81-19
ABS / stability-control fault code, listed for 1 vehicle line from Honda. What it means on each one, from published sources, and when the module is the cause.
What 81-19 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of 81-19 | Source |
|---|---|---|
| 2009-2015 Honda Pilot (2nd gen) | Yaw rate sensor | on file |
Vehicles and units that set 81-19
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Honda Pilot (2nd gen) | 2009-2015 | Honda / Acura VSA modulator | From $499 | 10 |
What is published about failures on these lines
- 2009-2015 Honda Pilot (2nd gen): Internal solder joints between the solenoid-valve wiring and the circuit board crack after years of heat cycling, vibration and thermal stress.
Is 81-19 the ABS module?
81-19 is listed for 1 vehicle line from Honda; the meanings above fall under the “Stability-control sensors and calibration” family of codes.
This family of codes concerns the sensors that tell the stability control what the driver is asking for and what the vehicle is doing: the steering-angle sensor in the column, the yaw-rate and lateral-acceleration sensor (a separate box under a seat or the console on some vehicles, inside the ABS module on others), and the zero-point calibration that ties them together. A code here means a missing or implausible signal from one of them, or a calibration that is missing or out of range.
Is the module the likely cause? Sometimes
For this family of codes the module is one possible cause among several. The steering-angle and yaw-rate sensors are separate parts on many vehicles, with their own wiring and their own calibration procedure, and a code here points at them first. The module is the cause when the sensor sits inside the module itself, or when the sensor and wiring test good and the module still rejects the signal.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Ask what was done recently: an alignment, a steering-rack or column job, a battery disconnect or a suspension repair can leave the steering-angle sensor uncalibrated — the fix is the calibration, not a part.
- With a scan tool, watch the steering-angle reading while turning lock to lock (smooth, near zero with the wheels straight, no jumps or freezes) and the yaw-rate and lateral-acceleration readings at rest (near zero, moving when the vehicle is rocked).
- Check the sensor’s connector and the clockspring area in the steering column for a loose or corroded connection; a yaw sensor under a seat is a place for spilled drinks and kicked connectors.
- Run the zero-point or steering-angle calibration with a tool that supports your vehicle, on level ground, and see whether the code stays away.
- If the sensor reads correctly on the tool, the calibration completes and the code still returns, stop there — the module’s side of the circuit is the remaining suspect.
What the lab does for a code in this family
At the bench we test the module’s sensor inputs and the internal sensor where the unit has one, and repair the input circuits and board connections; the calibration has to be done on the vehicle after any module is installed.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Honda / Acura VSA modulator1 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to 81-19.
81-19 — questions
What does 81-19 mean on a Honda?
On the Honda line in our data, 81-19 is listed as: Yaw rate sensor. In general terms it belongs to the “Stability-control sensors and calibration” family — steering-angle, yaw-rate or acceleration sensor signals, or a calibration that was never done.
Can I drive with 81-19?
A stability-sensor fault switches the stability and traction control off; ABS and the base brakes can keep working. The vehicle drives, but without the stability help — take corners and wet roads gently and have the calibration or the sensor looked at. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is 81-19 the ABS module or a sensor?
For this family of codes the module is one possible cause among several. The steering-angle and yaw-rate sensors are separate parts on many vehicles, with their own wiring and their own calibration procedure, and a code here points at them first. The module is the cause when the sensor sits inside the module itself, or when the sensor and wiring test good and the module still rejects the signal.
How much does it cost to fix 81-19?
Repair of your own module starts at $499 for the vehicles that set 81-19; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will 81-19 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Still not sure?
Send us 81-19, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
81-19 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com