00290
ABS / stability-control fault code, listed for 1 vehicle line from Volkswagen. What it means on each one, from published sources, and when the module is the cause.
What 00290 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of 00290 | Source |
|---|---|---|
| 2006-2018 Volkswagen Golf / Rabbit / GTI / Golf R (Mk5-Mk6) | L/F, R/F, L/R, R/R Wheel Speed Sensor: Implausible Signal | on file |
Vehicles and units that set 00290
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Volkswagen Golf / Rabbit / GTI / Golf R (Mk5-Mk6) | 2006-2018 | ATE / Continental MK60 / MK61 | From $499 | 16 |
What is published about failures on these lines
- 2006-2018 Volkswagen Golf / Rabbit / GTI / Golf R (Mk5-Mk6): Faults relating to the ABS motor, block and pump cause the VW Golf, Audi A3 and TT ABS light to remain on, and 'ABS pump and module failure is caused by internal component breakdown'
Is 00290 the ABS module?
00290 is listed for 1 vehicle line from Volkswagen; the meanings above fall under the “Wheel-speed signal implausible or erratic” family of codes.
This family of codes means the module is getting a wheel-speed signal, but not one it can believe: it drops out over bumps, disagrees with the other wheels, or has the wrong shape. The circuit may well test fine with a meter, because the fault is in what the signal carries — a damaged or dirty tone ring, a sensor sitting too far from it, a mismatched tire size, or a connection that only opens when the suspension moves.
Is the module the likely cause? Rarely
For this family of codes the module is rarely the cause. A signal the module can read but does not believe points at the wheel end: the tone ring or encoder, the sensor’s air gap, debris on the sensor tip, tire sizes, or a wire that opens when it flexes. The module is considered when the same implausible signal is reported on more than one wheel at once, or when everything at the wheel end has been checked and the code still sets.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Compare all four wheel speeds on a scan tool while driving slowly over a bumpy stretch — the bad one drops to zero or jumps while the others stay steady.
- Pull the sensor and look at its tip for metal filings or rust, then inspect the tone ring or the bearing’s magnetic encoder all the way around: cracks, a missing tooth, a ring that has slipped on the axle, rust packed between the teeth.
- Check tire sizes and pressures on all four corners, and whether a spare or a different-size tire is fitted — the module compares the wheels against each other.
- Flex the harness along its route, especially where it passes the strut or the frame, while watching the live reading; a wire that opens when it moves shows up as a dropout.
- If the code is reported on more than one wheel and the wheel ends are good, stop and have the module looked at — that pattern points at the module’s input stage.
What the lab does for a code in this family
At the bench we feed every wheel-speed input a clean simulated signal and repair the input circuits and board connections that read as intermittent or implausible; if the tone ring, sensor, bearing or harness is the cause, a repaired module will not change the code.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- ATE / Continental MK60 / MK611 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to 00290.
- 011301 shared vehicle lineMaker-specific flash and group codes
- 012761 shared vehicle linePump motor, motor relay or relay circuit
- 163521 shared vehicle lineControl module internal fault
- 01316:0131 shared vehicle lineCommunication — no response from the ABS module
- 006681 shared vehicle lineSupply voltage to the module
- U1017001 shared vehicle lineCommunication — no response from the ABS module
- 002831 shared vehicle lineWheel-speed signal implausible or erratic
- 002851 shared vehicle lineWheel-speed signal implausible or erratic
00290 — questions
What does 00290 mean on a Volkswagen?
On the Volkswagen line in our data, 00290 is listed as: L/F, R/F, L/R, R/R Wheel Speed Sensor: Implausible Signal. In general terms it belongs to the “Wheel-speed signal implausible or erratic” family — a wheel-speed signal that drops out, disagrees with the other wheels or is read as implausible.
Can I drive with 00290?
Expect the ABS and stability control to be switched off while the code is active, and on some vehicles a false ABS activation at low speed. Normal braking keeps working; if the pedal feels different or the red brake warning light is on, have the vehicle checked where it sits. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is 00290 the ABS module or a sensor?
For this family of codes the module is rarely the cause. A signal the module can read but does not believe points at the wheel end: the tone ring or encoder, the sensor’s air gap, debris on the sensor tip, tire sizes, or a wire that opens when it flexes. The module is considered when the same implausible signal is reported on more than one wheel at once, or when everything at the wheel end has been checked and the code still sets.
How much does it cost to fix 00290?
Repair of your own module starts at $499 for the vehicles that set 00290; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will 00290 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Still not sure?
Send us 00290, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
00290 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com