ABS module part number · Toyota actuator · Toyota / Lexus format
44050-06170 — ABS module part number(Toyota Camry (XV50, non-hybrid), 2012-2017)
44050-06170 is listed for the 2012-2017 Toyota Camry (XV50, non-hybrid). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Toyota actuator
- 1 vehicle line
- 6 fault codes
Vehicles that use 44050-06170
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Toyota | Camry (XV50, non-hybrid) | 2012-2017 | Toyota / Lexus brake actuator (ABS / VSC) | ACTUATOR Assembly, Brake; 2012-2015 Camry LE/N/SE/XLE/XSE 2.5 (2ARFE/2ARFXE) and 3.5 (2GRFE); chassis ASV50L/AVV50L/GSV50L source ↗ |
What this number tells you
Label format · Toyota / Lexus
Five characters, a dash, five more (44050-06070). 44050 is Toyota’s number for the brake actuator assembly — the ABS/VSC hydraulic actuator, usually with the skid-control ECU and pump; 44540 and 44500 numbers are actuator-with-pump variants. source ↗
e.g. 44050-06070 · 44050-0C430 · 44050-42B21 · 44540-06010
Spaces, dots and dashes do not matter: 44050-06170 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Known failures on this unit
What brings a Toyota actuator to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C1241 | Low power supply voltage malfunction (ABS/VSC control unit supply voltage too low) source ↗ | Toyota Camry (XV50, non-hybrid) |
| C1201 | Engine control system malfunction source ↗ | Toyota Camry (XV50, non-hybrid) |
| C1223 | ABS control system malfunction source ↗ | Toyota Camry (XV50, non-hybrid) |
| C0226 | SFR solenoid circuit - open or short in the SFRH or SFRR solenoid circuit of the ABS actuator; C0236, C0246 and C0256 are the SFL, SRR and SRL solenoid circuits | Toyota Camry (XV50, non-hybrid) |
| C0273 | Open circuit in the ABS motor relay circuit (the relay that supplies power to the ABS pump motor); C0274 is a B+ short in the same circuit | Toyota Camry (XV50, non-hybrid) |
| C0278 | Open circuit in the ABS solenoid relay circuit (the relay that supplies power to the ABS solenoids); C0279 is a short in the same circuit | Toyota Camry (XV50, non-hybrid) |
Repair, refurbished or new: your options for 44050-06170
The new-part price is the part alone, from an online parts catalog, as of October 2026.
Repair your 44050-06170
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
New 44050-06170 (part only)
$1,152.98
catalog price, as of October 2026 source ↗
- A new unit from a parts catalog — the part alone
- Not coded to your vehicle — set up after install per the maker's procedure
- Shipping time and warranty as the parts catalog states them
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
Ship the whole unit (pump, valve block and control unit are one piece); send a photo first and we confirm how to cap the ports.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
44050-06170 questions
Can 44050-06170 be repaired instead of replaced?
Yes — that is the service. Mail in your 44050-06170 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 44050-06170?
It is listed for the 2012-2017 Toyota Camry (XV50, non-hybrid). The note on file reads: ACTUATOR Assembly, Brake; 2012-2015 Camry LE/N/SE/XLE/XSE 2.5 (2ARFE/2ARFXE) and 3.5 (2GRFE); chassis ASV50L/AVV50L/GSV50L. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 44050-06170 repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new 44050-06170 is listed at $1,152.98 for the part alone (catalog price as of October 2026). Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
44050-06170 on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair