Hyundai and Kia ABS Module (HECU) Failure and C1611 Repair Guide
ABS Module Lab Team · · 18 min read
Hyundai and Kia ABS module (HECU) failures: the fire recalls to check first, what C1611 and C1604 mean, repair versus dealer prices, and how to ship the unit.

Start with the recalls: NHTSA recalls 23V-651 (Hyundai), 23V-652 (Kia) and 21V-137 (Kia Sportage and Cadenza) cover ABS hydraulic electronic control units, or HECUs, that can short internally and start an engine-compartment fire, and the dealer remedy costs you nothing, so enter your VIN at nhtsa.gov/recalls before anything else. If the recall work is done or does not apply and the HECU itself has failed, our repair of the Mando unit starts at $499 (the Optima Hybrid's unit is quoted first) and a refurbished unit carrying your car's data starts at $950. Dealer list prices on file for a new unit run from $889.36 for the 2015–2017 Sonata to $3,708.23 for the 2011–2014 Sonata.
Which Hyundai and Kia models have this ABS unit
The recalls on file
| Recall | Models and years on file | What the report describes | Remedy |
|---|---|---|---|
| 23V-651, Hyundai | 2011–2015 Elantra, 2013–2015 Santa Fe, 2013 Santa Fe Sport, 2010–2013 Tucson (170,402 Tucsons), and other Hyundai models | Brake fluid can leak past the motor-shaft O-rings onto the controller board, where a short and overcurrent can start an engine-compartment fire | A lower-amperage ABS fuse, not a new module |
| 23V-652, Kia | 2011–2015 Optima, 2011–2013 Optima Hybrid, 2011–2014 Sorento, 2011–2013 Soul, and other Kia models | The HECU may short electrically and cause an engine-compartment fire; Kia's report says "Exact cause of the short circuit remains unknown." | A replacement HECU fuse; park outside until repaired |
| 21V-137, Kia | 2017–2021 Sportage and 2017–2019 Cadenza without Smart Cruise Control | The circuit inside the HECU may short and draw excessive current, risking a fire; the cause is stated as unknown | New fuses in the junction box, plus HECU software on cars with the electronic parking brake |
21V-137 lists the warning signs as the TPMS, ABS and check-engine lights, a burning smell and smoke. If you smell burning or see smoke from under the hood, switch off and leave the car outdoors, clear of buildings, until a dealer has seen it.
Each remedy is a fuse, with HECU software added on the 21V-137 cars that have the electronic parking brake, and none on file is a new module. Ask the dealer how a unit that has already leaked or shorted is handled.
Lines, units and our service
| Vehicle page | Years | Unit on file | Recall on file | Our service |
|---|---|---|---|---|
| Elantra (MD sedan, JK coupe) | 2011–2015 | Mando brake hydraulic unit assembly (ABS module with integrated controller board) | 23V-651 | Mando repair |
| Santa Fe (DM) and Santa Fe Sport (AN) | 2013–2018 | Mando hydraulic unit assembly (ABS module / HECU) | 23V-651 for 2013–2015 Santa Fe, 2013 Sport | Mando repair |
| Tucson (LM / ix35) | 2010–2015 | Mando brake hydraulic unit assembly | 23V-651 for 2010–2013 | Mando repair |
| Sonata (YF, gasoline) | 2011–2014 | ABS/ESC hydraulic unit with integrated control module (HECU) | None in our data | Any-make repair |
| Sonata (LF, gasoline) | 2015–2019 | Hydraulic unit assembly / ABS pump module | None in our data | Any-make repair |
| Optima (TF, gasoline) | 2011–2015 | Mando hydraulic unit / ABS pump control module (HECU) | 23V-652 | Mando repair |
| Optima Hybrid | 2011–2013 | Mando hydraulic unit assembly (hybrid) | 23V-652 | Quote first |
| Sorento (XM) | 2011–2015 | Mando ABS hydraulic module | 23V-652 for 2011–2014 | Mando repair |
| Soul (AM) | 2010–2013 | Mando ABS pump control module | 23V-652 for 2011–2013 | Mando repair |
| Sportage (QL) and Cadenza (YG) | 2016–2021; Cadenza 2017–2019 | Mando HECU | 21V-137 | Mando repair |
The Mando lines belong to our Mando ABS / ESC family. Neither Sonata line has a catalog unit family; both take the any-make repair, priced from $499 too, with the label naming the unit. The Optima Hybrid's hybrid brake unit is quoted before any work through request a quote, never at a fixed price.
Two other units wear these badges: the 2009–2016 Genesis sedan and coupe and the Equus use an MK61 module, with C2200 and U0121 on file (Genesis and Equus), and the 2007–2012 Santa Fe (CM) uses a Bosch 8.0 (Santa Fe CM).
The catalogs sell each HECU as one part, pump motor, valve block and controller board together, under names such as "hydraulic unit assembly" or "hydraulic module". The exception is 58920-4Z000 for the 2013–2015 Santa Fe Sport, listed as an ABS pump without the module. Until a photo of your unit says otherwise, plan on shipping the complete HECU.
Symptoms of a failing ABS module on the Hyundai and Kia models
A failing HECU lights the ABS warning, usually with the stability-control (ESC) light, and anti-lock braking and stability control stop working while ordinary braking carries on. The codes on file add detail:
- C1611 switches stability control off while ABS and electronic brake-force distribution stay active (the Elantra meaning on file), so the ESC light can be on while ABS still works.
- C2402 means the pump motor is not doing its job, which takes anti-lock braking away.
- C1102 sets when the HECU sees low battery voltage.
- C1604 and C1605 are the unit reporting its own hardware faults.
If a recall fuse has already been fitted and the ABS and ESC lights come on later, have that fuse checked first: a fuse that has opened means its circuit drew more current than the fuse allows, so tell the dealer. A red brake warning, a soft pedal or a falling fluid level can be a hydraulic matter for a mechanic before the car is driven.
The fault codes you will see
The scan tool has to address the ABS/ESC unit to read these.
| Code | Meaning on file | What it points to |
|---|---|---|
| C1604 | ECU hardware error: the HECU finds a fault in its own memory, registers or A/D converter (the Kia lines add EEPROM data mismatch) | The HECU itself; the Kia meaning names a faulty HECU as the cause |
| C1605 | CAN hardware error: the HECU detects a CAN RAM malfunction | The HECU's own network hardware |
| C1611 | CAN time-out: no engine-control message reaches the HECU within about 500 ms | The engine control module, the network wiring, or the HECU |
| C2112 | Valve relay error: the solenoid-valve relay supply is out of range or missing | Wiring or connector, the valve relay, a poor ground, or the HECU |
| C2402 | Pump motor failure: motor relay or fuse open, an open or short in the motor, or a locked motor | The fuse first, then the motor and the HECU's motor circuit |
| C1102 | Battery voltage low at the HECU | The battery and charging system, not the module |
C1611: clear the engine computer before blaming the HECU
C1611 means the HECU stopped hearing from the engine computer for about half a second. The meanings on file name two suspects, the engine control module and the HECU; the network wiring between them and battery voltage need ruling out too. Read the engine computer and other modules for codes, inspect the CAN connections at both ends and test the battery; if the engine computer talks to every other module and the HECU still logs C1611, particularly beside C1605, suspect the HECU's network side.
When no tool can reach the HECU at all, other modules may store a lost-communication code such as U0121. Check the HECU fuses, including any recall fuse, then its ground and connector, before calling the unit dead. Our guide to internal-failure codes by make sets these beside other makes' codes.
Why these modules fail
The recall reports describe the two failure paths on file. On the Hyundai units in 23V-651, brake fluid can seep past the O-rings on the ABS motor shaft and reach the controller board, where it can cause a short and an overcurrent. On the Kia units in 23V-652 and 21V-137, the HECU may short internally, and Kia's own reports call the cause unknown.
Brake fluid on a circuit board can corrode as well as short it, so traces and joints it has wetted can keep degrading after the first fault.
The other codes on file trace to parts of the module: the pump-motor circuit (C2402), the valve relay supply (C2112), the processor and memory (C1604) and the network hardware (C1605). Outside the module sit low battery voltage (C1102), an engine computer or wiring fault behind C1611, an open fuse behind C2402, the wheel-speed sensors and their wiring, and any valve sticking in the block, which no board repair reaches.
Check these before you condemn the module
- Recall status first. Run the VIN at nhtsa.gov/recalls; an open recall goes to the dealer before anything is removed.
- Look for brake fluid. A wet or stained HECU body or connector, or a reservoir that keeps dropping, can be a sign of the leak the Hyundai recall describes; tell the dealer what you found.
- Battery and charging. Charge and load-test the battery and check charging voltage, since C1102 and a cluster of network codes can come from voltage alone.
- Fuses. Check the HECU's motor and valve fuses from both sides, and never fit a larger fuse in place of a recall fuse that has opened.
- Ground and connector. With the battery disconnected, unplug the HECU and look for fluid, corrosion and pins pushed back; C2112's meaning lists a poor ground among its causes.
- The engine-computer side of C1611. Prove the engine computer and network wiring first, as described above.
- Wheel-speed live data. If wheel-speed codes are stored too, graph all four wheels on a slow drive to find the corner.
- The communication test. With battery feed, ignition feed, ground and the CAN wiring confirmed at the connector and still no answer from the HECU, the unit is the suspect.
Hand the car to a dealer at once if there is a burning smell or smoke, and to a mechanic if the pedal has changed or the job is beyond your tools. Write down what your scan tool shows and what the car is doing, because the order form asks for both.
Repair, refurbished, used or new: what each really costs
Every price of ours here is a starting price, and anything beyond the service gets your approval first. A refurbished unit, with your VIN coding and configuration cloned from your original, is from $950 on every priced line.
| Line | Our repair | New unit, dealer list price on file |
|---|---|---|
| Elantra 2011–2015 | From $499 | $1,651.02 (58920-3X660, 2011–2013 coupe) |
| Santa Fe and Santa Fe Sport 2013–2018 | From $499 | $1,289.15 (58920-4Z000, 2013–2015 Sport, listed without the module) |
| Tucson 2010–2015 | From $499 | None on file; 58920-2S400 is listed as discontinued |
| Sonata 2011–2014 | From $499, any-make repair | $3,708.23 (58920-3Q500) |
| Sonata 2015–2019 | From $499, any-make repair | $889.36 (58920-C2500, 2015–2017 cars) |
| Optima 2011–2015 | From $499 | $1,308.83 (58920-2T550, 2011–2013) |
| Optima Hybrid 2011–2013 | Quoted first | Not quoted here |
| Sorento 2011–2015 | From $499 | $1,356.84 (58920-1U000, 2013–2014) |
| Soul 2010–2013 | From $499 | $1,431.90 (58910-2K200, 2012–2013) |
| Sportage 2016–2021 | From $499 | $928.35 (58920-D9100, 2016–2019) |
Where a new HECU is the better buy
Two new units list below our $950 refurbished price: $889.36 for the 2015–2017 Sonata and $928.35 for the Sportage. On those cars a refurbished unit from us costs more than new, so weigh our repair, from $499, against the new part plus the installer's charges; new wins when the dealer has it and that total is close to our repair plus shipping, or when the unit is too damaged to repair.
Everywhere else on the list, new costs well over our refurbished price, up to $3,708.23 for the 2011–2014 Sonata, though the Santa Fe part is listed without the module, so check what it includes. A used HECU has no history and another car's coding, and on a recalled model it is the very part the recall describes. List prices are catalog prices on the day they were read, not quotes; our replacement-cost guide sets them beside other makes.
Shipping and timing:
- Return shipping is added at checkout: $29.95 standard, which takes three to five business days, $54.95 for UPS 2nd Day Air, and $94.95 for the overnight UPS Next Day Air.
- The label to us is ours to buy, emailed after payment as USPS ground, or as UPS 2nd Day Air if you add rush inbound (+$55).
- On the bench, a HECU takes about a week; rush repair at +$100 makes it 2–3 business days.
- Warranty: each repair and refurbished unit includes our 1-year warranty, as the warranty page sets out.
If the bench finds a HECU past repair, you hear from us first and decide: a refurbished unit for the difference from what you paid, confirmed beforehand, or your unit back with the repair price refunded, minus shipping and a $150 bench evaluation fee. A refurbished unit is built from data read out of your original, so none ships before the original arrives, and the original stays with us as the core once one is made, with no separate core charge.
Order a Mando unit through Mando ABS repair; the Mando family page lists the vehicles on file for this unit.
Removing and shipping the module
Have any open recall done first: the remedy costs nothing and the dealer sees the unit before it comes out. A car with its HECU removed has open brake lines and cannot be driven, so do the removal where the car can stay.
- Photograph the HECU and its label and send the photos through the quote form; they confirm the number and whether the controller can ship alone.
- Disconnect the battery and take the key out before touching the connector.
- Photograph the brake lines so each goes back to the same port.
- Unlatch the connector fully and pull it straight off; a half-open lock breaks.
- Remove the lines one at a time, capping each port and each line end straight away, and keep fluid off the paint.
- Unbolt the HECU from its bracket and keep it upright so residual fluid stays inside.
- Seal it in a plastic bag and box it with no less than two inches of cushioning around it. Write the RMA on the carton and on a slip inside, then attach the prepaid label from your email; the mail-in instructions walk through the packing.
What happens at the bench
Your HECU is logged against its RMA and its label photographed. Powered on the bench, it is questioned: we read the data and codes it stored, then drive its motor and valve stages under load to find the one that failed. Failed parts are replaced on your own board, the load tests are repeated, and the unit ships back with its coding as it came in; fluid damage beyond repair stops the job until you choose. How it works covers each stage.
After it is back in the car
With the brake lines off, the system needs a complete bleed once the HECU is refitted, run on many of these cars through the scan tool's HECU bleed function. Some vehicles still need a brake bleed, initialization or calibration after install. Any new dealer HECU raises two questions for the installer: whether it needs programming, and what that costs.
Clear the codes, then drive and recheck: C1611 should stay away once the engine computer and HECU are talking, and the ABS and ESC lights should go out. If your car is in one of the recalls and the remedy was never done, book it now.
Part numbers for the Hyundai and Kia models
The part-number lookup takes these numbers with or without the dash. Notes from the parts catalogs and recall reports:
| Part number | Note |
|---|---|
| 58920-3X950 | Brake hydraulic unit assembly; 2011–2013 Elantra coupe and sedan, DOHC GDI/MPI; part code 58910B |
| 58920-3X660 | Brake hydraulic unit assembly; 2011–2013 Elantra Coupe 2-door, DOHC GDI/MPI |
| 58920-4Z000 | Listed as "Sport Abs Pump Without Module"; 2013–2015 Santa Fe Sport, DOHC GDI and TCI/GDI |
| 58920-2S400 | Brake hydraulic unit assembly; 2009–2013 Tucson wagon, DOHC MPI; part code 58900B; discontinued |
| 58920-3Q500 | "Abs Pump Module" hydraulic unit assembly; 2009–2014 Sonata sedan, DOHC GDI and TCI/GDI; related 58920-3Q600 |
| 58920-C2500 | "Anti-Lock Brake Abs Pump Module Assembly"; 2015–2017 Sonata sedan, DOHC GDI and TCI/GDI; part code 58910B |
| 58920-C2610 | Brake hydraulic unit assembly; 2018–2019 Sonata sedan GDI / TCI-GDI |
| 58920-2T550 | "Abs Anti-Lock Brake Pump Control Module"; 2011–2013 Optima sedan 2.0L and 2.4L Theta 2; part code 58910B |
| 58920-1U000 | ABS hydraulic module; 2013–2014 Sorento 5P/7P, 2.4L Theta 2 and 3.3L Lambda 2 |
| 58910-1U860 | ABS pump module; 2011–2012 Sorento 2.4L Theta 2 and 3.5L Lambda 2, 5- and 7-passenger |
| 58910-2K200 | ABS pump control module; 2012–2013 Soul wagon, 1.6L Gamma and 2.0L Nu |
| 58920-D9100 | Sportage HECU named in 21V-137 (2017–2021 Sportage without Smart Cruise Control); catalog: 2016–2019 Sportage 2.0/2.4 Theta 2 |
Also on file: 58920-3X650 (2011–2013 Elantra); 58920-2W800 (Santa Fe DM); 58920-2S310 (Tucson ix); 58920-3S400, 58920-3S050 and 58920-3Q650 (2011–2014 Sonata); 58920-C2200 and 58920-C2201, the second listed as replacing or working with the first (2015–2017 Sonata); 58920-2T560 (2012 Optima); 58910-1U960 (2011–2012 Sorento); 58910-2K600, 58910-2K800, 58910-2K660, 58910-2K860, 58910-2K640 and 58910-2K840 (2010–2011 Soul); 58920-4U050 (Optima Hybrid); and 58920-F6210 (Cadenza, named in 21V-137). The characters after the first five digits identify the exact version, so match those.
FAQ
Is my Hyundai or Kia ABS module part of a recall?
Several Hyundai and Kia lines are covered: NHTSA recalls 23V-651 (2011–2015 Elantra, 2013–2015 Santa Fe, 2010–2013 Tucson and other Hyundais), 23V-652 (2011–2015 Optima, 2011–2014 Sorento, 2011–2013 Soul and other Kias) and 21V-137 (2017–2021 Sportage and 2017–2019 Cadenza) concern the ABS control unit and a fire risk. Enter your VIN at nhtsa.gov/recalls to see whether your car is included; the dealer remedy is free.
What does C1611 mean on a Hyundai or Kia?
C1611 is a CAN time-out: the HECU has not received a message from the engine computer for about 500 ms. On the 2011–2015 Elantra, the meaning on file says stability control is switched off while ABS and brake-force distribution stay active. The cause can be the engine control module, the wiring between them or the HECU, so prove the engine computer before replacing anything.
How much does it cost to repair a Hyundai ABS module?
Repairing a Hyundai or Kia HECU costs from $499 here (the Optima Hybrid unit is quoted first), a refurbished unit with your car's cloned data from $950, and return shipping from $29.95 at checkout. Dealer list prices on file for a new unit run from $889.36 to $3,708.23 depending on the model. Ours are starting prices, and anything extra waits for your approval.
Is a new Kia or Hyundai HECU cheaper than a refurbished one?
On two lines it is: the Sportage unit 58920-D9100 lists at $928.35 and the 2015–2017 Sonata unit at $889.36, both under our $950 refurbished price. For those cars, compare our $499 repair with the new part plus the installer's charges. On the other priced lines, a new HECU lists for more than a refurbished unit.
What is a HECU on a Hyundai or Kia?
HECU stands for hydraulic electronic control unit, the Hyundai and Kia name for the ABS and stability-control unit. It combines the pump motor, the valve block carrying the brake lines and the controller board in one assembly in the engine compartment. On most of the lines in this guide it is a Mando unit.
Can I drive my Kia with the ABS and ESC lights on?
With no burning smell, no smoke and no open recall, a Kia or Hyundai showing these lights still brakes, but without anti-lock or stability assistance, so drive gently and get it checked soon. A car in an open fire recall follows its notice, which for 23V-652 means parking outside until the remedy is done. Do not drive it if the red brake warning is on or the pedal has changed.
Does a repaired Hyundai or Kia HECU need programming?
Your own HECU comes back with the coding stored in it, and a refurbished HECU is written with your car's data before shipping; after either, follow the bleed and any setup the scan tool calls for. For a new dealer HECU, ask the installer whether it needs programming and what that adds. Programming and installation are outside what the lab does.
What happens if my Kia HECU cannot be repaired?
Nothing more is done until you pick one of two routes: a refurbished HECU loaded with your Kia's data, for the confirmed difference, or your own HECU returned with the repair price refunded, minus shipping and a $150 bench evaluation fee. We keep your original HECU as our core only when a refurbished one is built from it.
What warranty comes with a Hyundai or Kia HECU repair?
A 1-year warranty on our work comes with each HECU repair and each refurbished unit, starting the day it ships back, at no extra cost. It is the one warranty we offer, and it covers our repair or the unit we supplied, not the car's sensors, wiring or brake lines.
Sources
- NHTSA recall 23V-651, Hyundai ABS module fire risk: https://static.nhtsa.gov/odi/rcl/2023/RCLRPT-23V651-6950.PDF
- NHTSA recall 23V-652, Kia HECU fire risk (Kia's Part 573 report): https://static.nhtsa.gov/odi/rcl/2023/RCAK-23V652-7830.pdf
- NHTSA recall 21V-137, Kia Sportage and Cadenza HECU: https://static.nhtsa.gov/odi/rcl/2021/RCLRPT-21V137-9464.PDF
- C1611 on a 2011–2014 Sonata (Hyundai owner forum): https://www.hyundai-forums.com/threads/c1611-can-time-out-ems.720761/
- Hyundai catalog, Elantra 58920-3X660: https://www.hyundaipartsdeal.com/genuine/hyundai-hydraulic-unit-assy~58920-3x660.html
- Hyundai catalog, Santa Fe Sport 58920-4Z000: https://www.hyundaipartsdeal.com/genuine/hyundai-hydraulic-unit-assy~58920-4z000.html
- Hyundai catalog, Sonata 58920-3Q500: https://www.hyundaipartsdeal.com/genuine/hyundai-hydraulic-unit-assy~58920-3q500.html
- Hyundai catalog, Sonata 2015–2017: https://www.hyundaipartsdeal.com/genuine/hyundai-hydraulic-unit-assy~58920-c2500.html
- Kia catalog, Optima 58920-2T550: https://www.kiapartsnow.com/genuine/kia-hydraulic-unit~589202t550.html
- Kia catalog, Sorento 58920-1U000: https://www.kiapartsnow.com/genuine/kia-hydraulic-modul~589201u000.html
- Kia catalog, Soul 58910-2K200: https://www.kiapartsnow.com/genuine/kia-hydraulic-modul~589102k200.html
- Kia catalog, Sportage 58920-D9100: https://www.kiapartsnow.com/genuine/kia-hydraulic-unit-assy~58920d9100.html


