The 2007-2011 Toyota Camry (XV40, non-hybrid) uses this ABS unit: Bosch ABS 8.1 (vehicles without VSC). The same unit covers the Camry (XV40, non-hybrid) and Avalon (2005-2008, w/o VSC). On our bench that puts it in the Bosch ABS / ESP 8 family, alongside 14 other vehicle lines on this site.

Its ABS module appears under 8 part numbers, starting with 44050-06070 (ACTUATOR Assembly, Brake; 2007-2010 Camry LE/SE/XLE 2.4/2.5/3.5 (an OEM parts catalog fitment)). source ↗ Different numbers usually separate model years, drivetrains and option packages — match the number on your own module label rather than the year alone. The control unit is mounted on the valve block. On many units it unbolts, so the brake lines stay on — send us a photo if you are not sure.

Compare: a new unit

44050-06070 listed online, part only (as of October 2026)

$1,135.82

source ↗

Repairing the one you own

From $499

Already coded to your VIN · 1-year warranty

Toyota Camry (XV40, non-hybrid) ABS module part numbers

Match the number printed on your module's label. Each number opens its own page — the vehicles it fits, the unit and the price — and parts-catalog sources are linked.

Reading the label · Toyota / Lexus

Five characters, a dash, five more (44050-06070). 44050 is Toyota’s number for the brake actuator assembly — the ABS/VSC hydraulic actuator, usually with the skid-control ECU and pump; 44540 and 44500 numbers are actuator-with-pump variants. source ↗

e.g. 44050-06070 · 44050-0C430 · 44050-42B21

Reading the label · Bosch (supplier number, all brands)

10-digit Bosch number on a white label.

e.g. 0 265 950 080 · 0265950958 · 0 273 004 358

ABS fault codes on the Toyota Camry (XV40, non-hybrid)

  • U0073

    No communication (control module communication bus off)

  • C1241

    Low power supply voltage malfunction (ABS/VSC control unit supply voltage too low) source ↗

  • C0226

    SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits

  • C0273

    Open circuit in the ABS motor relay circuit (the relay that supplies power to the ABS pump motor); C0274 is a B+ short in the same circuit

  • C0278

    Open circuit in the ABS solenoid relay circuit (the relay that supplies power to the ABS solenoids); C0279 is a short in the same circuit

  • C1201

    Engine control system malfunction (VSC-equipped cars) source ↗

  • C1223

    ABS control system malfunction (VSC-equipped cars) source ↗

Our promise

Can’t be repaired? You don’t pay for a repair.

If the bench finds your module past repair, we stop and tell you before doing anything else. Then you choose:

  1. 1A replacement — a refurbished unit of the same family with your VIN, coding and configuration cloned onto it, from $950. You pay only the difference from what you already paid, and we confirm the amount with you first.
  2. 2Your module back — with the repair price refunded, minus shipping costs and a $150 bench evaluation fee.

Either way, nothing that changes your price happens without your OK.

Refund stages in our terms →

Other vehicles with the Bosch 8

Same unit family, same bench process and the same starting price.

All Bosch ABS / ESP 8 vehicles →

Toyota Camry (XV40, non-hybrid) ABS module questions

Which ABS module is in the Toyota Camry (XV40, non-hybrid)?

It uses this unit: Bosch ABS 8.1 (vehicles without VSC). We price and bench it as part of the Bosch ABS / ESP 8 family. The exact unit is confirmed from your module label on arrival.

How much does ABS module repair cost for a Toyota Camry (XV40, non-hybrid)?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new part (44050-06070) is listed online at $1,135.82 for the part alone, as of October 2026. Return shipping starts at $29.95 and the label to us is prepaid.

My Toyota Camry (XV40, non-hybrid) module number is not listed. Can you still repair it?

The 8 numbers above are the ones we could source, not every one that exists. Send us a photo of the label first, or order the repair and we confirm the unit before any work.

Repair guides

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

Toyota Camry (XV40, non-hybrid) ABS light on? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair