ABS Module Lab
Start Repair

Volvo · 2002-2014 · MK25

Volvo S60 (P2) ABS module repair

Mail in your Volvo S60 (P2) ABS module with our prepaid label. It comes back repaired and still coded to your VIN — or, if it is past repair, as a refurbished unit with your data cloned on, or with your repair price refunded minus shipping.

  • Unit: MK25
  • Stability control: depends on trim
  • 15 sourced part numbers
  • 14 fault codes

Known failure

P2 brake control modules fail with no communication and ABS light on, and when the pump motor does not work or works sporadically the car logs a combination of BCM-0070/0071/0072 and BCM-C002001/C00201C/C002071 - then the module AND pump must be sent.

The ABS module in the Volvo S60 (P2)

The 2002-2014 Volvo S60 (P2) uses this ABS unit: Continental Teves (ATE) ATE MK25 / MK25E brake control module (BCM). The same unit covers the S60 (P2), S80 (P2), V70 / XC70 (P2) and XC90 (P2). On our bench that puts it in the ATE / Continental MK25 family, alongside 4 other vehicle lines on this site.

Its ABS module appears under 15 part numbers, starting with 30643982. Different numbers usually separate model years, drivetrains and option packages — match the number on your own module label rather than the year alone. The control unit is mounted on the valve block. On many units it unbolts, so the brake lines stay on — send us a photo if you are not sure.

Volvo S60 (P2) ABS module part numbers

Match the number printed on your module's label. Each number links to the page it was found on.

  • 30643982

  • 30793453

  • 30714956

  • 30714960

  • 30793445

  • 30793447

  • 30683499

  • 30683501

  • 30742259

  • 30742262

  • 30793489

  • 8671224

Show all 15 part numbers

  • 8671457

  • P08619974

  • P30643979

Reading the label · ATE / Continental Teves (supplier number, all brands)

Read as 10.0xxx-xxxx.x: control units 10.0960-/10.0961-/10.0926-/10.0948- with '.3', hydraulic units 10.0212-/10.0204-/10.0399- with '.4'. Often run together as 11 digits.

e.g. 10.0960-0818.3 · 10.0961-0820.3 · 10.0212-0044.4

Reading the label · Volvo

7-digit (older, e.g. 8619544) or 8-digit (30xxxxxx / 31xxxxxx) numbers, sometimes with a 'P' / 'P0' catalogue prefix or a separate revision letter ('30793526 AA').

e.g. 30643982 · 30793453 · 8619544

ABS fault codes on the Volvo S60 (P2)

  • BCM-0052

    Control Module Internal Fault

  • BCM-0070

    Pump Motor Faulty Signal

  • BCM-C00201C

    ABS Pump Motor Control: General Electrical Failures - Circuit Voltage Out of Range (also listed as 'Pump Motor Defect')

  • BCM-0074

    Hydraulic Valve Faulty Signal

  • BCM-0108

    Communication Fault Between Control Units

  • BCM-0058

    Power Supply Voltage too High

  • BCM-0136

    Brake Pressure Sensor 1 & 2 Outside Permitted Range

  • BCM-0139

    Pre-pressure Valve Power Brake Booster Signal Outside its Permitted Range

  • BCM-0150

    Stop Lamp Switch Signal Outside its Permitted Range

  • BCM-E003

    Configuration Fault (faulty configuration)

  • BCM-0071

    Individual meanings not given

  • BCM-0072

    Individual meanings not given

  • BCM-C002001

    Individual meanings not given

  • BCM-C002071

    Individual meanings not given

Our promise

Can’t be repaired? You don’t pay for a repair.

If the bench finds your module past repair, we stop and tell you before doing anything else. Then you choose:

  1. 1A replacement — a refurbished unit of the same family with your VIN, coding and configuration cloned onto it, from $950. You pay only the difference from what you already paid, and we confirm the amount with you first.
  2. 2Your module back — with the repair price refunded, minus shipping costs.

Either way, nothing that changes your price happens without your OK.

Refund stages in our terms →

Other vehicles with the MK25

Same unit family, same bench process and the same starting price.

All ATE / Continental MK25 vehicles →

Volvo S60 (P2) ABS module questions

Which ABS module is in the Volvo S60 (P2)?

It uses this unit: Continental Teves (ATE) ATE MK25 / MK25E brake control module (BCM). We price and bench it as part of the ATE / Continental MK25 family. The exact unit is confirmed from your module label on arrival.

How much does ABS module repair cost for a Volvo S60 (P2)?

Repair of your own module starts at $499; a replacement unit with your data cloned starts at $950. Return shipping starts at $29.95 and the label to us is prepaid.

My Volvo S60 (P2) module number is not listed. Can you still repair it?

The 15 numbers above are the ones we could source, not every one that exists. Send us a photo of the label first, or order the repair and we confirm the unit before any work.

Volvo S60 (P2) ABS light on? Fix the module you already own — from $499.

Look up your part number and order online — we email you a prepaid label to our lab. Or send us a photo of the label and your VIN first, and we'll tell you what you have and what it costs.

Back with your VIN and coding · can’t be repaired? repair price back, minus shipping · 1-year warranty · rush 2–3 days +$100

Start My RepairLook Up My Part Number

Call (817) 505-4201 · 📱 Text us a photo of the module label · Ask first — send a label photo · Email repairs@absmodulelab.com

Repair From $499

Start My Repair