C1137
ABS / stability-control fault code, listed for 3 vehicle lines from Jaguar. What it means on each one, from published sources, and when the module is the cause.
What C1137 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of C1137 | Source |
|---|---|---|
| 1995-2003 Jaguar XK8 / XKR (X100) | Control module internal circuit failure: module ground or power circuits faulty, or module failure; the system switches off | on file |
| 2002-2007 Jaguar X-Type (X400) | ABS or DSC control module internal fault (module failure) | on file |
| 2003-2008 Jaguar S-Type (X200) | DSC module malfunction (module failure); also turns on the check-engine light | on file |
Vehicles and units that set C1137
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Jaguar XK8 / XKR (X100) | 1995-2003 | ATE / Continental MK20 | From $499 | 11 |
| Jaguar X-Type (X400) | 2002-2007 | Bosch ABS / ESP 5.7 | From $499 | — |
| Jaguar S-Type (X200) | 2003-2008 | ATE / Continental MK25 | From $499 | — |
What is published about failures on these lines
- 1995-2003 Jaguar XK8 / XKR (X100): All ABS warning lights on and ABS pump not working for the 1995-1997 Jaguar module.
Is C1137 the ABS module?
C1137 is listed for 3 vehicle lines from Jaguar; the meanings above fall under the “Control module internal fault” family of codes.
This family of codes is the module reporting on itself: its self-test found a fault in its own processor, memory, power stage, valve or pump drivers, or in the internal connections between the board and the hydraulic unit. The wording varies by maker — “internal fault”, “control module performance”, “hardware error”, “ECU defective” — but the message is the same: the module has checked the outside circuits and the problem is inside.
Is the module the likely cause? Often
For this family of codes the module is a likely cause, but not the only one. An internal code is set by the module’s own self-test, so the module is the first suspect, not the last. The exceptions are a supply problem the self-test misreads — a weak battery, a bad ground or a corroded power pin can make a module report an internal fault — and a code stored once during a jump-start or a battery change, which clears and never returns.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- A one-time internal code right after a jump-start or a battery change can be a stored event, not a fault — if it does not return after a drive, it was.
- Note what else is stored: an internal code alone is the module; an internal code with a pump or valve code names the part of the module that failed.
- Think twice before buying a used module to try: it carries another vehicle’s coding and may need the maker’s tool to match your car, and the data in your own module is what lets a refurbished unit be cloned for you.
- If the battery, power, ground and connector are good and the code returns, stop there — the fault is on the board, and that is bench work.
What the lab does for a code in this family
Internal faults are the core of the bench work: we power the module, read its fault memory, test the processor’s supplies, the drivers and the internal connections, and repair the board — then run the full bench test before it ships back with your coding intact. If the fault is in a part that cannot be repaired, you choose a refurbished unit with your data cloned onto it or your module back with the repair price refunded minus shipping and a $150 bench evaluation fee.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- ATE / Continental MK201 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- ATE / Continental MK251 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Bosch ABS / ESP 5.71 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to C1137.
- C10953 shared vehicle linesPump motor, motor relay or relay circuit
- C11453 shared vehicle linesWheel-speed sensor circuit
- C12673 shared vehicle linesValve or solenoid circuit
- C12332 shared vehicle linesWheel-speed signal implausible or erratic
- B16761 shared vehicle lineSupply voltage to the module
- C12221 shared vehicle lineWheel-speed signal implausible or erratic
- C12661 shared vehicle lineValve or solenoid circuit
C1137 — questions
What does C1137 mean on a Jaguar?
On the Jaguar lines in our data, C1137 is listed as: DSC module malfunction (module failure); also turns on the check-engine light. In general terms it belongs to the “Control module internal fault” family — the module reports a fault in its own electronics: processor, memory, drivers or internal connections.
Can I drive with C1137?
The module switches ABS and stability control off while an internal fault is active; the base brakes keep working. Some vehicles also disable cruise control or hill-start assist. If the red brake warning light is on too, have the vehicle checked before driving it. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is C1137 the ABS module or a sensor?
For this family of codes the module is a likely cause, but not the only one. An internal code is set by the module’s own self-test, so the module is the first suspect, not the last. The exceptions are a supply problem the self-test misreads — a weak battery, a bad ground or a corroded power pin can make a module report an internal fault — and a code stored once during a jump-start or a battery change, which clears and never returns.
How much does it cost to fix C1137?
Repair of your own module starts at $499 for the vehicles that set C1137; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will C1137 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Which vehicles set C1137?
In our data C1137 is listed for 3 vehicle lines from Jaguar: 2003-2008 Jaguar S-Type (X200), 2002-2007 Jaguar X-Type (X400), 1995-2003 Jaguar XK8 / XKR (X100). The table above gives the meaning for each line and the unit family it uses.
Still not sure?
Send us C1137, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
C1137 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com