ABS Module Lab

ABS module part number · MK25 · Mopar format

68004830AA — ABS module part number(Jeep Grand Cherokee (WK), 2005-2010)

68004830AA is listed for the 2005-2010 Jeep Grand Cherokee (WK). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

  • Unit: MK25
  • 1 vehicle line
  • 4 fault codes
  • Replaced by a later number

Vehicles that use 68004830AA

Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.

MakeModelYearsUnit familyNote
JeepGrand Cherokee (WK)2005-2010ATE / Continental MK25Mopar ABS module, 2007 Grand Cherokee incl. 3.0L diesel and SRT8; replaced by 68004830AD source ↗

What this number tells you

Label format · Mopar (Chrysler / Dodge / Jeep / Ram) - current 68xxxxxx

Eight digits followed by a two-letter revision suffix, e.g. 68259556AD. AA is the original release and the suffix advances AB, AC... as the part is revised. source ↗

e.g. 68259556AD · 68067457AA · 68438389AB · 68145835AC

Spaces, dots and dashes do not matter: 68004830AA is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.

Replaced or replacing

68004830AA is listed as replaced by 68004830AD.

Either number goes on the same bench at the same price — send the one printed on your label.

Known failures on this unit

What brings a MK25 to the bench, in general terms:

  • ●ABS, traction and stability warning lights on together
  • ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
  • ●Pump-motor or valve (solenoid) circuit codes that return after clearing
  • ●Intermittent faults that come and go with temperature or bumps
  • ●Wheel-speed signal codes on more than one wheel at once
  • 2005-2010 Jeep Grand Cherokee (WK)

    'C2200 - control module internal fault' and 'No communication with ABS control module' for its 2010-2016 multi-Jeep control-module repair; its 2006-2016 pump repair lists low-voltage faults, pump motor power-supply faults, pump motor fault, no communication, faulty control module and pressure sensor faults.

Fault codes seen on these vehicles

As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.

CodeMeaningVehicle
C2200ABS control module internal fault Jeep Grand Cherokee (WK)
C2116ABS Pump Motor Supply Low Voltage Jeep Grand Cherokee (WK)
C2200-49Anti-Lock Brake Module Internal Fault Jeep Grand Cherokee (WK)
U0121Lost communication with ABS Module Jeep Grand Cherokee (WK)

Repair or refurbished: your options for 68004830AA

Both come back ready to install, with the same warranty.

  • Repair your 68004830AA

    From $499

    + return shipping

    • Your own module, repaired and tested on the bench
    • Keeps your VIN and coding — it is your module
    • About 1 week on the bench; rush 2–3 business days for +$100
    • 1-year warranty on our work, from the day we ship it back
    Start my repair →
  • Refurbished unit with your data

    From $950

    + return shipping

    • A refurbished unit of the same family, tested on the bench
    • Your VIN, coding and configuration written in from your original
    • Your original stays with us as the core — no separate core charge.
    • About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives

    No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.

Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.

What to ship

Ship the control unit; on many units it unbolts from the valve block so the brake lines stay on.

Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.

Related part numbers

Other numbers on the same vehicle lines — the closest to 68004830AA first.

All Jeep part numbers →

68004830AA questions

Can 68004830AA be repaired instead of replaced?

Yes — that is the service. Mail in your 68004830AA module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.

Which vehicles use 68004830AA?

It is listed for the 2005-2010 Jeep Grand Cherokee (WK). The note on file reads: Mopar ABS module, 2007 Grand Cherokee incl. 3.0L diesel and SRT8; replaced by 68004830AD. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.

Will I need programming after the repair?

Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.

How much does the 68004830AA repair cost?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.

What if it cannot be repaired?

If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

68004830AA on your label? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair