ABS Module Lab

ABS module part number · Mando · Hyundai / Kia format

58920-2T550 — ABS module part number(Kia Optima (TF, gasoline), 2011-2015)

58920-2T550 is listed for the 2011-2015 Kia Optima (TF, gasoline). Mail the module in with our prepaid label and it comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping and a $150 bench evaluation fee.

  • Unit: Mando
  • 1 vehicle line
  • 4 fault codes

Vehicles that use 58920-2T550

Each line as the source states it. Parts-catalog sources are linked; confirm against the label on your own module.

MakeModelYearsUnit familyNote
KiaOptima (TF, gasoline)2011-2015Mando ABS / ESC'Abs Anti-Lock Brake Pump Control Module' / Hydraulic Unit Assembly; 2011-2013 Optima sedan 2.0L and 2.4L Theta 2; part code 58910B source ↗

What this number tells you

Label format · Hyundai / Kia

5-5 numbers. 58920-xxxxx = hydraulic unit assembly (ABS/ESC module with pump, Hyundai/Kia part code 58910B); 58910-xxxxx = 'ABS pump control module' on some models (Soul, Santa Fe CM); NHTSA recall 23V-651 identifies the ABS module family as '58900-*****'. Kia catalogs drop the dash (589202T550). source ↗

e.g. 58920-3X950 · 58920-2T550 · 589201U000 · 58910-2K200

Spaces, dots and dashes do not matter: 58920-2T550 is the same number however it is printed. A label often carries both the vehicle maker's number and the supplier's own number for the same module — either one identifies it.

Known failures on this unit

What brings a Mando to the bench, in general terms:

  • ●ABS, traction and stability warning lights on together
  • ●Scan tool cannot talk to the ABS module (no communication / U-codes in other modules)
  • ●Pump-motor or valve (solenoid) circuit codes that return after clearing
  • ●Intermittent faults that come and go with temperature or bumps
  • ●Wheel-speed signal codes on more than one wheel at once

Fault codes seen on these vehicles

As the sources state them for the vehicle lines above. A code says where to look — the module is the cause when it returns after the fuses, grounds, connector and wheel-speed sensors check out.

CodeMeaningVehicle
C1604HECU hardware error: EEPROM data mismatch or abnormal RAM, register, interrupt, timer or A/D operation detected by the HECU processors; cause: faulty HECU Kia Optima (TF, gasoline)
C1611HECU CAN communication error: no valid CAN message from the engine ECU for about 500 ms; causes: engine control module or HECU Kia Optima (TF, gasoline)
C2112HECU solenoid valve relay voltage fault: open or short in the valve relay supply to the solenoid valves inside the HECU; causes: power supply circuit or HECU Kia Optima (TF, gasoline)
C2402ABS pump motor voltage fault: motor relay or fuse open, open or short in the motor, or motor lock Kia Optima (TF, gasoline)

Repair, refurbished or new: your options for 58920-2T550

The new-part price is the part alone, from an online parts catalog, as of October 2026.

  • Repair your 58920-2T550

    From $499

    + return shipping

    • Your own module, repaired and tested on the bench
    • Keeps your VIN and coding — it is your module
    • About 1 week on the bench; rush 2–3 business days for +$100
    • 1-year warranty on our work, from the day we ship it back
    Start my repair →
  • Refurbished unit with your data

    From $950

    + return shipping

    • A refurbished unit of the same family, tested on the bench
    • Your VIN, coding and configuration written in from your original
    • Your original stays with us as the core — no separate core charge.
    • About 1 week on the bench; rush 2–3 business days for +$100, once your original arrives

    No advance exchange: your original module has to reach the bench first, because your vehicle’s data (VIN, coding and configuration) is read out of it and written into the refurbished unit. That is what lets the refurbished module install like your own.

  • New 58920-2T550 (part only)

    $1,308.83

    catalog price, as of October 2026 source ↗

    • A new unit from a parts catalog — the part alone
    • Not coded to your vehicle — set up after install per the maker's procedure
    • Shipping time and warranty as the parts catalog states them

Plus return shipping from $29.95. The label to our lab is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it. Some vehicles still need a brake bleed, initialization or calibration after install.

What to ship

What comes out depends on the unit. Send us a photo of it before you pull anything and we confirm what to ship.

Write your RMA number on the box and use the prepaid label we e-mail you after checkout — step-by-step mail-in instructions.

Related part numbers

Other numbers on the same vehicle lines — the closest to 58920-2T550 first.

All Kia part numbers →

58920-2T550 questions

Can 58920-2T550 be repaired instead of replaced?

Yes — that is the service. Mail in your 58920-2T550 module with our prepaid label; we bench-test and repair it and it comes back still coded to your VIN, from $499 plus return shipping, with a 1-year warranty. If the bench finds it past repair, we stop and tell you first: a refurbished unit with your data cloned onto it from $950, or your repair price back minus shipping and a $150 bench evaluation fee.

Which vehicles use 58920-2T550?

It is listed for the 2011-2015 Kia Optima (TF, gasoline). The note on file reads: 'Abs Anti-Lock Brake Pump Control Module' / Hydraulic Unit Assembly; 2011-2013 Optima sedan 2.0L and 2.4L Theta 2; part code 58910B. Match the number on your own module label rather than the year alone — different numbers usually separate model years, drivetrains and option packages.

Will I need programming after the repair?

Your VIN and coding come back on the module, so there is no dealer programming visit for it — but installation still follows the vehicle maker’s procedure, including any brake bleeding, initialization or calibration your vehicle requires. A refurbished unit gets your VIN, coding and configuration cloned from your original before it ships, so the same applies to it.

How much does the 58920-2T550 repair cost?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. For comparison, a new 58920-2T550 is listed at $1,308.83 for the part alone (catalog price as of October 2026). Return shipping starts at $29.95 and the label to us is prepaid. Starting prices. If the bench finds more work than your service covers, we tell you the cost and you approve it before we do it.

What if it cannot be repaired?

If your module cannot be repaired, we tell you before doing anything else. You choose: a replacement — a refurbished unit of the same family with your data cloned onto it, from $950 (you pay only the difference from what you already paid, and we confirm it first) — or your module back with the repair price refunded minus shipping costs and a $150 bench evaluation fee.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

58920-2T550 on your label? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com

Repair From $499

Start My Repair