ABS module part number · Nissan actuator · Nissan / Infiniti format
47660-1NF8C — ABS module part number(Infiniti G35 sedan (V36), 2007-2013)
47660-1NF8C is listed for the 2007-2013 Infiniti G35 sedan (V36). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Nissan actuator
- 1 vehicle line
- 4 fault codes
- Replaces an earlier number
Vehicles that use 47660-1NF8C
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Infiniti | G35 sedan (V36) | 2007-2013 | Nissan / Infiniti ABS actuator and ECU | Replaces 47660-1NC4E source ↗ |
What this number tells you
Label format · Nissan / Infiniti
47660-xxxxx = 'Actuator Assy-Anti Skid' or 'Anti Skid Actuator & ECU Assembly' (ABS/VDC actuator; Nissan lookup code 47600). Second block is 5 alphanumerics, often model code + revision letter (JA32A, JM21C, 9HR0C, ZR31B, 1NC4E). source ↗
e.g. 47660-JA32A · 47660-JM21C · 47660-9HR0C · 47660-ZR31B
Spaces, dots and dashes do not matter: 47660-1NF8C is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Replaced or replacing
47660-1NF8C is listed as replacing 47660-1NC4E.
Either number goes on the same bench at the same price — send the one printed on your label.
Known failures on this unit
What brings a Nissan actuator to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C1111 | ABS pump motor source ↗ | Infiniti G35 sedan (V36) |
| C1109 | Power and ground system (power supply or ground of the ABS control unit) source ↗ | Infiniti G35 sedan (V36) |
| C1140 | ABS actuator relay source ↗ | Infiniti G35 sedan (V36) |
| C1130 | Engine signal - the ABS control unit does not recognise an output signal from the ECM; diagnose and clear the engine (P) codes first. Applies to the 2012-2013 G37 sedan, coupe and convertible (V36). source ↗ | Infiniti G35 sedan (V36) |
Repair or refurbished: your options for 47660-1NF8C
Both come back ready to install, with the same warranty.
Repair your 47660-1NF8C
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
Ship the whole unit (pump, valve block and control unit are one piece); send a photo first and we confirm how to cap the ports.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 47660-1NF8C first.
- 47660-1NC4E2007-2013 Infiniti G35 sedan (V36)
- 47660-JK20B2007-2013 Infiniti G35 sedan (V36)
- 47660-JK05B2007-2013 Infiniti G35 sedan (V36)
- 47660-JK10A2007-2013 Infiniti G35 sedan (V36)
47660-1NF8C questions
Can 47660-1NF8C be repaired instead of replaced?
Yes — that is the service. Mail in your 47660-1NF8C module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 47660-1NF8C?
It is listed for the 2007-2013 Infiniti G35 sedan (V36). The note on file reads: Replaces 47660-1NC4E. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 47660-1NF8C repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
47660-1NF8C on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair