C1611
ABS / stability-control fault code, listed for 8 vehicle lines from Hyundai, Kia. What it means on each one, from published sources, and when the module is the cause.
What C1611 means, by vehicle
Makers reuse code numbers, so the meaning is listed per vehicle line, as its published source states it. Neutral sources (government records, parts catalogs, technical references) are linked; other sources stay on file.
| Vehicle | Meaning of C1611 | Source |
|---|---|---|
| 2010-2015 Hyundai Tucson (LM / ix35) | CAN time-out ECM: no engine control module message reaches the HECU within 500 ms | on file |
| 2011-2014 Hyundai Sonata (YF, gasoline) | CAN time-out EMS (ABS/ESC module not receiving engine-control messages) | hyundai-forums.com source ↗ |
| 2011-2015 Hyundai Elantra (MD sedan, JK coupe) | CAN time-out ECM: no engine control module message reaches the HECU within 500 ms; ESC control is switched off, ABS/EBD stay active | on file |
| 2013-2018 Hyundai Santa Fe (DM, 3-row) | CAN time-out ECM: the engine control (EMS) message does not reach the HECU's CAN controller on time; causes: engine control module or HECU | on file |
| 2010-2013 Kia Soul (AM) | HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU | on file |
| 2011-2015 Kia Optima (TF, gasoline) | HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU | on file |
| 2011-2015 Kia Sorento (XM) | HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU | on file |
| 2016-2021 Kia Sportage (QL) | HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU | on file |
Vehicles and units that set C1611
The unit family decides the price and what ships; the part-number count is how many numbers for that line are on file for the lookup.
| Vehicle | Years | ABS unit family | Repair | Part numbers |
|---|---|---|---|---|
| Hyundai Tucson (LM / ix35)Recall listed — check your VIN first | 2010-2015 | Mando ABS / ESC | From $499 | 2 |
| Hyundai Sonata (YF, gasoline) | 2011-2014 | ABS/ESC hydraulic unit assembly with integrated control module (HECU) | From $499 | 4 |
| Hyundai Elantra (MD sedan, JK coupe)Recall listed — check your VIN first | 2011-2015 | Mando ABS / ESC | From $499 | 3 |
| Hyundai Santa Fe (DM, 3-row)Recall listed — check your VIN first | 2013-2018 | Mando ABS / ESC | From $499 | 2 |
| Kia Soul (AM)Recall listed — check your VIN first | 2010-2013 | Mando ABS / ESC | From $499 | 7 |
| Kia Optima (TF, gasoline)Recall listed — check your VIN first | 2011-2015 | Mando ABS / ESC | From $499 | 2 |
| Kia Sorento (XM)Recall listed — check your VIN first | 2011-2015 | Mando ABS / ESC | From $499 | 3 |
| Kia Sportage (QL)Recall listed — check your VIN first | 2016-2021 | Mando ABS / ESC | From $499 | 2 |
What is published about failures on these lines
- 2010-2015 Hyundai Tucson (LM / ix35) — safety recall on this unit: NHTSA recall 23V-651 covers 170,402 model-year 2010-2013 Tucson: ABS module can leak brake fluid internally and short, with engine-compartment fire risk. source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2011-2015 Hyundai Elantra (MD sedan, JK coupe) — safety recall on this unit: NHTSA recall 23V-651 (2011-2015 Elantra and other Hyundais): ABS motor-shaft O-rings can leak brake fluid onto the ABS controller PCB, causing an electrical short and overcurrent that can start an engine-compartment fire; remedy = lower-amperage ABS fuse, not a new module. source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2013-2018 Hyundai Santa Fe (DM, 3-row) — safety recall on this unit: NHTSA recall 23V-651 covers 2013-2015 Santa Fe and 2013 Santa Fe Sport: brake fluid can leak past ABS motor-shaft O-rings onto the controller PCB and short it, with fire risk; remedy = lower-amperage ABS fuse. source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2010-2013 Kia Soul (AM) — safety recall on this unit: NHTSA recall 23V-652 lists 'SOUL/2011-2013': the HECU may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2011-2015 Kia Optima (TF, gasoline) — safety recall on this unit: NHTSA recall 23V-652 (2011-2015 Optima and other Kias): the Hydraulic Electronic Control Unit may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse, park outside until repaired. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2011-2015 Kia Sorento (XM) — safety recall on this unit: NHTSA recall 23V-652 covers 2011-2014 Sorento: the HECU may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2016-2021 Kia Sportage (QL) — safety recall on this unit: NHTSA recall 21V-137: the electrical circuit inside the HECU may short and draw excessive current, risking an engine-compartment fire; warnings include TPMS/ABS/MIL lights, burning smell, smoke. Cause stated as unknown; remedy = replace fuses in the junction box (plus HECU software on EPB cars). source ↗Check your VIN at nhtsa.gov/recalls first — if the recall is open on your vehicle, the dealer remedy is free.
- 2010-2015 Hyundai Tucson (LM / ix35): NHTSA recall 23V-651 covers 170,402 model-year 2010-2013 Tucson: ABS module can leak brake fluid internally and short, with engine-compartment fire risk. source ↗
- 2011-2015 Hyundai Elantra (MD sedan, JK coupe): NHTSA recall 23V-651 (2011-2015 Elantra and other Hyundais): ABS motor-shaft O-rings can leak brake fluid onto the ABS controller PCB, causing an electrical short and overcurrent that can start an engine-compartment fire; remedy = lower-amperage ABS fuse, not a new module. source ↗
- 2013-2018 Hyundai Santa Fe (DM, 3-row): NHTSA recall 23V-651 covers 2013-2015 Santa Fe and 2013 Santa Fe Sport: brake fluid can leak past ABS motor-shaft O-rings onto the controller PCB and short it, with fire risk; remedy = lower-amperage ABS fuse. source ↗
- 2010-2013 Kia Soul (AM): NHTSA recall 23V-652 lists 'SOUL/2011-2013': the HECU may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗
- 2011-2015 Kia Optima (TF, gasoline): NHTSA recall 23V-652 (2011-2015 Optima and other Kias): the Hydraulic Electronic Control Unit may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse, park outside until repaired. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗
- 2011-2015 Kia Sorento (XM): NHTSA recall 23V-652 covers 2011-2014 Sorento: the HECU may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗
- 2016-2021 Kia Sportage (QL): NHTSA recall 21V-137: the electrical circuit inside the HECU may short and draw excessive current, risking an engine-compartment fire; warnings include TPMS/ABS/MIL lights, burning smell, smoke. Cause stated as unknown; remedy = replace fuses in the junction box (plus HECU software on EPB cars). source ↗
Is C1611 the ABS module?
C1611 is listed for 8 vehicle lines from Hyundai and Kia; the meanings above fall under the “Communication — no response from the ABS module” family of codes.
This family of codes says the ABS module is not answering on the vehicle’s network: a scan tool cannot connect to it, or another module (engine, instrument cluster, body) stores a “lost communication” U-code about it. The ABS module may be dead, its network transceiver may have failed, or it may be fine and unreachable because it has no power, no ground, or a broken network wire. Which of those it is decides whether the module needs repair.
Is the module the likely cause? Often
For this family of codes the module is a likely cause, but not the only one. When every other module on the network answers and only the ABS module is silent, and its power, ground and network pins are good at its connector, the module itself is the likely cause — its power supply or network transceiver has failed. A blown fuse, a corroded ground, a connector pin pushed out, or a network wire chafed through sets the same code from outside, so those come first.
Check these first
In order. The first three are the same for every ABS code; the rest are for this family. Each step is something a shop or a careful owner can do before any module comes out.
- Load-test the battery and measure the charging voltage; a weak or over-charging supply sets codes in every ABS family and is the cheapest thing to rule out.
- Check the fuses that feed the ABS module and its pump with a meter, not by eye, and clean and tighten the module’s ground strap and main power feed.
- Unplug the module connector and look at both halves for corrosion, water, a pushed-back or bent pin; then clear the code and note whether it returns at once, after a drive, or only under one condition.
- Try to connect to the ABS module directly with a scan tool, and check which other modules answer — if several are missing, the fault is in the network or the power to that area, not in the ABS module.
- Back-probe the module connector for battery voltage on its power pins, ignition voltage with the key on, and a good ground on the ground pins.
- Check the network wires (CAN high and low) at the module connector for the expected pair resistance with the battery disconnected, and look for chafing where the harness passes the frame or the brake lines.
- Read the codes in the other modules: a U-code about the ABS module alone points at the ABS module; U-codes about several modules point at the network.
- If power, ground and network wiring are good at the connector and the module still does not answer, stop there — the module is the remaining cause.
What the lab does for a code in this family
At the bench we power the module and talk to it over its network pins; a module that does not answer gets its power supply and network transceiver repaired, then the full bench test. A module that is silent in the car can still give up its data on the bench, which is what lets a refurbished unit be cloned when a repair is not possible.
Every repair is bench-tested and ships back with your VIN and coding on it. Sensors, switches, plug-in relays, wiring, fuses, the battery and the other modules are vehicle-side parts: a repaired module does not fix those, which is why the checks come first.
Repair options for these vehicles
- Mando ABS / ESC7 vehicle lines on this pageRepair from $499 · refurbished unit with your data from $950
- Unit identified on the bench (any make)1 vehicle line on this pageRepair from $499 · refurbished unit with your data from $950
- Time: about a week on the bench; rush repair 2–3 business days for +$100.
- Warranty: 1-year on every repair and refurbished unit. It is included with every order and starts the day we ship it back.
- Shipping: the label to us is prepaid; return Standard return shipping $29.95 (3–5 business days) · UPS 2nd Day Air return $54.95 (2 business days) · UPS Next Day Air return (overnight) $94.95 (Next business day).
- Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Related codes
Codes listed for the same vehicle lines — the ones a scan tool tends to show next to C1611.
- C21127 shared vehicle linesPump motor, motor relay or relay circuit
- C24027 shared vehicle linesPump motor, motor relay or relay circuit
- C16046 shared vehicle linesControl module internal fault
- C11022 shared vehicle linesSupply voltage to the module
- C16052 shared vehicle linesCommunication — no response from the ABS module
C1611 — questions
What does C1611 mean on a Hyundai?
On the Hyundai lines in our data, C1611 is listed as: CAN time-out ECM: no engine control module message reaches the HECU within 500 ms; ESC control is switched off, ABS/EBD stay active. In general terms it belongs to the “Communication — no response from the ABS module” family — other modules cannot talk to the ABS module, or it is missing from the vehicle network. Kia lists the same number with its own wording — see the meaning-by-vehicle table.
Can I drive with C1611?
With no communication, the ABS and stability control are off, and other systems that use the wheel speeds — cruise control, hill-start assist, some transmissions and speedometers — can act up too. The base brakes keep working. If the speedometer or the transmission is affected, have the vehicle checked where it sits. That is general guidance for this family of codes, not a judgment of your vehicle, which we cannot make from a code.
Is C1611 the ABS module or a sensor?
For this family of codes the module is a likely cause, but not the only one. When every other module on the network answers and only the ABS module is silent, and its power, ground and network pins are good at its connector, the module itself is the likely cause — its power supply or network transceiver has failed. A blown fuse, a corroded ground, a connector pin pushed out, or a network wire chafed through sets the same code from outside, so those come first.
How much does it cost to fix C1611?
Repair of your own module starts at $499 for the vehicles that set C1611; a refurbished unit of the same family with your data cloned onto it starts at $950. Return shipping starts at $29.95 and the label to us is prepaid; rush repair is +$100 for 2–3 business days on the bench; every repair and refurbished unit carries a 1-year warranty, from the day we ship it back. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.
Will C1611 clear after the repair?
A repaired module comes back tested on the bench with your VIN and coding on it; after installation the code is cleared with a scan tool. Some vehicles still need a brake bleed, initialization or calibration after install. If the cause was on the vehicle side — a sensor, the wiring, the battery or another module — the code returns until that is fixed, which is why the checks above come first.
Which vehicles set C1611?
In our data C1611 is listed for 8 vehicle lines from Hyundai and Kia: 2011-2015 Hyundai Elantra (MD sedan, JK coupe), 2013-2018 Hyundai Santa Fe (DM, 3-row), 2011-2014 Hyundai Sonata (YF, gasoline), 2010-2015 Hyundai Tucson (LM / ix35) and 4 more. The same number can mean something different on each make, so the table above gives the meaning per vehicle.
Still not sure?
Send us C1611, a photo of the module label and your VIN — we tell you whether the module is the likely cause and what it costs, before you pull anything. Asking costs nothing.
Repair guides
The lab
ABS Module Lab
1168 W Pioneer Parkway
Arlington, TX 76013
- Phone and text: (817) 505-4201
- Email: repairs@absmodulelab.com
- Hours: Mon–Sat 9:00 AM–7:00 PM Central
Mail-in only — ship your module to the address in your order e-mail, not to the bench.
C1611 keeps coming back after the checks? Fix the module — from $499.
Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.
Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100
Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com