ABS Module Lab

Kia · 2011-2015 · Mando

Kia Optima (TF, gasoline) ABS module repair

Mail in your Kia Optima (TF, gasoline) ABS module with our prepaid label. It comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

Safety recall — check it first

NHTSA recall 23V-652 (2011-2015 Optima and other Kias): the Hydraulic Electronic Control Unit may short electrically and cause an engine-compartment fire; remedy = replace the HECU fuse, park outside until repaired. Kia's Part 573 report says 'Exact cause of the short circuit remains unknown.' source ↗

A recall may cover only some of these vehicles. Enter your VIN at nhtsa.gov/recalls before sending us anything. We would rather you get it fixed free: if the recall is open on your VIN, the dealer remedy costs you nothing.

  • Unit: Mando
  • Stability control: depends on trim
  • 2 sourced part numbers
  • 4 fault codes

The ABS module in the Kia Optima (TF, gasoline)

The 2011-2015 Kia Optima (TF, gasoline) uses this ABS unit: Mando hydraulic unit assembly / ABS pump control module (HECU). source ↗ On our bench that puts it in the Mando ABS / ESC family, alongside 6 other vehicle lines on this site.

Its ABS module appears under 2 part numbers, starting with 58920-2T550 ('Abs Anti-Lock Brake Pump Control Module' / Hydraulic Unit Assembly; 2011-2013 Optima sedan 2.0L and 2.4L Theta 2; part code 58910B). source ↗ What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.

Compare: a new unit

58920-2T550 listed online, part only (as of October 2026)

$1,308.83

source ↗

Repairing the one you own

From $499

Already coded to your VIN · 1-year warranty

Kia Optima (TF, gasoline) ABS module part numbers

Match the number printed on your module's label. Each number opens its own page — the vehicles it fits, the unit and the price — and parts-catalog sources are linked.

  • 'Abs Anti-Lock Brake Pump Control Module' / Hydraulic Unit Assembly; 2011-2013 Optima sedan 2.0L and 2.4L Theta 2; part code 58910B

  • Hydraulic unit assembly; 2012 Optima sedan 2.0L and 2.4L Theta 2 (printed 589202T560)

Reading the label · Hyundai / Kia

5-5 numbers. 58920-xxxxx = hydraulic unit assembly (ABS/ESC module with pump, Hyundai/Kia part code 58910B); 58910-xxxxx = 'ABS pump control module' on some models (Soul, Santa Fe CM); NHTSA recall 23V-651 identifies the ABS module family as '58900-*****'. Kia catalogs drop the dash (589202T550). source ↗

e.g. 58920-3X950 · 58920-2T550 · 589201U000

ABS fault codes on the Kia Optima (TF, gasoline)

  • C1604

    HECU hardware error: EEPROM data mismatch or abnormal RAM, register, interrupt, timer or A/D operation detected by the HECU processors; cause: faulty HECU

  • C1611

    HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU

  • C2112

    HECU solenoid valve relay voltage fault: open or short in the valve relay supply to the solenoid valves inside the HECU; causes: power supply circuit or HECU

  • C2402

    ABS pump motor voltage fault: motor relay or fuse open, open or short in the motor, or motor lock

Our promise

Can’t be repaired? You don’t pay for a repair.

If the bench finds your module past repair, we stop and tell you before doing anything else. Then you choose:

  1. 1A replacement — a refurbished unit of the same family with your VIN, coding and configuration cloned onto it, from $950. You pay only the difference from what you already paid, and we confirm the amount with you first.
  2. 2Your module back — with the repair price refunded, minus shipping costs and a $150 bench evaluation fee.

Either way, nothing that changes your price happens without your OK.

Refund stages in our terms →

Other vehicles with the Mando

Same unit family, same bench process and the same starting price.

All Mando ABS / ESC vehicles →

Kia Optima (TF, gasoline) ABS module questions

Which ABS module is in the Kia Optima (TF, gasoline)?

It uses this unit: Mando hydraulic unit assembly / ABS pump control module (HECU). We price and bench it as part of the Mando ABS / ESC family. The exact unit is confirmed from your module label on arrival.

How much does ABS module repair cost for a Kia Optima (TF, gasoline)?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new part (58920-2T550) is listed online at $1,308.83 for the part alone, as of October 2026. Return shipping starts at $29.95 and the label to us is prepaid.

My Kia Optima (TF, gasoline) module number is not listed. Can you still repair it?

The 2 numbers above are the ones we could source, not every one that exists. Send us a photo of the label first, or order the repair and we confirm the unit before any work.

Is there a recall on the Kia Optima (TF, gasoline) ABS unit?

There is a recall on this unit for some of these vehicles (source linked above). Check your VIN at nhtsa.gov/recalls first — if the recall is open on your car, the dealer remedy is free.

Repair guides

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

Kia Optima (TF, gasoline) ABS light on? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair