ABS module part number · Mopar format
68139770AA — ABS module part number(Dodge Durango (WD), 2011-2020 and 1 more)
68139770AA is listed for the 2011-2020 Dodge Durango (WD) and 1 more vehicle line. Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: confirmed from the label
- 2 vehicle lines
- 8 fault codes
- Replaced by a later number
Vehicles that use 68139770AA
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Dodge | Durango (WD) | 2011-2020 | Confirmed from the label | Mopar ABS module, 2011-2012 Durango; replaced by 68139770AB source ↗ |
| Jeep | Grand Cherokee (WK2) | 2011-2021 | Confirmed from the label | Mopar ABS module, 2012 Grand Cherokee 3.6L/5.7L; replaced by 68139770AB source ↗ |
What this number tells you
Label format · Mopar (Chrysler / Dodge / Jeep / Ram) - current 68xxxxxx
Eight digits followed by a two-letter revision suffix, e.g. 68259556AD. AA is the original release and the suffix advances AB, AC... as the part is revised. source ↗
e.g. 68259556AD · 68067457AA · 68438389AB · 68145835AC
Spaces, dots and dashes do not matter: 68139770AA is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Replaced or replacing
68139770AA is listed as replaced by 68139770AB.
Either number goes on the same bench at the same price — send the one printed on your label.
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C2100 | Battery (supply) voltage low | Dodge Durango (WD) · Jeep Grand Cherokee (WK2) |
| C2101 | Battery voltage high source ↗ | Dodge Durango (WD) · Jeep Grand Cherokee (WK2) |
| C2112 | Sensor supply 1 voltage circuit high source ↗ | Dodge Durango (WD) |
| C2200 | Anti-Lock Brake Module Internal Fault | Jeep Grand Cherokee (WK2) |
| C2200-49 | Anti-Lock Brake Module Internal Fault | Jeep Grand Cherokee (WK2) |
| U0121 | Lost communication with ABS Module | Jeep Grand Cherokee (WK2) |
| C2116 | Pump Motor Fault / Pump Supply Low Voltage | Jeep Grand Cherokee (WK2) |
| U0415 | Invalid data from the ABS module | Jeep Grand Cherokee (WK2) |
Repair or refurbished: your options for 68139770AA
Both come back ready to install, with the same warranty.
Repair your 68139770AA
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 68139770AA first.
- 68139770AB2011-2020 Dodge Durango (WD)
- 68139769AA2011-2020 Dodge Durango (WD)
- 68139769AB2011-2021 Jeep Grand Cherokee (WK2)
- 68157062AA2011-2020 Dodge Durango (WD)
- 68157062AB2011-2020 Dodge Durango (WD)
- 68157064AB2011-2020 Dodge Durango (WD)
- 68199249AF2011-2020 Dodge Durango (WD)
- 68157064AA2011-2021 Jeep Grand Cherokee (WK2)
- 68199237AF2011-2021 Jeep Grand Cherokee (WK2)
- 68199249AC2011-2021 Jeep Grand Cherokee (WK2)
- 68199249AD2011-2021 Jeep Grand Cherokee (WK2)
- 68085396AB2011-2020 Dodge Durango (WD)
68139770AA questions
Can 68139770AA be repaired instead of replaced?
Yes — that is the service. Mail in your 68139770AA module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 68139770AA?
It is listed for the 2011-2020 Dodge Durango (WD) and 2011-2021 Jeep Grand Cherokee (WK2). The note on file reads: Mopar ABS module, 2011-2012 Durango; replaced by 68139770AB. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 68139770AA repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
68139770AA on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair