ABS Module Lab

Jaguar · repair from $499

Jaguar ABS module repair

Every Jaguar line we've mapped — 4 vehicle lines from 1995–2020 and 17 sourced part numbers — with the ABS unit each one uses. Repair your own module from $499; it comes back with your VIN and coding, no dealer programming.

Model not listed? We repair Jaguar ABS modules beyond this list — start an any-make repair or send us the label.

Known Jaguar ABS failures

What the sources report for these models, before anything else is replaced.

Reading a Jaguar ABS part number

ATE / Continental Teves (supplier number, all brands)

Read as 10.0xxx-xxxx.x: control units 10.0960-/10.0961-/10.0926-/10.0948- with '.3', hydraulic units 10.0212-/10.0204-/10.0399- with '.4'. Often run together as 11 digits.

e.g. 10.0960-0818.3 · 10.0961-0820.3 · 10.0212-0044.4

Ford-style number (Jaguar / Land Rover, Ford era)

Prefix (4 chars: year letter/digit + vehicle code) + base + suffix.

e.g. BJ32-2C405-AG · GX53-2C353-AH · EX53-14F447-BC

Jaguar (pre-Ford numbering and later Jaguar numbers)

1995-2003 Jaguar ABS modules: three letters + '2210' + two-letter suffix (LNA/LNC/LNF/LJA/MNA 2210 xx), plus JLM + 5 digits on the 1995-1997 module. Later Jaguar part numbers: C2x / T2x + 4-5 digits (e.g. C2Z28243, T2R22161).

e.g. LNC2210AD · LNA 2210-AA · MNA 2210-AB

Bosch (supplier number, all brands)

10-digit Bosch number on a white label.

e.g. 0 265 950 080 · 0265950958 · 0 273 004 358

ABS codes seen on Jaguar models

  • C1095 — DSC module pump failure: pump power-supply circuit open or shorted to ground, pump ground circuit open or high resistance, or module failure
  • C1137 — DSC module malfunction (module failure); also turns on the check-engine light
  • C1145 — Right-front wheel speed sensor circuit fault: open circuit, short to battery voltage or ground, high resistance, or sensor failure
  • C1267 — DSC module anti-lock functions temporarily disabled (module failure); attempt a hard reset before replacing the module
  • C1233 — Left-front wheel speed sensor signal missing: air gap too large, reluctor damage, high-resistance signal circuit, or sensor failure
  • B1676 — ABS/TC module supply voltage out of range: system switches off above 19 V and is inhibited below 9 V
  • C1222 — Wheel speed signal conflict: punctured tyre, mismatched wheel/tyre sizes, or damaged reluctor teeth
  • C1266 — Modulator solenoids power supply circuit fault (open circuit, short circuit, high resistance) or modulator failure

Jaguar ABS module questions

Which Jaguar ABS modules do you repair?

This page lists 4 Jaguar vehicle lines from 1995–2020, built around 4 ABS unit families. Models outside the list are taken too — order the any-make repair and we identify the unit from the label.

How much is Jaguar ABS module repair?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95; the label to us is prepaid.

Where is the part number on a Jaguar ABS module?

On the label of the electronic module itself. Read as 10.0xxx-xxxx.x: control units 10.0960-/10.0961-/10.0926-/10.0948- with '.3', hydraulic units 10.0212-/10.0204-/10.0399- with '.4'.

The lab

ABS Module Lab

1168 W Pioneer Parkway
Arlington, TX 76013

View on Google Maps

Mail-in only — ship your module to the address in your order e-mail, not to the bench.

ABS light on? Fix the module you already own.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping and a $150 bench evaluation fee · 1-year warranty · rush 2–3 days +$100

Call (817) 505-4201 · 📱 Text us a photo of the module label · Confirm my module first — free · Email repairs@absmodulelab.com