ABS module part number · Mando · Hyundai / Kia format
58910-2K640 — ABS module part number(Kia Soul (AM), 2010-2013)
58910-2K640 is listed for the 2010-2013 Kia Soul (AM). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.
- Unit: Mando
- 1 vehicle line
- 4 fault codes
Vehicles that use 58910-2K640
Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.
| Make | Model | Years | Unit family | Note |
|---|---|---|---|---|
| Kia | Soul (AM) | 2010-2013 | Mando ABS / ESC | ABS anti-lock brake pump control module; 2010-2011 Soul wagon 2.0L Beta (printed 589102K640) source ↗ |
What this number tells you
Label format · Hyundai / Kia
5-5 numbers. 58920-xxxxx = hydraulic unit assembly (ABS/ESC module with pump, Hyundai/Kia part code 58910B); 58910-xxxxx = 'ABS pump control module' on some models (Soul, Santa Fe CM); NHTSA recall 23V-651 identifies the ABS module family as '58900-*****'. Kia catalogs drop the dash (589202T550). source ↗
e.g. 58920-3X950 · 58920-2T550 · 589201U000 · 58910-2K200
Spaces, dots and dashes do not matter: 58910-2K640 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.
Known failures on this unit
What brings a Mando to the bench, in general terms:
- ●ABS, traction and stability warning lights on together
- ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
- ●Pump-motor or valve (solenoid) circuit codes that return after clearing
- ●Intermittent faults that come and go with temperature or bumps
- ●Wheel-speed signal codes on more than one wheel at once
Fault codes seen on these vehicles
As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.
| Code | Meaning | Vehicle |
|---|---|---|
| C1604 | HECU hardware error: EEPROM data mismatch or abnormal RAM, register, interrupt, timer or A/D operation detected by the HECU processors; cause: faulty HECU | Kia Soul (AM) |
| C1611 | HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU | Kia Soul (AM) |
| C2112 | HECU solenoid valve relay voltage fault: open or short in the valve relay supply to the solenoid valves inside the HECU; causes: power supply circuit or HECU | Kia Soul (AM) |
| C2402 | ABS pump motor voltage fault: motor relay or fuse open, open or short in the motor, or motor lock | Kia Soul (AM) |
Repair or refurbished: your options for 58910-2K640
Both come back ready to install, with the same warranty.
Repair your 58910-2K640
From $499
+ return shipping
- Your own module, repaired and tested on the bench
- Keeps your VIN and coding — it is your module
- About 1 week on the bench; rush 2–3 business days for +$100
- 1-year warranty on our work, from the day we ship it back
Refurbished unit with your data
From $950
+ return shipping
- A refurbished unit of the same family, tested on the bench
- Your VIN, coding and configuration written in from your original
- Your original stays with us as the core — no separate core charge.
- About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives
No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.
Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.
What to ship
What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.
Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.
Related part numbers
Other numbers on the same vehicle lines — the closest to 58910-2K640 first.
- 58910-2K6002010-2013 Kia Soul (AM)
- 58910-2K6602010-2013 Kia Soul (AM)
- 58910-2K2002010-2013 Kia Soul (AM)
- 58910-2K8002010-2013 Kia Soul (AM)
- 58910-2K8602010-2013 Kia Soul (AM)
- 58910-2K8402010-2013 Kia Soul (AM)
58910-2K640 questions
Can 58910-2K640 be repaired instead of replaced?
Yes — that is the service. Mail in your 58910-2K640 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.
Which vehicles use 58910-2K640?
It is listed for the 2010-2013 Kia Soul (AM). The note on file reads: ABS anti-lock brake pump control module; 2010-2011 Soul wagon 2.0L Beta (printed 589102K640). Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.
Will I need programming after the repair?
Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.
How much does the 58910-2K640 repair cost?
Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
What if it cannot be repaired?
If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
58910-2K640 on your label? Fix the module you already own — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com
Repair From $499
Start My Repair